To initiate a Dataloop test with no Selftest SET this object
and specifiy external, this will allow the data from the DTE attached
to the far end unit (sc5520) to looped back to itself. Emun external(3)
is write only. The only valid response to a READ is dataloopOn(2) or
dataloopOff(1). To halt this test you must SET the nms510DiagTestReset
object. Reading test results via the nms510DiagBitErrors or
nms510DiagBlockErrors objects while the test is running will also cause
the test to terminate. There are no test results associated with this test.
Reading test status on the remote unit via nms510DiagTestStatus may
interfere with the diagonostic test pattern generated from the terminal
equiptment.
Parsed from file nms510.mib.txt
Company: None
Module: NMS510-MIB
To initiate a Dataloop test with no Selftest SET this object
and specifiy external, this will allow the data from the DTE attached
to the far end unit (sc5520) to looped back to itself. Emun external(3)
is write only. The only valid response to a READ is dataloopOn(2) or
dataloopOff(1). To halt this test you must SET the nms510DiagTestReset
object. Reading test results via the nms510DiagBitErrors or
nms510DiagBlockErrors objects while the test is running will also cause
the test to terminate. There are no test results associated with this test.
Reading test status on the remote unit via nms510DiagTestStatus may
interfere with the diagonostic test pattern generated from the terminal
equiptment.
Parsed from file NMS510-MIB.mib
Module: NMS510-MIB
nms510DiagExtDataloop OBJECT-TYPE SYNTAX INTEGER { dataloopOff(1), dataloopOn(2), external(3) } ACCESS read-write STATUS mandatory DESCRIPTION "To initiate a Dataloop test with no Selftest SET this object and specifiy external, this will allow the data from the DTE attached to the far end unit (sc5520) to looped back to itself. Emun external(3) is write only. The only valid response to a READ is dataloopOn(2) or dataloopOff(1). To halt this test you must SET the nms510DiagTestReset object. Reading test results via the nms510DiagBitErrors or nms510DiagBlockErrors objects while the test is running will also cause the test to terminate. There are no test results associated with this test. Reading test status on the remote unit via nms510DiagTestStatus may interfere with the diagonostic test pattern generated from the terminal equiptment. " ::= { nms510DiagExcEntry 7 }
Vendor: General DataComm, Inc.
Module: NMS510-MIB
[Automatically extracted from oidview.com]
nms510DiagExtDataloop OBJECT-TYPE SYNTAX INTEGER { dataloopOff(1), dataloopOn(2), external(3) } ACCESS read-write STATUS mandatory DESCRIPTION "To initiate a Dataloop test with no Selftest SET this object and specifiy external, this will allow the data from the DTE attached to the far end unit (sc5520) to looped back to itself. Emun external(3) is write only. The only valid response to a READ is dataloopOn(2) or dataloopOff(1). To halt this test you must SET the nms510DiagTestReset object. Reading test results via the nms510DiagBitErrors or nms510DiagBlockErrors objects while the test is running will also cause the test to terminate. There are no test results associated with this test. Reading test status on the remote unit via nms510DiagTestStatus may interfere with the diagonostic test pattern generated from the terminal equiptment. " ::= { nms510DiagExcEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.8.6.7.1.1 | nms510DiagExcIndex | 0 | 0 | The index value which uniquely identifies the NMS510 to which this entry is applicable. This has the form of a SCinstance which … |
| 1.3.6.1.4.1.498.8.6.7.1.2 | nms510DiagIntLineloop | 0 | 0 | Lineloop (or Analoop) can be either a Bilaterial or Unilaterial loopback depending on option ddsDteTermaloop. To initiate a Line… |
| 1.3.6.1.4.1.498.8.6.7.1.3 | nms510DiagIntDataloop | 0 | 0 | To initiate a Dataloop with Selftest SET this object and specifiy a blocksize. The nms510 (the remote) unit will go into Dataloo… |
| 1.3.6.1.4.1.498.8.6.7.1.4 | nms510DiagEndToEndSelftest | 0 | 0 | To initiate an End to End Selftest(Error Rate Test) SET this object and specifiy a blocksize. Both the remote (nms510) amd maste… |
| 1.3.6.1.4.1.498.8.6.7.1.5 | nms510DiagNetworkDelay | 0 | 0 | To initiate a Network Delay test SET this object and specifiy runDelayTest. Both the remote (nms510) and master (sc5520) units w… |
| 1.3.6.1.4.1.498.8.6.7.1.6 | nms510DiagTestStatus | 0 | 0 | This object gives the current diagonostic test status. noTest indicates that no diagonostic test is currently active. Reading thi… |