This attribute specifies the default of whether to force tagging
(CLP=1) of all cells for all UBR connections. An override to this
default may be specified for a provisioned connection under the Vcd
Tm or Vpd Tm component. This attribute is not supported by
4pOC12SmIrAtm and 4pOC12SmLrAtm cards.
When this attribute is set to enabled, CLP is set to 1 for all cells in
the transmit direction. This is in conformance with the ATM Forum
TM4.0 UBR.2 service definition. Force tagging is only supported
on ATM IP FPs.
On CQC-based ATM FPs, this attribute must be set to disabled.
When this attribute is set to disabled, CLP is unchanged for all cells
in the transmit direction. This is in conformance with the ATM
Forum TM4.0 UBR.1 service definition.
This attribute never applies to any type of Vpt.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default of whether to force tagging
(CLP=1) of all cells for all UBR connections. An override to this
default may be specified for a provisioned connection under the Vcd
Tm or Vpd Tm component. This attribute is not supported by
4pOC12SmIrAtm and 4pOC12SmLrAtm cards.
When this attribute is set to enabled, CLP is set to 1 for all cells in
the transmit direction. This is in conformance with the ATM Forum
TM4.0 UBR.2 service definition. Force tagging is only supported
on ATM IP FPs.
On CQC-based ATM FPs, this attribute must be set to disabled.
When this attribute is set to disabled, CLP is unchanged for all cells
in the transmit direction. This is in conformance with the ATM
Forum TM4.0 UBR.1 service definition.
This attribute never applies to any type of Vpt.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAUbrForceTagging OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all UBR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. This attribute is not supported by 4pOC12SmIrAtm and 4pOC12SmLrAtm cards. When this attribute is set to enabled, CLP is set to 1 for all cells in the transmit direction. This is in conformance with the ATM Forum TM4.0 UBR.2 service definition. Force tagging is only supported on ATM IP FPs. On CQC-based ATM FPs, this attribute must be set to disabled. When this attribute is set to disabled, CLP is unchanged for all cells in the transmit direction. This is in conformance with the ATM Forum TM4.0 UBR.1 service definition. This attribute never applies to any type of Vpt." DEFVAL { disabled } ::= { mscAtmIfCAUbrProvEntry 24 }
mscAtmIfCAUbrForceTagging OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all UBR connections. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. This attribute is not supported by 4pOC12SmIrAtm and 4pOC12SmLrAtm cards. When this attribute is set to enabled, CLP is set to 1 for all cells in the transmit direction. This is in conformance with the ATM Forum TM4.0 UBR.2 service definition. Force tagging is only supported on ATM IP FPs. On CQC-based ATM FPs, this attribute must be set to disabled. When this attribute is set to disabled, CLP is unchanged for all cells in the transmit direction. This is in conformance with the ATM Forum TM4.0 UBR.1 service definition. This attribute never applies to any type of Vpt." DEFVAL { disabled } ::= { mscAtmIfCAUbrProvEntry 24 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.5 | mscAtmIfCAUbrMaxVpcs | 0 | 0 | This attribute specifies the maximum number of UBR Vpcs that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.6 | mscAtmIfCAUbrMaxVccs | 0 | 0 | This attribute specifies the maximum number of UBR Vccs that can be activated on this AtmIf, including UBR Vpt Vccs. The value m… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.7 | mscAtmIfCAUbrMaxVpts | 0 | 0 | This attribute specifies the maximum number of UBR Vpts that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.10 | mscAtmIfCAUbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the unspecified bit rate (UBR) service category excep… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.11 | mscAtmIfCAUbrMinimumCellRate | 0 | 0 | This attribute specifies the minimum cell rate (MCR) which is allocated from the UBR bandwidth pool for each UBR connection which… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.12 | mscAtmIfCAUbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the UBR service c… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.13 | mscAtmIfCAUbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the UBR service category. The queue lim… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.14 | mscAtmIfCAUbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the UB… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.15 | mscAtmIfCAUbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.19 | mscAtmIfCAUbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the UBR service category. An override to this def… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.20 | mscAtmIfCAUbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the UBR service category. This is the policy which is used to recoup shap… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.21 | mscAtmIfCAUbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the UBR service category. This attribute control… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.22 | mscAtmIfCAUbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the UBR service category. This attr… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.23 | mscAtmIfCAUbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the UBR se… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.30 | mscAtmIfCAUbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the UBR service category. An ov… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.40 | mscAtmIfCAUbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC UBR connections. It takes a value from 0 (hig… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.50 | mscAtmIfCAUbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC UBR point-to-multipoint connections. It takes a value… |