This attribute contains the time taken for a packet (cell) of 44 bytes
to be transmitted to the remote LCo and return to this LCo. The
number reported is given in milliseconds to the nearest millisecond.
A value of one millisecond is reported if the time is less than 1
millisecond even though the delay may be less than 1 Millisecond
when the LCo is originated and terminated on the same module.
Parsed from file nortelPP-circuitEmulationServiceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
This attribute contains the time taken for a packet (cell) of 44 bytes
to be transmitted to the remote LCo and return to this LCo. The
number reported is given in milliseconds to the nearest millisecond.
A value of one millisecond is reported if the time is less than 1
millisecond even though the delay may be less than 1 Millisecond
when the LCo is originated and terminated on the same module.
Parsed from file Nortel-Magellan-Passport-CircuitEmulationServiceMIB.mib
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-CircuitEmulationServiceMIB
[Automatically extracted from oidview.com]
aal1CesLCoRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 (0..200000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given in milliseconds to the nearest millisecond. A value of one millisecond is reported if the time is less than 1 millisecond even though the delay may be less than 1 Millisecond when the LCo is originated and terminated on the same module." ::= { aal1CesLCoPathDataEntry 6 }
aal1CesLCoRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 (0..200000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given in milliseconds to the nearest millisecond. A value of one millisecond is reported if the time is less than 1 millisecond even though the delay may be less than 1 Millisecond when the LCo is originated and terminated on the same module." ::= { aal1CesLCoPathDataEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.1 | aal1CesLCoState | 0 | 0 | This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end pro… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.2 | aal1CesLCoOverrideRemoteName | 0 | 0 | If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.3 | aal1CesLCoEnd | 0 | 0 | This attribute identifies whether this is the calling or called end of the path. |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.4 | aal1CesLCoCostMetric | 0 | 0 | This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.5 | aal1CesLCoDelayMetric | 0 | 0 | This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.7 | aal1CesLCoSetupPriority | 0 | 0 | This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest.… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.8 | aal1CesLCoHoldingPriority | 0 | 0 | This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest prior… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.9 | aal1CesLCoRequiredTxBandwidth | 0 | 0 | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This at… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.10 | aal1CesLCoRequiredRxBandwidth | 0 | 0 | This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attrib… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.11 | aal1CesLCoRequiredTrafficType | 0 | 0 | This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.12 | aal1CesLCoPermittedTrunkTypes | 0 | 0 | This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.13 | aal1CesLCoRequiredSecurity | 0 | 0 | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.14 | aal1CesLCoRequiredCustomerParameter | 0 | 0 | This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.15 | aal1CesLCoEmissionPriority | 0 | 0 | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.16 | aal1CesLCoDiscardPriority | 0 | 0 | This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. O… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.17 | aal1CesLCoPathType | 0 | 0 | aal1CesLCoPathtype |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.18 | aal1CesLCoRetryCount | 0 | 0 | This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count … |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.19 | aal1CesLCoPathFailureCount | 0 | 0 | This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the pat… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.20 | aal1CesLCoReasonForNoRoute | 0 | 0 | This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reas… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.21 | aal1CesLCoLastTearDownReason | 0 | 0 | This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.22 | aal1CesLCoPathFailureAction | 0 | 0 | This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.23 | aal1CesLCoBumpPreference | 0 | 0 | This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It w… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.24 | aal1CesLCoOptimization | 0 | 0 | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS… |
| 1.3.6.1.4.1.562.2.4.1.119.5.10.1.25 | aal1CesLCoPathUpDateTime | 0 | 0 | This is the time stamp when the current path was established or reestablished. |