This attribute displays whether the Path Signal Label Mismatch (P-
SLM) failure condition has been entered. An P-SLM failure
condition is entered when P-SLM defects have been observed and
accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM
defect occurs when detecting an unexpected path signal label. The
expected Path signal labels are 'Mapping for ATM' or 'Equipped -
Non Specific Payload'. If the P-SLM defects are intermittently
occurring, the P-SLM defect accumulator is decremented at a rate
of 1/10 of the incrementing rate (alarm integration ratio of 1/10),
with all measurements based on a 200 ms polling cycle.
The Path component goes into an operational state of disabled until
the Path Signal Label Mismatch failure condition is cleared. The
condition is cleared when an expected path signal label is received
for 10 seconds +/- 0.5 seconds.
The signalLabelMismatch attribute is always set to off when the
Path component has been locked and left offline by the operator or
when the Path component has been suspended since the parent
component has been locked.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute displays whether the Path Signal Label Mismatch (P-
SLM) failure condition has been entered. An P-SLM failure
condition is entered when P-SLM defects have been observed and
accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM
defect occurs when detecting an unexpected path signal label. The
expected Path signal labels are 'Mapping for ATM' or 'Equipped -
Non Specific Payload'. If the P-SLM defects are intermittently
occurring, the P-SLM defect accumulator is decremented at a rate
of 1/10 of the incrementing rate (alarm integration ratio of 1/10),
with all measurements based on a 200 ms polling cycle.
The Path component goes into an operational state of disabled until
the Path Signal Label Mismatch failure condition is cleared. The
condition is cleared when an expected path signal label is received
for 10 seconds +/- 0.5 seconds.
The signalLabelMismatch attribute is always set to off when the
Path component has been locked and left offline by the operator or
when the Path component has been suspended since the parent
component has been locked.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpSonetPathSignalLabelMismatch OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked." ::= { mscLpSonetPathOperEntry 4 }
mscLpSonetPathSignalLabelMismatch OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked." ::= { mscLpSonetPathOperEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.1 | mscLpSonetPathLopAlarm | 0 | 0 | This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP def… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.2 | mscLpSonetPathRxAisAlarm | 0 | 0 | This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is e… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.3 | mscLpSonetPathRxRfiAlarm | 0 | 0 | This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.5 | mscLpSonetPathTxAis | 0 | 0 | mscLpSonetPathtxAis |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.6 | mscLpSonetPathTxRdi | 0 | 0 | mscLpSonetPathtxRdi |