The maximum number of SNMP packets waiting to be serviced. Additional packets will be dropped. When setting this value, you're trading memory resources versus SNMP retries (only when the box is busy and gets behind on servicing the SNMP packets). Zero indicates there is no limit.
Parsed from file ASCEND-MIBSNMP-MIB.mib
Module: ASCEND-MIBSNMP-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBSNMP-MIB
[Automatically extracted from oidview.com]
snmpProfile-QueueDepth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of SNMP packets waiting to be serviced. Additional packets will be dropped. When setting this value, you're trading memory resources versus SNMP retries (only when the box is busy and gets behind on servicing the SNMP packets). Zero indicates there is no limit. " ::= { mibsnmpProfileEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.23.114.1.1.1 | snmpProfile-Index-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.114.1.1.2 | snmpProfile-Enabled | 0 | 0 | When set to `no' (its default value), the unit cannot be accessed via SNMP. |
1.3.6.1.4.1.529.23.114.1.1.3 | snmpProfile-ReadCommunity | 0 | 0 | The SNMP community name for read access. |
1.3.6.1.4.1.529.23.114.1.1.4 | snmpProfile-ReadWriteEnabled | 0 | 0 | When set to `no' (its default value), the write community cannot be accessed via SNMP. |
1.3.6.1.4.1.529.23.114.1.1.5 | snmpProfile-ReadWriteCommunity | 0 | 0 | The SNMP community name for read/write access. |
1.3.6.1.4.1.529.23.114.1.1.6 | snmpProfile-EnforceAddressSecurity | 0 | 0 | When set to `no' (its default value), we will allow access to all SNMP managers that know the community string. When set to `ye… |
1.3.6.1.4.1.529.23.114.1.1.7 | snmpProfile-Contact | 0 | 0 | The name of the contact for this device. SNMP readable and settable. |
1.3.6.1.4.1.529.23.114.1.1.8 | snmpProfile-Location | 0 | 0 | The location of this device. SNMP readable and settable. |
1.3.6.1.4.1.529.23.114.1.1.10 | snmpProfile-CsmModemDiag | 0 | 0 | When set to `no' (its default value), SNMP CSM modem card diag is disabled. A JEDEC card is required to turn on this feature. |
1.3.6.1.4.1.529.23.114.1.1.11 | snmpProfile-SnmpMessageType | 0 | 0 | Indicate the message type that the SNMP agent should handle. |
1.3.6.1.4.1.529.23.114.1.1.12 | snmpProfile-SecurityLevel | 0 | 0 | Indicate the security level of the SNMP agent. Applicable only if SNMPv3 message handling enabled |
1.3.6.1.4.1.529.23.114.1.1.13 | snmpProfile-EnableVacm | 0 | 0 | If set to TRUE, View Based Access Control Model (VACM) would be enabled, otherwise VACM is disabled. |
1.3.6.1.4.1.529.23.114.1.1.14 | snmpProfile-Action-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.114.1.1.15 | snmpProfile-NotificationLogAgeOut | 0 | 0 | The number of minutes a Notification SHOULD be kept in a log before it is automatically removed. A value of 0 means no age out. |
1.3.6.1.4.1.529.23.114.1.1.16 | snmpProfile-EarlyQueueDiscard | 0 | 0 | If this parameter is set to yes, the system will filter and discard the requests from unauthorized host before queuing to the S… |
1.3.6.1.4.1.529.23.114.1.1.17 | snmpProfile-BitStringsAllowed | 0 | 0 | If enabled, TAOS agent responds to BITS data type in bit string format. If disabled, TAOS agent responds in numeric format. |
1.3.6.1.4.1.529.23.114.1.1.18 | snmpProfile-AlarmClearTableLimit | 0 | 0 | The maximum number of alarmCleared entries that can be held in the alarmCleared table. |