This attribute specifies the pattern which is played out onto the
service interface to maintain bit integrity when data is unavailable
from the ATM network.
For an unstructured service (serviceType is set to unstructured),
dummyDataByte must be set to FF.
Parsed from file nortelPC-circuitEmulationServiceV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
This attribute specifies the pattern which is played out onto the
service interface to maintain bit integrity when data is unavailable
from the ATM network.
For an unstructured service (serviceType is set to unstructured),
dummyDataByte must be set to FF.
Parsed from file Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB.mib
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
[Automatically extracted from oidview.com]
mscAal1CesDummyDataByte OBJECT-TYPE SYNTAX Hex (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the pattern which is played out onto the service interface to maintain bit integrity when data is unavailable from the ATM network. For an unstructured service (serviceType is set to unstructured), dummyDataByte must be set to FF." DEFVAL { 255 } ::= { mscAal1CesProvEntry 10 }
mscAal1CesDummyDataByte OBJECT-TYPE SYNTAX Hex (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the pattern which is played out onto the service interface to maintain bit integrity when data is unavailable from the ATM network. For an unstructured service (serviceType is set to unstructured), dummyDataByte must be set to FF." DEFVAL { 255 } ::= { mscAal1CesProvEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.119.11.1.1 | mscAal1CesServiceType | 0 | 0 | This attribute specifies the service type for the CES. In an unstructured service, the entire data stream at the service interfa… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.2 | mscAal1CesBufferSize | 0 | 0 | On 4pDS1Aal1 and 4pE1Aal1 cards, this attribute specifies the size of the AAL1 receive segment reassembly buffer in bytes. On ini… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.4 | mscAal1CesCellLossIntegrationPeriod | 0 | 0 | This attribute specifies the cell loss integration period. This period defines the interval of time (in milliseconds) for which … |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.5 | mscAal1CesInterfaceName | 0 | 0 | This attribute identifies the instance of Chan to which an instance of Aal1Ces is linked. |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.6 | mscAal1CesPartialFill | 0 | 0 | A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.7 | mscAal1CesIdleSuppression | 0 | 0 | This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the part… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.8 | mscAal1CesIdlePattern | 0 | 0 | This attribute specifies the pattern which the bytes of an ATM payload, up to the partialFill level, must match in order for the… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.9 | mscAal1CesCellLossRecoveryPeriod | 0 | 0 | This attribute specifies the cell loss recovery period. This period defines the interval of time (in seconds) for which a loss o… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.11 | mscAal1CesMaximumBufferDelay | 0 | 0 | This attribute specifies the maximum delay that a Cell Delay Variation buffer is permitted to add to the egress stream. The dela… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.12 | mscAal1CesDp2CellDelayVariationTolerance | 0 | 0 | This attribute specifies the maximum time that a cell may arrive late, compared to a nominal time established at buffer initiali… |