This attribute specifies the default holding priority which applies to
SVP and SVC UBR connections. It takes a value from 0 (highest
priority) to 4 (lowest priority). In a situation where the link
bandwidth fluctuates, such as over an IMA link, holding priority is
used to determine which connections are held and which are
released. Holding priority 4 connections are the first to be released.
Holding priority 0 connections are the last to be released.
This attribute does not apply to Vpt Vccs. When bandwidth
fluctuates, the entire Vpt, along with all Vpt Vccs is released as a
unit, according to the Vpt's holdingPriority.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the default holding priority which applies to
SVP and SVC UBR connections. It takes a value from 0 (highest
priority) to 4 (lowest priority). In a situation where the link
bandwidth fluctuates, such as over an IMA link, holding priority is
used to determine which connections are held and which are
released. Holding priority 4 connections are the first to be released.
Holding priority 0 connections are the last to be released.
This attribute does not apply to Vpt Vccs. When bandwidth
fluctuates, the entire Vpt, along with all Vpt Vccs is released as a
unit, according to the Vpt's holdingPriority.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAUbrHoldingPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default holding priority which applies to SVP and SVC UBR connections. It takes a value from 0 (highest priority) to 4 (lowest priority). In a situation where the link bandwidth fluctuates, such as over an IMA link, holding priority is used to determine which connections are held and which are released. Holding priority 4 connections are the first to be released. Holding priority 0 connections are the last to be released. This attribute does not apply to Vpt Vccs. When bandwidth fluctuates, the entire Vpt, along with all Vpt Vccs is released as a unit, according to the Vpt's holdingPriority." DEFVAL { n3 } ::= { mscAtmIfCAUbrProvEntry 40 }
mscAtmIfCAUbrHoldingPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default holding priority which applies to SVP and SVC UBR connections. It takes a value from 0 (highest priority) to 4 (lowest priority). In a situation where the link bandwidth fluctuates, such as over an IMA link, holding priority is used to determine which connections are held and which are released. Holding priority 4 connections are the first to be released. Holding priority 0 connections are the last to be released. This attribute does not apply to Vpt Vccs. When bandwidth fluctuates, the entire Vpt, along with all Vpt Vccs is released as a unit, according to the Vpt's holdingPriority." DEFVAL { n3 } ::= { mscAtmIfCAUbrProvEntry 40 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.5 | mscAtmIfCAUbrMaxVpcs | 0 | 0 | This attribute specifies the maximum number of UBR Vpcs that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.6 | mscAtmIfCAUbrMaxVccs | 0 | 0 | This attribute specifies the maximum number of UBR Vccs that can be activated on this AtmIf, including UBR Vpt Vccs. The value m… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.7 | mscAtmIfCAUbrMaxVpts | 0 | 0 | This attribute specifies the maximum number of UBR Vpts that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.10 | mscAtmIfCAUbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the unspecified bit rate (UBR) service category excep… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.11 | mscAtmIfCAUbrMinimumCellRate | 0 | 0 | This attribute specifies the minimum cell rate (MCR) which is allocated from the UBR bandwidth pool for each UBR connection which… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.12 | mscAtmIfCAUbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the UBR service c… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.13 | mscAtmIfCAUbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the UBR service category. The queue lim… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.14 | mscAtmIfCAUbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the UB… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.15 | mscAtmIfCAUbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.19 | mscAtmIfCAUbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the UBR service category. An override to this def… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.20 | mscAtmIfCAUbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the UBR service category. This is the policy which is used to recoup shap… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.21 | mscAtmIfCAUbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the UBR service category. This attribute control… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.22 | mscAtmIfCAUbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the UBR service category. This attr… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.23 | mscAtmIfCAUbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the UBR se… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.24 | mscAtmIfCAUbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all UBR connections. An override to th… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.30 | mscAtmIfCAUbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the UBR service category. An ov… |
| 1.3.6.1.4.1.562.36.2.1.114.3.6.100.1.50 | mscAtmIfCAUbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC UBR point-to-multipoint connections. It takes a value… |