Initiates and terminates self test pattern generation and detection
(active diagnostic tests) on the DSU channel. When this object
is set to other than sendNoCode(1), an active diagnostic test
is initiated, using the test pattern supplied . When this
object is set to sendNoCode(1), the active diagnostic test is
terminated.
When read, value sendNoCode(1) indicates there are no active diagnostic
tests currently running on the channel. The value sendQRSpattern(2)
indicates that a QRS test is running on the channel. The value
send511Pattern(3) indicates that a 511 test is running on the channel.
The value send3in24Pattern(4) indicates that a 3:24 test is running
on the channel. The value send2047Pattern(5) indicates that a 2047
test is running on the channel.
The value sendProgPattern(6) indicates that a user programmable
pattern test is running on the channel. The value sendProgPattern(6)
and the object gdcDsuChannelProgPattern work together.
GdcDsuChannelProgPattern defines the 16 bit user programmable pattern
for the programmable pattern test.
The values send511PatternWithLL(7), send511PatternWithRDL(8),
send2047PatternWithLL(9), send2047PatternWithRDL(10) indicate that
the given pattern test is running in conjunction with a local loop (LL)
or remote digital loop (RDL). gdcDsuChannelLoopbackConfig is updated
to indicate this as well. When one of these tests are running, and this
variable is set to sendNoCode(1), both the pattern and the loopback
are terminated. However, if gdcDsuChannelLoopbackConfig is set to noLoop(1),
only the loopback portion is terminated.
This object, gdcDsuChannelTestResults, and gdcDsuChannelTestStatus
work together as follows:
When this object is set to initiate an active diagnostic test,
gdcDsuTestResults is initialized to 0 and gdcDsuChannelTestStatus
is initialized to testRunning(1). When the test is terminated,
the value of gdcDsuChannelTestStatus reflects testComplete(3).
gdcDsuChannelTestResults contains the count of bit errors detected
during the test.
Parsed from file gdcdsu.mib.txt
Company: None
Module: GDC-DSU-MGMT-MIB
Initiates and terminates self test pattern generation and detection
(active diagnostic tests) on the DSU channel. When this object
is set to other than sendNoCode(1), an active diagnostic test
is initiated, using the test pattern supplied . When this
object is set to sendNoCode(1), the active diagnostic test is
terminated.
When read, value sendNoCode(1) indicates there are no active diagnostic
tests currently running on the channel. The value sendQRSpattern(2)
indicates that a QRS test is running on the channel. The value
send511Pattern(3) indicates that a 511 test is running on the channel.
The value send3in24Pattern(4) indicates that a 3:24 test is running
on the channel. The value send2047Pattern(5) indicates that a 2047
test is running on the channel.
The value sendProgPattern(6) indicates that a user programmable
pattern test is running on the channel. The value sendProgPattern(6)
and the object gdcDsuChannelProgPattern work together.
GdcDsuChannelProgPattern defines the 16 bit user programmable pattern
for the programmable pattern test.
The values send511PatternWithLL(7), send511PatternWithRDL(8),
send2047PatternWithLL(9), send2047PatternWithRDL(10) indicate that
the given pattern test is running in conjunction with a local loop (LL)
or remote digital loop (RDL). gdcDsuChannelLoopbackConfig is updated
to indicate this as well. When one of these tests are running, and this
variable is set to sendNoCode(1), both the pattern and the loopback
are terminated. However, if gdcDsuChannelLoopbackConfig is set to noLoop(1),
only the loopback portion is terminated.
This object, gdcDsuChannelTestResults, and gdcDsuChannelTestStatus
work together as follows:
When this object is set to initiate an active diagnostic test,
gdcDsuTestResults is initialized to 0 and gdcDsuChannelTestStatus
is initialized to testRunning(1). When the test is terminated,
the value of gdcDsuChannelTestStatus reflects testComplete(3).
gdcDsuChannelTestResults contains the count of bit errors detected
during the test.
Parsed from file GDC-DSU-MGMT-MIB.mib
Module: GDC-DSU-MGMT-MIB
gdcDsuChannelDiagSendCode OBJECT-TYPE SYNTAX INTEGER { sendNoCode(1), sendQRSpattern(2), send511Pattern(3), send3in24Pattern(4), sendProgPattern(5), send2047Pattern(6), send511PatternWithLL(7), send511PatternWithRDL(8), send2047PatternWithLL(9), send2047PatternWithRDL(10) } ACCESS read-write STATUS mandatory DESCRIPTION "Initiates and terminates self test pattern generation and detection (active diagnostic tests) on the DSU channel. When this object is set to other than sendNoCode(1), an active diagnostic test is initiated, using the test pattern supplied . When this object is set to sendNoCode(1), the active diagnostic test is terminated. When read, value sendNoCode(1) indicates there are no active diagnostic tests currently running on the channel. The value sendQRSpattern(2) indicates that a QRS test is running on the channel. The value send511Pattern(3) indicates that a 511 test is running on the channel. The value send3in24Pattern(4) indicates that a 3:24 test is running on the channel. The value send2047Pattern(5) indicates that a 2047 test is running on the channel. The value sendProgPattern(6) indicates that a user programmable pattern test is running on the channel. The value sendProgPattern(6) and the object gdcDsuChannelProgPattern work together. GdcDsuChannelProgPattern defines the 16 bit user programmable pattern for the programmable pattern test. The values send511PatternWithLL(7), send511PatternWithRDL(8), send2047PatternWithLL(9), send2047PatternWithRDL(10) indicate that the given pattern test is running in conjunction with a local loop (LL) or remote digital loop (RDL). gdcDsuChannelLoopbackConfig is updated to indicate this as well. When one of these tests are running, and this variable is set to sendNoCode(1), both the pattern and the loopback are terminated. However, if gdcDsuChannelLoopbackConfig is set to noLoop(1), only the loopback portion is terminated. This object, gdcDsuChannelTestResults, and gdcDsuChannelTestStatus work together as follows: When this object is set to initiate an active diagnostic test, gdcDsuTestResults is initialized to 0 and gdcDsuChannelTestStatus is initialized to testRunning(1). When the test is terminated, the value of gdcDsuChannelTestStatus reflects testComplete(3). gdcDsuChannelTestResults contains the count of bit errors detected during the test. " ::= { gdcDsuChannelDiagEntry 2 }
Vendor: General DataComm, Inc.
