This attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.
Parsed from file nortelPC-atmUniV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
This attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.
Parsed from file Nortel-MsCarrier-MscPassport-AtmUniMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
[Automatically extracted from oidview.com]
mscAtmIfUniSigVcdTrafficShaping OBJECT-TYPE SYNTAX INTEGER { disabled(1), sameAsCa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled." DEFVAL { disabled } ::= { mscAtmIfUniSigVcdProvEntry 50 }
mscAtmIfUniSigVcdTrafficShaping OBJECT-TYPE SYNTAX INTEGER { disabled(1), sameAsCa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled." DEFVAL { disabled } ::= { mscAtmIfUniSigVcdProvEntry 50 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.1 | mscAtmIfUniSigVcdTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this conn… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.3 | mscAtmIfUniSigVcdAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.4 | mscAtmIfUniSigVcdWeight | 0 | 0 | This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connection… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.21 | mscAtmIfUniSigVcdQosClass | 0 | 0 | This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 support… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.60 | mscAtmIfUniSigVcdUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70 | mscAtmIfUniSigVcdUsageParameterControl | 0 | 0 | This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.… |