This attribute controls the suppression of idle cells. An idle
cell is one in which the bytes of the ATM payload (up to
the partialFill level) match the idlePattern.
If idleSuppression is off, idle cells are not suppressed.
If idleSuppression is on, at least 75% of cells are
suppressed under idle conditions.
The strategy is as follows: the first idle cell after a
sequence of non-idle cells is always sent; those that follow
are suppressed. Note, however, that at least one cell in
eight is always sent (to allow the receive end to regenerate
the suppressed cells) and more often than not, two cells are
sent (the cell containing the AAL1 pointer, which will
almost always fail to match, and the one after that).
Parsed from file nortelPP-circuitEmulationServiceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
This attribute controls the suppression of idle cells. An idle
cell is one in which the bytes of the ATM payload (up to
the partialFill level) match the idlePattern.
If idleSuppression is off, idle cells are not suppressed.
If idleSuppression is on, at least 75% of cells are
suppressed under idle conditions.
The strategy is as follows: the first idle cell after a
sequence of non-idle cells is always sent; those that follow
are suppressed. Note, however, that at least one cell in
eight is always sent (to allow the receive end to regenerate
the suppressed cells) and more often than not, two cells are
sent (the cell containing the AAL1 pointer, which will
almost always fail to match, and the one after that).
Parsed from file Nortel-Magellan-Passport-CircuitEmulationServiceMIB.mib
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
[Automatically extracted from oidview.com]
aal1CesIdleSuppression OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the partialFill level) match the idlePattern. If idleSuppression is off, idle cells are not suppressed. If idleSuppression is on, at least 75% of cells are suppressed under idle conditions. The strategy is as follows: the first idle cell after a sequence of non-idle cells is always sent; those that follow are suppressed. Note, however, that at least one cell in eight is always sent (to allow the receive end to regenerate the suppressed cells) and more often than not, two cells are sent (the cell containing the AAL1 pointer, which will almost always fail to match, and the one after that)." DEFVAL { off } ::= { aal1CesProvEntry 7 }
aal1CesIdleSuppression OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the partialFill level) match the idlePattern. If idleSuppression is off, idle cells are not suppressed. If idleSuppression is on, at least 75% of cells are suppressed under idle conditions. The strategy is as follows: the first idle cell after a sequence of non-idle cells is always sent; those that follow are suppressed. Note, however, that at least one cell in eight is always sent (to allow the receive end to regenerate the suppressed cells) and more often than not, two cells are sent (the cell containing the AAL1 pointer, which will almost always fail to match, and the one after that)." DEFVAL { off } ::= { aal1CesProvEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.119.11.1.1 | aal1CesServiceType | 0 | 0 | This attribute specifies the service type for the CES. In an unstructured service, the entire data stream at the service interfa… |
1.3.6.1.4.1.562.2.4.1.119.11.1.2 | aal1CesBufferSize | 0 | 0 | This attribute defines the size of the AAL1 receive segment reassembly buffer in bytes. The value of this attribute will affect t… |
1.3.6.1.4.1.562.2.4.1.119.11.1.3 | aal1CesCellDelayVariationTolerance | 0 | 0 | This attribute defines the maximum cell arrival jitter (in milliseconds) that the AAL1 reassembly process will tolerate in the AT… |
1.3.6.1.4.1.562.2.4.1.119.11.1.4 | aal1CesCellLossIntegrationPeriod | 0 | 0 | This attribute defines the cell loss integration period. This period defines the interval of time (in milliseconds) for which a l… |
1.3.6.1.4.1.562.2.4.1.119.11.1.5 | aal1CesInterfaceName | 0 | 0 | This attribute identifies the instance of Chan to which an instance of Aal1Ces is linked. |
1.3.6.1.4.1.562.2.4.1.119.11.1.6 | aal1CesPartialFill | 0 | 0 | A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This … |
1.3.6.1.4.1.562.2.4.1.119.11.1.8 | aal1CesIdlePattern | 0 | 0 | This attribute specifies the pattern which the bytes of an ATM payload, up to the partialFill level, must match in order for the … |
1.3.6.1.4.1.562.2.4.1.119.11.1.9 | aal1CesCellLossRecoveryPeriod | 0 | 0 | This attribute defines the cell loss recovery period. This period defines the interval of time (in seconds) for which a loss of c… |
1.3.6.1.4.1.562.2.4.1.119.11.1.10 | aal1CesDummyDataByte | 0 | 0 | This attribute defines the pattern which is played out onto the service interface to maintain bit integrity when data is unavaila… |