This attribute displays whether a Loss Of Pointer (LOP) alarm state
has been entered. An LOP alarm state is entered when LOP defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. An LOP defect occurs when no valid SPE or VC
pointer was received in 8 contiguous frames. If the LOP defects are
intermittently occurring, the LOP defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Path component goes into an operational state of disabled until
the LOP alarm condition is cleared. The condition is cleared when
no more invalid pointer has been reported for 10 seconds +/- 0.5
seconds.
The lopAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute displays whether a Loss Of Pointer (LOP) alarm state
has been entered. An LOP alarm state is entered when LOP defects
have been observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. An LOP defect occurs when no valid SPE or VC
pointer was received in 8 contiguous frames. If the LOP defects are
intermittently occurring, the LOP defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Path component goes into an operational state of disabled until
the LOP alarm condition is cleared. The condition is cleared when
no more invalid pointer has been reported for 10 seconds +/- 0.5
seconds.
The lopAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpSonetPathLopAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked." ::= { mscLpSonetPathOperEntry 1 }
mscLpSonetPathLopAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked." ::= { mscLpSonetPathOperEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.2 | mscLpSonetPathRxAisAlarm | 0 | 0 | This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is e… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.3 | mscLpSonetPathRxRfiAlarm | 0 | 0 | This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.4 | mscLpSonetPathSignalLabelMismatch | 0 | 0 | This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure cond… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.5 | mscLpSonetPathTxAis | 0 | 0 | mscLpSonetPathtxAis |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.6 | mscLpSonetPathTxRdi | 0 | 0 | mscLpSonetPathtxRdi |