This attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be used
Parsed from file nortelPC-atmUniV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
This attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be used
Parsed from file Nortel-MsCarrier-MscPassport-AtmUniMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
[Automatically extracted from oidview.com]
mscAtmIfUniSigVcdUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), sameAsCa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used" DEFVAL { disabled } ::= { mscAtmIfUniSigVcdProvEntry 70 }
mscAtmIfUniSigVcdUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), sameAsCa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used" DEFVAL { disabled } ::= { mscAtmIfUniSigVcdProvEntry 70 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.1 | mscAtmIfUniSigVcdTrafficDescType | 0 | 0 | This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this conn… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.3 | mscAtmIfUniSigVcdAtmServiceCategory | 0 | 0 | This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.4 | mscAtmIfUniSigVcdWeight | 0 | 0 | This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connection… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.21 | mscAtmIfUniSigVcdQosClass | 0 | 0 | This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 support… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.50 | mscAtmIfUniSigVcdTrafficShaping | 0 | 0 | This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameA… |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.60 | mscAtmIfUniSigVcdUnshapedTransmitQueueing | 0 | 0 | This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this con… |