When set to `no' (its default value), SNMP CSM modem card diag is disabled. A JEDEC card is required to turn on this feature.
Parsed from file ASCEND-MIBSNMP-MIB.mib
Module: ASCEND-MIBSNMP-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBSNMP-MIB
[Automatically extracted from oidview.com]
snmpProfile-CsmModemDiag OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to `no' (its default value), SNMP CSM modem card diag is disabled. A JEDEC card is required to turn on this feature. " ::= { mibsnmpProfileEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.23.114.1.1.1 | snmpProfile-Index-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.114.1.1.2 | snmpProfile-Enabled | 0 | 0 | When set to `no' (its default value), the unit cannot be accessed via SNMP. |
1.3.6.1.4.1.529.23.114.1.1.3 | snmpProfile-ReadCommunity | 0 | 0 | The SNMP community name for read access. |
1.3.6.1.4.1.529.23.114.1.1.4 | snmpProfile-ReadWriteEnabled | 0 | 0 | When set to `no' (its default value), the write community cannot be accessed via SNMP. |
1.3.6.1.4.1.529.23.114.1.1.5 | snmpProfile-ReadWriteCommunity | 0 | 0 | The SNMP community name for read/write access. |
1.3.6.1.4.1.529.23.114.1.1.6 | snmpProfile-EnforceAddressSecurity | 0 | 0 | When set to `no' (its default value), we will allow access to all SNMP managers that know the community string. When set to `ye… |
1.3.6.1.4.1.529.23.114.1.1.7 | snmpProfile-Contact | 0 | 0 | The name of the contact for this device. SNMP readable and settable. |
1.3.6.1.4.1.529.23.114.1.1.8 | snmpProfile-Location | 0 | 0 | The location of this device. SNMP readable and settable. |
1.3.6.1.4.1.529.23.114.1.1.9 | snmpProfile-QueueDepth | 0 | 0 | The maximum number of SNMP packets waiting to be serviced. Additional packets will be dropped. When setting this value, you're … |
1.3.6.1.4.1.529.23.114.1.1.11 | snmpProfile-SnmpMessageType | 0 | 0 | Indicate the message type that the SNMP agent should handle. |
1.3.6.1.4.1.529.23.114.1.1.12 | snmpProfile-SecurityLevel | 0 | 0 | Indicate the security level of the SNMP agent. Applicable only if SNMPv3 message handling enabled |
1.3.6.1.4.1.529.23.114.1.1.13 | snmpProfile-EnableVacm | 0 | 0 | If set to TRUE, View Based Access Control Model (VACM) would be enabled, otherwise VACM is disabled. |
1.3.6.1.4.1.529.23.114.1.1.14 | snmpProfile-Action-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.114.1.1.15 | snmpProfile-NotificationLogAgeOut | 0 | 0 | The number of minutes a Notification SHOULD be kept in a log before it is automatically removed. A value of 0 means no age out. |
1.3.6.1.4.1.529.23.114.1.1.16 | snmpProfile-EarlyQueueDiscard | 0 | 0 | If this parameter is set to yes, the system will filter and discard the requests from unauthorized host before queuing to the S… |
1.3.6.1.4.1.529.23.114.1.1.17 | snmpProfile-BitStringsAllowed | 0 | 0 | If enabled, TAOS agent responds to BITS data type in bit string format. If disabled, TAOS agent responds in numeric format. |
1.3.6.1.4.1.529.23.114.1.1.18 | snmpProfile-AlarmClearTableLimit | 0 | 0 | The maximum number of alarmCleared entries that can be held in the alarmCleared table. |