This attribute defines the intended gender of the V.35 interface. The
actual gender of the interface is determined by the physical
connection to the patch panel. If the hardware setup does not match
this attribute, an alarm will be generated.
In dte mode, the RTS line signal is driven as specified by the
attribute readyLineState when the interface passes its initial
diagnostics. Then, the RTS line signal will be driven as specified in
the attribute dataTransferLineState when the application is ready to
transfer data. On the other hand, the input line signals (RFS, DSR,
and DCD) are compared against those specified in the attributes
readyLineState and dataTransferLineState. The application will be
notified when the specified input line states are observed.
In dce mode, the V35 component behaves similarly as when it is in
dte mode. However, it will be driving the DCE line signals (RFS,
DSR, and DCD) and monitoring the DTE line signal (RTS) as
specified by the attributes readyLineState and
dataTransferLineState.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute defines the intended gender of the V.35 interface. The
actual gender of the interface is determined by the physical
connection to the patch panel. If the hardware setup does not match
this attribute, an alarm will be generated.
In dte mode, the RTS line signal is driven as specified by the
attribute readyLineState when the interface passes its initial
diagnostics. Then, the RTS line signal will be driven as specified in
the attribute dataTransferLineState when the application is ready to
transfer data. On the other hand, the input line signals (RFS, DSR,
and DCD) are compared against those specified in the attributes
readyLineState and dataTransferLineState. The application will be
notified when the specified input line states are observed.
In dce mode, the V35 component behaves similarly as when it is in
dte mode. However, it will be driving the DCE line signals (RFS,
DSR, and DCD) and monitoring the DTE line signal (RTS) as
specified by the attributes readyLineState and
dataTransferLineState.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpV35LinkMode OBJECT-TYPE SYNTAX INTEGER { dte(0), dce(128) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState." DEFVAL { dte } ::= { mscLpV35ProvEntry 1 }
mscLpV35LinkMode OBJECT-TYPE SYNTAX INTEGER { dte(0), dce(128) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState." DEFVAL { dte } ::= { mscLpV35ProvEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.2 | mscLpV35ReadyLineState | 0 | 0 | This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interf… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.3 | mscLpV35DataTransferLineState | 0 | 0 | This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data tra… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.4 | mscLpV35LineStatusTimeOut | 0 | 0 | This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.5 | mscLpV35LineSpeed | 0 | 0 | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a … |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.6 | mscLpV35ClockingSource | 0 | 0 | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.7 | mscLpV35DteDataClockSource | 0 | 0 | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.8 | mscLpV35ApplicationFramerName | 0 | 0 | This attribute contains the component name of a Framer which is associated with the V35 component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.9 | mscLpV35EnableDynamicSpeed | 0 | 0 | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This… |