A significant source of delay in a structured service is the amount of
time it takes to collect enough data to fill a cell. This period of time
can be reduced by sending cells that are only partially filled with
data (idlePattern octets are added to the ATM payload beyond the
partial fill level).
This attribute specifies the number of payload octets to fill with
data. It is applicable to structured services only, and must be set to
47 for unstructured services.
On a given AAL1 Function Processor, the maximum cell rate that
can be sustained is dependent upon the combined bandwidths of the
provisioned services, and (for structured services) the levels of
partialFill. The smaller the partialFill level, the greater the cell rate
and hence the fewer the services that can be sustained at that fill
level.
Parsed from file nortelPC-circuitEmulationServiceV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
A significant source of delay in a structured service is the amount of
time it takes to collect enough data to fill a cell. This period of time
can be reduced by sending cells that are only partially filled with
data (idlePattern octets are added to the ATM payload beyond the
partial fill level).
This attribute specifies the number of payload octets to fill with
data. It is applicable to structured services only, and must be set to
47 for unstructured services.
On a given AAL1 Function Processor, the maximum cell rate that
can be sustained is dependent upon the combined bandwidths of the
provisioned services, and (for structured services) the levels of
partialFill. The smaller the partialFill level, the greater the cell rate
and hence the fewer the services that can be sustained at that fill
level.
Parsed from file Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB.mib
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
[Automatically extracted from oidview.com]
mscAal1CesPartialFill OBJECT-TYPE SYNTAX Unsigned32 (8..47) ACCESS read-write STATUS mandatory DESCRIPTION "A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This period of time can be reduced by sending cells that are only partially filled with data (idlePattern octets are added to the ATM payload beyond the partial fill level). This attribute specifies the number of payload octets to fill with data. It is applicable to structured services only, and must be set to 47 for unstructured services. On a given AAL1 Function Processor, the maximum cell rate that can be sustained is dependent upon the combined bandwidths of the provisioned services, and (for structured services) the levels of partialFill. The smaller the partialFill level, the greater the cell rate and hence the fewer the services that can be sustained at that fill level." DEFVAL { 47 } ::= { mscAal1CesProvEntry 6 }
mscAal1CesPartialFill OBJECT-TYPE SYNTAX Unsigned32 (8..47) ACCESS read-write STATUS mandatory DESCRIPTION "A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This period of time can be reduced by sending cells that are only partially filled with data (idlePattern octets are added to the ATM payload beyond the partial fill level). This attribute specifies the number of payload octets to fill with data. It is applicable to structured services only, and must be set to 47 for unstructured services. On a given AAL1 Function Processor, the maximum cell rate that can be sustained is dependent upon the combined bandwidths of the provisioned services, and (for structured services) the levels of partialFill. The smaller the partialFill level, the greater the cell rate and hence the fewer the services that can be sustained at that fill level." DEFVAL { 47 } ::= { mscAal1CesProvEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.119.11.1.1 | mscAal1CesServiceType | 0 | 0 | This attribute specifies the service type for the CES. In an unstructured service, the entire data stream at the service interfa… |
1.3.6.1.4.1.562.36.2.1.119.11.1.2 | mscAal1CesBufferSize | 0 | 0 | On 4pDS1Aal1 and 4pE1Aal1 cards, this attribute specifies the size of the AAL1 receive segment reassembly buffer in bytes. On ini… |
1.3.6.1.4.1.562.36.2.1.119.11.1.4 | mscAal1CesCellLossIntegrationPeriod | 0 | 0 | This attribute specifies the cell loss integration period. This period defines the interval of time (in milliseconds) for which … |
1.3.6.1.4.1.562.36.2.1.119.11.1.5 | mscAal1CesInterfaceName | 0 | 0 | This attribute identifies the instance of Chan to which an instance of Aal1Ces is linked. |
1.3.6.1.4.1.562.36.2.1.119.11.1.7 | mscAal1CesIdleSuppression | 0 | 0 | This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the part… |
1.3.6.1.4.1.562.36.2.1.119.11.1.8 | mscAal1CesIdlePattern | 0 | 0 | This attribute specifies the pattern which the bytes of an ATM payload, up to the partialFill level, must match in order for the… |
1.3.6.1.4.1.562.36.2.1.119.11.1.9 | mscAal1CesCellLossRecoveryPeriod | 0 | 0 | This attribute specifies the cell loss recovery period. This period defines the interval of time (in seconds) for which a loss o… |
1.3.6.1.4.1.562.36.2.1.119.11.1.10 | mscAal1CesDummyDataByte | 0 | 0 | This attribute specifies the pattern which is played out onto the service interface to maintain bit integrity when data is unava… |
1.3.6.1.4.1.562.36.2.1.119.11.1.11 | mscAal1CesMaximumBufferDelay | 0 | 0 | This attribute specifies the maximum delay that a Cell Delay Variation buffer is permitted to add to the egress stream. The dela… |
1.3.6.1.4.1.562.36.2.1.119.11.1.12 | mscAal1CesDp2CellDelayVariationTolerance | 0 | 0 | This attribute specifies the maximum time that a cell may arrive late, compared to a nominal time established at buffer initiali… |