A significant source of delay in a structured service is the
amount of time it takes to collect enough data to fill a cell.
This period of time can be reduced by sending cells that
are only partially filled with data (idlePattern octets are
added to the ATM payload beyond the partial fill level).
This attribute defines the number of payload octets to fill
with data. It is applicable to structured services only, and
must be set to 47 for unstructured services.
On a given AAL1 Function Processor, the maximum cell
rate that can be sustained is dependent upon the combined
bandwidths of the provisioned services, and (for structured
services) the levels of partialFill. The smaller the
partialFill level, the greater the cell rate and hence the
fewer the services that can be sustained at that fill level.
Parsed from file nortelPP-circuitEmulationServiceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
A significant source of delay in a structured service is the
amount of time it takes to collect enough data to fill a cell.
This period of time can be reduced by sending cells that
are only partially filled with data (idlePattern octets are
added to the ATM payload beyond the partial fill level).
This attribute defines the number of payload octets to fill
with data. It is applicable to structured services only, and
must be set to 47 for unstructured services.
On a given AAL1 Function Processor, the maximum cell
rate that can be sustained is dependent upon the combined
bandwidths of the provisioned services, and (for structured
services) the levels of partialFill. The smaller the
partialFill level, the greater the cell rate and hence the
fewer the services that can be sustained at that fill level.
Parsed from file Nortel-Magellan-Passport-CircuitEmulationServiceMIB.mib
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
[Automatically extracted from oidview.com]
aal1CesPartialFill OBJECT-TYPE SYNTAX Unsigned32 (8..47) ACCESS read-write STATUS mandatory DESCRIPTION "A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This period of time can be reduced by sending cells that are only partially filled with data (idlePattern octets are added to the ATM payload beyond the partial fill level). This attribute defines the number of payload octets to fill with data. It is applicable to structured services only, and must be set to 47 for unstructured services. On a given AAL1 Function Processor, the maximum cell rate that can be sustained is dependent upon the combined bandwidths of the provisioned services, and (for structured services) the levels of partialFill. The smaller the partialFill level, the greater the cell rate and hence the fewer the services that can be sustained at that fill level." DEFVAL { 47 } ::= { aal1CesProvEntry 6 }
aal1CesPartialFill OBJECT-TYPE SYNTAX Unsigned32 (8..47) ACCESS read-write STATUS mandatory DESCRIPTION "A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This period of time can be reduced by sending cells that are only partially filled with data (idlePattern octets are added to the ATM payload beyond the partial fill level). This attribute defines the number of payload octets to fill with data. It is applicable to structured services only, and must be set to 47 for unstructured services. On a given AAL1 Function Processor, the maximum cell rate that can be sustained is dependent upon the combined bandwidths of the provisioned services, and (for structured services) the levels of partialFill. The smaller the partialFill level, the greater the cell rate and hence the fewer the services that can be sustained at that fill level." DEFVAL { 47 } ::= { aal1CesProvEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.119.11.1.1 | aal1CesServiceType | 0 | 0 | This attribute specifies the service type for the CES. In an unstructured service, the entire data stream at the service interfa… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.2 | aal1CesBufferSize | 0 | 0 | This attribute defines the size of the AAL1 receive segment reassembly buffer in bytes. The value of this attribute will affect t… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.3 | aal1CesCellDelayVariationTolerance | 0 | 0 | This attribute defines the maximum cell arrival jitter (in milliseconds) that the AAL1 reassembly process will tolerate in the AT… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.4 | aal1CesCellLossIntegrationPeriod | 0 | 0 | This attribute defines the cell loss integration period. This period defines the interval of time (in milliseconds) for which a l… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.5 | aal1CesInterfaceName | 0 | 0 | This attribute identifies the instance of Chan to which an instance of Aal1Ces is linked. |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.7 | aal1CesIdleSuppression | 0 | 0 | This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the parti… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.8 | aal1CesIdlePattern | 0 | 0 | This attribute specifies the pattern which the bytes of an ATM payload, up to the partialFill level, must match in order for the … |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.9 | aal1CesCellLossRecoveryPeriod | 0 | 0 | This attribute defines the cell loss recovery period. This period defines the interval of time (in seconds) for which a loss of c… |
| 1.3.6.1.4.1.562.2.4.1.119.11.1.10 | aal1CesDummyDataByte | 0 | 0 | This attribute defines the pattern which is played out onto the service interface to maintain bit integrity when data is unavaila… |