This attribute indicates the urgency with which packets on the path
are emitted by the trunks on the route. The originating end of the
connection selects the emissionPriority. EmissionPriority of zero
indicates the highest emission priority, while two indicates the
lowest emission priority. Packets with a higher emissionPriority (or
numerically less) are serviced and sent out before the packets of
lower emissionPriority (or numerically higher).
Parsed from file nortelPP-circuitEmulationServiceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
This attribute indicates the urgency with which packets on the path
are emitted by the trunks on the route. The originating end of the
connection selects the emissionPriority. EmissionPriority of zero
indicates the highest emission priority, while two indicates the
lowest emission priority. Packets with a higher emissionPriority (or
numerically less) are serviced and sent out before the packets of
lower emissionPriority (or numerically higher).
Parsed from file Nortel-Magellan-Passport-CircuitEmulationServiceMIB.mib
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
[Automatically extracted from oidview.com]
aal1CesLCoEmissionPriority OBJECT-TYPE SYNTAX Unsigned32 (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the emissionPriority. EmissionPriority of zero indicates the highest emission priority, while two indicates the lowest emission priority. Packets with a higher emissionPriority (or numerically less) are serviced and sent out before the packets of lower emissionPriority (or numerically higher)." ::= { aal1CesLCoPathDataEntry 15 }
aal1CesLCoEmissionPriority OBJECT-TYPE SYNTAX Unsigned32 (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the emissionPriority. EmissionPriority of zero indicates the highest emission priority, while two indicates the lowest emission priority. Packets with a higher emissionPriority (or numerically less) are serviced and sent out before the packets of lower emissionPriority (or numerically higher)." ::= { aal1CesLCoPathDataEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.1 | aal1CesLCoState | 0 | 0 | This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end pro… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.2 | aal1CesLCoOverrideRemoteName | 0 | 0 | If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.3 | aal1CesLCoEnd | 0 | 0 | This attribute identifies whether this is the calling or called end of the path. |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.4 | aal1CesLCoCostMetric | 0 | 0 | This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.5 | aal1CesLCoDelayMetric | 0 | 0 | This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.6 | aal1CesLCoRoundTripDelay | 0 | 0 | This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LC… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.7 | aal1CesLCoSetupPriority | 0 | 0 | This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest.… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.8 | aal1CesLCoHoldingPriority | 0 | 0 | This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest prior… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.9 | aal1CesLCoRequiredTxBandwidth | 0 | 0 | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This at… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.10 | aal1CesLCoRequiredRxBandwidth | 0 | 0 | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attrib… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.11 | aal1CesLCoRequiredTrafficType | 0 | 0 | This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.12 | aal1CesLCoPermittedTrunkTypes | 0 | 0 | This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.13 | aal1CesLCoRequiredSecurity | 0 | 0 | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.14 | aal1CesLCoRequiredCustomerParameter | 0 | 0 | This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.16 | aal1CesLCoDiscardPriority | 0 | 0 | This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. O… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.17 | aal1CesLCoPathType | 0 | 0 | aal1CesLCoPathtype |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.18 | aal1CesLCoRetryCount | 0 | 0 | This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.19 | aal1CesLCoPathFailureCount | 0 | 0 | This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the pat… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.20 | aal1CesLCoReasonForNoRoute | 0 | 0 | This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reas… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.21 | aal1CesLCoLastTearDownReason | 0 | 0 | This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.22 | aal1CesLCoPathFailureAction | 0 | 0 | This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.23 | aal1CesLCoBumpPreference | 0 | 0 | This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It w… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.24 | aal1CesLCoOptimization | 0 | 0 | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.25 | aal1CesLCoPathUpDateTime | 0 | 0 | This is the time stamp when the current path was established or reestablished. |