This attribute displays whether the far-end SEF/AIS defect indicator
is transmitted over the outgoing line when the E3 component has
been unlocked or used in operational testing. When the E3
component is locked and not used in operational testing, this
attribute is always set to off. The far-end SEF/AIS defect indicator is
transmitted over the outgoing line when SEF/AIS defects are
detected on the incoming line. In G.832 E3 Framing mode, the
FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute displays whether the far-end SEF/AIS defect indicator
is transmitted over the outgoing line when the E3 component has
been unlocked or used in operational testing. When the E3
component is locked and not used in operational testing, this
attribute is always set to off. The far-end SEF/AIS defect indicator is
transmitted over the outgoing line when SEF/AIS defects are
detected on the incoming line. In G.832 E3 Framing mode, the
FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpE3TxRai OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator." DEFVAL { off } ::= { lpE3OperEntry 6 }
lpE3TxRai OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator." DEFVAL { off } ::= { lpE3OperEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.1 | lpE3LosAlarm | 0 | 0 | This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defe… |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.2 | lpE3LofAlarm | 0 | 0 | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely E… |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.3 | lpE3RxAisAlarm | 0 | 0 | This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entere… |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.4 | lpE3RxRaiAlarm | 0 | 0 | This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when … |
| 1.3.6.1.4.1.562.2.4.1.12.6.16.1.5 | lpE3TxAis | 0 | 0 | This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when t… |