This attribute specifies the line signals originating from the V.35
interface that will always be turned on, provided the interface passes
its diagnostics. This set of signals is generally required for
maintaining the connection. Note that both DTE and DCE signals
are specified in this attribute. The appropriate set of specified
signals will be turned on or checked according to the
actualLinkMode.
See also linkMode.
Description of bits:
rfs(0)
dsr(1)
dcd(2)
rts(3)
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute specifies the line signals originating from the V.35
interface that will always be turned on, provided the interface passes
its diagnostics. This set of signals is generally required for
maintaining the connection. Note that both DTE and DCE signals
are specified in this attribute. The appropriate set of specified
signals will be turned on or checked according to the
actualLinkMode.
See also linkMode.
Description of bits:
rfs(0)
dsr(1)
dcd(2)
rts(3)
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpV35ReadyLineState OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)" DEFVAL { 'f0'H } ::= { mscLpV35ProvEntry 2 }
mscLpV35ReadyLineState OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)" DEFVAL { 'f0'H } ::= { mscLpV35ProvEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.1 | mscLpV35LinkMode | 0 | 0 | This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physic… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.3 | mscLpV35DataTransferLineState | 0 | 0 | This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data tra… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.4 | mscLpV35LineStatusTimeOut | 0 | 0 | This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.5 | mscLpV35LineSpeed | 0 | 0 | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a … |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.6 | mscLpV35ClockingSource | 0 | 0 | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.7 | mscLpV35DteDataClockSource | 0 | 0 | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.8 | mscLpV35ApplicationFramerName | 0 | 0 | This attribute contains the component name of a Framer which is associated with the V35 component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.9 | mscLpV35EnableDynamicSpeed | 0 | 0 | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This… |