This attribute defines the maximum cell arrival jitter (in
milliseconds) that the AAL1 reassembly process will
tolerate in the ATM cell stream without producing errors
on the service interface.
This attribute may be set to a small value if the CES
connection will produce minimal CDV and a large value if
the connection will produce a large CDV.
This attribute, together with the attribute bufferSize, can be
configured to optimize the jitter versus absolute delay
trade-off in various network configurations.
Parsed from file nortelPP-circuitEmulationServiceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
This attribute defines the maximum cell arrival jitter (in
milliseconds) that the AAL1 reassembly process will
tolerate in the ATM cell stream without producing errors
on the service interface.
This attribute may be set to a small value if the CES
connection will produce minimal CDV and a large value if
the connection will produce a large CDV.
This attribute, together with the attribute bufferSize, can be
configured to optimize the jitter versus absolute delay
trade-off in various network configurations.
Parsed from file Nortel-Magellan-Passport-CircuitEmulationServiceMIB.mib
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
[Automatically extracted from oidview.com]
aal1CesCellDelayVariationTolerance OBJECT-TYPE SYNTAX Unsigned32 (1..655) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the maximum cell arrival jitter (in milliseconds) that the AAL1 reassembly process will tolerate in the ATM cell stream without producing errors on the service interface. This attribute may be set to a small value if the CES connection will produce minimal CDV and a large value if the connection will produce a large CDV. This attribute, together with the attribute bufferSize, can be configured to optimize the jitter versus absolute delay trade-off in various network configurations." DEFVAL { 1 } ::= { aal1CesProvEntry 3 }
aal1CesCellDelayVariationTolerance OBJECT-TYPE SYNTAX Unsigned32 (1..655) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the maximum cell arrival jitter (in milliseconds) that the AAL1 reassembly process will tolerate in the ATM cell stream without producing errors on the service interface. This attribute may be set to a small value if the CES connection will produce minimal CDV and a large value if the connection will produce a large CDV. This attribute, together with the attribute bufferSize, can be configured to optimize the jitter versus absolute delay trade-off in various network configurations." DEFVAL { 1 } ::= { aal1CesProvEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.119.11.1.1 | aal1CesServiceType | 0 | 0 | This attribute specifies the service type for the CES. In an unstructured service, the entire data stream at the service interfa… |
1.3.6.1.4.1.562.2.4.1.119.11.1.2 | aal1CesBufferSize | 0 | 0 | This attribute defines the size of the AAL1 receive segment reassembly buffer in bytes. The value of this attribute will affect t… |
1.3.6.1.4.1.562.2.4.1.119.11.1.4 | aal1CesCellLossIntegrationPeriod | 0 | 0 | This attribute defines the cell loss integration period. This period defines the interval of time (in milliseconds) for which a l… |
1.3.6.1.4.1.562.2.4.1.119.11.1.5 | aal1CesInterfaceName | 0 | 0 | This attribute identifies the instance of Chan to which an instance of Aal1Ces is linked. |
1.3.6.1.4.1.562.2.4.1.119.11.1.6 | aal1CesPartialFill | 0 | 0 | A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This … |
1.3.6.1.4.1.562.2.4.1.119.11.1.7 | aal1CesIdleSuppression | 0 | 0 | This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the parti… |
1.3.6.1.4.1.562.2.4.1.119.11.1.8 | aal1CesIdlePattern | 0 | 0 | This attribute specifies the pattern which the bytes of an ATM payload, up to the partialFill level, must match in order for the … |
1.3.6.1.4.1.562.2.4.1.119.11.1.9 | aal1CesCellLossRecoveryPeriod | 0 | 0 | This attribute defines the cell loss recovery period. This period defines the interval of time (in seconds) for which a loss of c… |
1.3.6.1.4.1.562.2.4.1.119.11.1.10 | aal1CesDummyDataByte | 0 | 0 | This attribute defines the pattern which is played out onto the service interface to maintain bit integrity when data is unavaila… |