Module: GDC-DSU-MGMT-MIB
[Automatically extracted from oidview.com]
gdcDsuChannelDiagSendCode OBJECT-TYPE SYNTAX INTEGER { sendNoCode(1), sendQRSpattern(2), send511Pattern(3), send3in24Pattern(4), sendProgPattern(5), send2047Pattern(6), send511PatternWithLL(7), send511PatternWithRDL(8), send2047PatternWithLL(9), send2047PatternWithRDL(10) } ACCESS read-write STATUS mandatory DESCRIPTION "Initiates and terminates self test pattern generation and detection (active diagnostic tests) on the DSU channel. When this object is set to other than sendNoCode(1), an active diagnostic test is initiated, using the test pattern supplied . When this object is set to sendNoCode(1), the active diagnostic test is terminated. When read, value sendNoCode(1) indicates there are no active diagnostic tests currently running on the channel. The value sendQRSpattern(2) indicates that a QRS test is running on the channel. The value send511Pattern(3) indicates that a 511 test is running on the channel. The value send3in24Pattern(4) indicates that a 3:24 test is running on the channel. The value send2047Pattern(5) indicates that a 2047 test is running on the channel. The value sendProgPattern(6) indicates that a user programmable pattern test is running on the channel. The value sendProgPattern(6) and the object gdcDsuChannelProgPattern work together. GdcDsuChannelProgPattern defines the 16 bit user programmable pattern for the programmable pattern test. The values send511PatternWithLL(7), send511PatternWithRDL(8), send2047PatternWithLL(9), send2047PatternWithRDL(10) indicate that the given pattern test is running in conjunction with a local loop (LL) or remote digital loop (RDL). gdcDsuChannelLoopbackConfig is updated to indicate this as well. When one of these tests are running, and this variable is set to sendNoCode(1), both the pattern and the loopback are terminated. However, if gdcDsuChannelLoopbackConfig is set to noLoop(1), only the loopback portion is terminated. This object, gdcDsuChannelTestResults, and gdcDsuChannelTestStatus work together as follows: When this object is set to initiate an active diagnostic test, gdcDsuTestResults is initialized to 0 and gdcDsuChannelTestStatus is initialized to testRunning(1). When the test is terminated, the value of gdcDsuChannelTestStatus reflects testComplete(3). gdcDsuChannelTestResults contains the count of bit errors detected during the test. " ::= { gdcDsuChannelDiagEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.8.5.4.1.1 | gdcDsuChannelDiagIndex | 0 | 0 | The index value which uniquely identifies the channel to which this entry is applicable. This has the form of a SC instance whic… |
| 1.3.6.1.4.1.498.8.5.4.1.3 | gdcDsuChannelDiagProgPattern | 0 | 0 | The 16 bit user programmable test pattern. This object works with gdcDsuChannelSendCode. When gdcDsuChannelSendCodeis set to sen… |
| 1.3.6.1.4.1.498.8.5.4.1.4 | gdcDsuChannelLoopbackConfig | 0 | 0 | The loopback configuration for the DSU channel to be used for both active and passive diagnostic tests. |
| 1.3.6.1.4.1.498.8.5.4.1.5 | gdcDsuChannelTestDuration | 0 | 0 | The length of the diagnostic test, in time. The value 0 signifies that the test should run indefinitely until explicitly terminat… |
| 1.3.6.1.4.1.498.8.5.4.1.6 | gdcDsuChannelDiagTimingSource | 0 | 0 | The timing source to be used for diagnostic tests. For tests that do not disrupt the transmit timing source as defined in gdcDsx1… |
| 1.3.6.1.4.1.498.8.5.4.1.7 | gdcDsuChannelTestStatus | 0 | 0 | The current execution status of the diagnostic test. The value testRunning(1) indicates that a diagnostic test is running. The va… |
| 1.3.6.1.4.1.498.8.5.4.1.8 | gdcDsuChannelTestExceptions | 0 | 0 | Indicates any exceptions that may have occurred that would affect the interpretation of the test results provided in gdcDsuChanne… |
| 1.3.6.1.4.1.498.8.5.4.1.9 | gdcDsuChannelTestResults | 0 | 0 | The results of the last diagnostic test, in bit errors. This can be the current test running or the last completed test. Note tha… |