This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
sc553Fdl-none(1) indicates that the device does
not use the FDL.
sc553Ansi-T1-403(2) refers to the FDL exchange
recommended by ANSI.
sc553Att-54016(3) refers to ESF FDL exchanges.
Parsed from file gdcsc553.mib.txt
Company: None
Module: GDC-SC553-MIB
This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
sc553Fdl-none(1) indicates that the device does
not use the FDL.
sc553Ansi-T1-403(2) refers to the FDL exchange
recommended by ANSI.
sc553Att-54016(3) refers to ESF FDL exchanges.
Parsed from file GDC-SC553-MIB.mib
Module: GDC-SC553-MIB
sc553NetworkFdl OBJECT-TYPE SYNTAX INTEGER { sc553Fdl-none(1), sc553Ansi-T1-403(2), sc553Att-54016(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: sc553Fdl-none(1) indicates that the device does not use the FDL. sc553Ansi-T1-403(2) refers to the FDL exchange recommended by ANSI. sc553Att-54016(3) refers to ESF FDL exchanges." ::= { sc553NetworkConfigEntry 15 }
Vendor: General DataComm, Inc.
Module: GDC-SC553-MIB
[Automatically extracted from oidview.com]
sc553NetworkFdl OBJECT-TYPE SYNTAX INTEGER { sc553Fdl-none(1), sc553Ansi-T1-403(2), sc553Att-54016(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: sc553Fdl-none(1) indicates that the device does not use the FDL. sc553Ansi-T1-403(2) refers to the FDL exchange recommended by ANSI. sc553Att-54016(3) refers to ESF FDL exchanges." ::= { sc553NetworkConfigEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6.11.2.2.1.1 | sc553NetworkConfigIndex | 0 | 0 | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance whi… |
| 1.3.6.1.4.1.498.6.11.2.2.1.2 | sc553NetworkAdminLineType | 0 | 0 | The values describe: 'auto' indicates the unit will determine framing. 'manEsf' indicates manual selection of extended superfra… |
| 1.3.6.1.4.1.498.6.11.2.2.1.3 | sc553NetworkOperLineType | 0 | 0 | The values describe: 'manEsf' indicates the current setting of Line type. 'manD4'indicates the current setting of Line type. 'u… |
| 1.3.6.1.4.1.498.6.11.2.2.1.4 | sc553NetworkInterfaceType | 0 | 0 | The operating mode of the interface. Setting the value of this object to ds1(1) configures the interface as standard DS1. Setti… |
| 1.3.6.1.4.1.498.6.11.2.2.1.5 | sc553NetworkPreequalization | 0 | 0 | Is the preequalization of the transmitter of the interface. This object interoperates with the object sc553NetworkInterfaceType.… |
| 1.3.6.1.4.1.498.6.11.2.2.1.6 | sc553NetworkAdminLineBuildout | 0 | 0 | This variable is used to set the Transmit Ntwk Build-Out value on the network side and is only valid if the sc553NetworkInterface… |
| 1.3.6.1.4.1.498.6.11.2.2.1.7 | sc553NetworkOperLineBuildout | 0 | 0 | This variable is used to report the current Ntwk build-out setting if the sc553NetworkInterfaceType is set for ds1(1). tx00dB(2)… |
| 1.3.6.1.4.1.498.6.11.2.2.1.8 | sc553NetworkOnesDensity | 0 | 0 | The ones density restriction for the interface. The values of this object define the ones density restriction that is enforced o… |
| 1.3.6.1.4.1.498.6.11.2.2.1.9 | sc553NetworkTransmitClockSource | 0 | 0 | None |
| 1.3.6.1.4.1.498.6.11.2.2.1.10 | sc553NetworkFallbackClockSource | 0 | 0 | None |
| 1.3.6.1.4.1.498.6.11.2.2.1.11 | sc553NetworkFDLdcc | 0 | 0 | Controls whether or not the DCC uses the FDL as its transport. The FDL is only available when the DS1 line type is ESF, a full D… |
| 1.3.6.1.4.1.498.6.11.2.2.1.12 | sc553NetworkAISLoopdown | 0 | 0 | The time in seconds when receiving a continuous AIS signal before a remotely initiated loopback is terminated. When this object … |
| 1.3.6.1.4.1.498.6.11.2.2.1.13 | sc553NetworkLoopbackConfig | 0 | 0 | This variable is used to set the In-Band DS1 Loopback Code Detection. none(1) refers to when the in-band loopback codes are ignor… |
| 1.3.6.1.4.1.498.6.11.2.2.1.14 | sc553NetworkLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |