This attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)
Parsed from file nortelPC-atmUniV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
This attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)
Parsed from file Nortel-MsCarrier-MscPassport-AtmUniMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
[Automatically extracted from oidview.com]
mscAtmIfUniSigVcdWeight OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4095 | 65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )" DEFVAL { 65535 } ::= { mscAtmIfUniSigVcdProvEntry 4 }
mscAtmIfUniSigVcdWeight OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4095 | 65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )" DEFVAL { 65535 } ::= { mscAtmIfUniSigVcdProvEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.1 | mscAtmIfUniSigVcdTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this conn… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.3 | mscAtmIfUniSigVcdAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.21 | mscAtmIfUniSigVcdQosClass | 0 | 0 | This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 support… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.50 | mscAtmIfUniSigVcdTrafficShaping | 0 | 0 | This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameA… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.60 | mscAtmIfUniSigVcdUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70 | mscAtmIfUniSigVcdUsageParameterControl | 0 | 0 | This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.… |