This attribute controls the suppression of idle cells. An idle cell is
one in which the bytes of the ATM payload (up to the partialFill
level) match the idlePattern.
If idleSuppression is off, idle cells are not suppressed.
If idleSuppression is on, at least 75% of cells are suppressed under
idle conditions.
The strategy is as follows: the first idle cell after a sequence of non-
idle cells is always sent; those that follow are suppressed. Note,
however, that at least one cell in eight is always sent (to allow the
receive end to regenerate the suppressed cells) and more often than
not, two cells are sent (the cell containing the AAL1 pointer, which
will almost always fail to match, and the one after that).
Parsed from file nortelPC-circuitEmulationServiceV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
This attribute controls the suppression of idle cells. An idle cell is
one in which the bytes of the ATM payload (up to the partialFill
level) match the idlePattern.
If idleSuppression is off, idle cells are not suppressed.
If idleSuppression is on, at least 75% of cells are suppressed under
idle conditions.
The strategy is as follows: the first idle cell after a sequence of non-
idle cells is always sent; those that follow are suppressed. Note,
however, that at least one cell in eight is always sent (to allow the
receive end to regenerate the suppressed cells) and more often than
not, two cells are sent (the cell containing the AAL1 pointer, which
will almost always fail to match, and the one after that).
Parsed from file Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB.mib
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
[Automatically extracted from oidview.com]
mscAal1CesIdleSuppression OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the partialFill level) match the idlePattern. If idleSuppression is off, idle cells are not suppressed. If idleSuppression is on, at least 75% of cells are suppressed under idle conditions. The strategy is as follows: the first idle cell after a sequence of non- idle cells is always sent; those that follow are suppressed. Note, however, that at least one cell in eight is always sent (to allow the receive end to regenerate the suppressed cells) and more often than not, two cells are sent (the cell containing the AAL1 pointer, which will almost always fail to match, and the one after that)." DEFVAL { off } ::= { mscAal1CesProvEntry 7 }
mscAal1CesIdleSuppression OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the partialFill level) match the idlePattern. If idleSuppression is off, idle cells are not suppressed. If idleSuppression is on, at least 75% of cells are suppressed under idle conditions. The strategy is as follows: the first idle cell after a sequence of non- idle cells is always sent; those that follow are suppressed. Note, however, that at least one cell in eight is always sent (to allow the receive end to regenerate the suppressed cells) and more often than not, two cells are sent (the cell containing the AAL1 pointer, which will almost always fail to match, and the one after that)." DEFVAL { off } ::= { mscAal1CesProvEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.119.11.1.1 | mscAal1CesServiceType | 0 | 0 | This attribute specifies the service type for the CES. In an unstructured service, the entire data stream at the service interfa… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.2 | mscAal1CesBufferSize | 0 | 0 | On 4pDS1Aal1 and 4pE1Aal1 cards, this attribute specifies the size of the AAL1 receive segment reassembly buffer in bytes. On ini… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.4 | mscAal1CesCellLossIntegrationPeriod | 0 | 0 | This attribute specifies the cell loss integration period. This period defines the interval of time (in milliseconds) for which … |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.5 | mscAal1CesInterfaceName | 0 | 0 | This attribute identifies the instance of Chan to which an instance of Aal1Ces is linked. |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.6 | mscAal1CesPartialFill | 0 | 0 | A significant source of delay in a structured service is the amount of time it takes to collect enough data to fill a cell. This… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.8 | mscAal1CesIdlePattern | 0 | 0 | This attribute specifies the pattern which the bytes of an ATM payload, up to the partialFill level, must match in order for the… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.9 | mscAal1CesCellLossRecoveryPeriod | 0 | 0 | This attribute specifies the cell loss recovery period. This period defines the interval of time (in seconds) for which a loss o… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.10 | mscAal1CesDummyDataByte | 0 | 0 | This attribute specifies the pattern which is played out onto the service interface to maintain bit integrity when data is unava… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.11 | mscAal1CesMaximumBufferDelay | 0 | 0 | This attribute specifies the maximum delay that a Cell Delay Variation buffer is permitted to add to the egress stream. The dela… |
| 1.3.6.1.4.1.562.36.2.1.119.11.1.12 | mscAal1CesDp2CellDelayVariationTolerance | 0 | 0 | This attribute specifies the maximum time that a cell may arrive late, compared to a nominal time established at buffer initiali… |