If this parameter is set to yes, the system will filter and discard the requests from unauthorized host before queuing to the SNMP UDP port 161. If this parameter is set to no, the system will queue all incoming SNMP requests to SNMP layer which will discard the requests later if they are from unauthorized host.
Parsed from file ASCEND-MIBSNMP-MIB.mib
Module: ASCEND-MIBSNMP-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBSNMP-MIB
[Automatically extracted from oidview.com]
snmpProfile-EarlyQueueDiscard OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this parameter is set to yes, the system will filter and discard the requests from unauthorized host before queuing to the SNMP UDP port 161. If this parameter is set to no, the system will queue all incoming SNMP requests to SNMP layer which will discard the requests later if they are from unauthorized host." ::= { mibsnmpProfileEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.114.1.1.1 | snmpProfile-Index-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.114.1.1.2 | snmpProfile-Enabled | 0 | 0 | When set to `no' (its default value), the unit cannot be accessed via SNMP. |
| 1.3.6.1.4.1.529.23.114.1.1.3 | snmpProfile-ReadCommunity | 0 | 0 | The SNMP community name for read access. |
| 1.3.6.1.4.1.529.23.114.1.1.4 | snmpProfile-ReadWriteEnabled | 0 | 0 | When set to `no' (its default value), the write community cannot be accessed via SNMP. |
| 1.3.6.1.4.1.529.23.114.1.1.5 | snmpProfile-ReadWriteCommunity | 0 | 0 | The SNMP community name for read/write access. |
| 1.3.6.1.4.1.529.23.114.1.1.6 | snmpProfile-EnforceAddressSecurity | 0 | 0 | When set to `no' (its default value), we will allow access to all SNMP managers that know the community string. When set to `ye… |
| 1.3.6.1.4.1.529.23.114.1.1.7 | snmpProfile-Contact | 0 | 0 | The name of the contact for this device. SNMP readable and settable. |
| 1.3.6.1.4.1.529.23.114.1.1.8 | snmpProfile-Location | 0 | 0 | The location of this device. SNMP readable and settable. |
| 1.3.6.1.4.1.529.23.114.1.1.9 | snmpProfile-QueueDepth | 0 | 0 | The maximum number of SNMP packets waiting to be serviced. Additional packets will be dropped. When setting this value, you're … |
| 1.3.6.1.4.1.529.23.114.1.1.10 | snmpProfile-CsmModemDiag | 0 | 0 | When set to `no' (its default value), SNMP CSM modem card diag is disabled. A JEDEC card is required to turn on this feature. |
| 1.3.6.1.4.1.529.23.114.1.1.11 | snmpProfile-SnmpMessageType | 0 | 0 | Indicate the message type that the SNMP agent should handle. |
| 1.3.6.1.4.1.529.23.114.1.1.12 | snmpProfile-SecurityLevel | 0 | 0 | Indicate the security level of the SNMP agent. Applicable only if SNMPv3 message handling enabled |
| 1.3.6.1.4.1.529.23.114.1.1.13 | snmpProfile-EnableVacm | 0 | 0 | If set to TRUE, View Based Access Control Model (VACM) would be enabled, otherwise VACM is disabled. |
| 1.3.6.1.4.1.529.23.114.1.1.14 | snmpProfile-Action-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.114.1.1.15 | snmpProfile-NotificationLogAgeOut | 0 | 0 | The number of minutes a Notification SHOULD be kept in a log before it is automatically removed. A value of 0 means no age out. |
| 1.3.6.1.4.1.529.23.114.1.1.17 | snmpProfile-BitStringsAllowed | 0 | 0 | If enabled, TAOS agent responds to BITS data type in bit string format. If disabled, TAOS agent responds in numeric format. |
| 1.3.6.1.4.1.529.23.114.1.1.18 | snmpProfile-AlarmClearTableLimit | 0 | 0 | The maximum number of alarmCleared entries that can be held in the alarmCleared table. |