This attribute is only used when the actualLinkMode is dce. It is
used to determine the clock to be used to recover the receive data. A
DTE interface uses TSET(DCE) and RSET(DCE) for timing.
If the value of the attribute is fromDce, the DCE uses the internally
generated transmit clock to supply both TSET(DCE) and
RSET(DCE).
If the value of the attribute is fromDte, the DCE still uses the
internally generated transmit clock to supply TSET(DCE), but the
receive timing is derived from TSET(DTE) on the link.
The fromDte mode is recommended when the DTE is far away from
the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit
113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is
CCITT V.24 circuit 115.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute is only used when the actualLinkMode is dce. It is
used to determine the clock to be used to recover the receive data. A
DTE interface uses TSET(DCE) and RSET(DCE) for timing.
If the value of the attribute is fromDce, the DCE uses the internally
generated transmit clock to supply both TSET(DCE) and
RSET(DCE).
If the value of the attribute is fromDte, the DCE still uses the
internally generated transmit clock to supply TSET(DCE), but the
receive timing is derived from TSET(DTE) on the link.
The fromDte mode is recommended when the DTE is far away from
the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit
113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is
CCITT V.24 circuit 115.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpV35DteDataClockSource OBJECT-TYPE SYNTAX INTEGER { fromDce(0), fromDte(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115." DEFVAL { fromDce } ::= { mscLpV35ProvEntry 7 }
mscLpV35DteDataClockSource OBJECT-TYPE SYNTAX INTEGER { fromDce(0), fromDte(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115." DEFVAL { fromDce } ::= { mscLpV35ProvEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.1 | mscLpV35LinkMode | 0 | 0 | This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physic… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.2 | mscLpV35ReadyLineState | 0 | 0 | This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interf… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.3 | mscLpV35DataTransferLineState | 0 | 0 | This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data tra… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.4 | mscLpV35LineStatusTimeOut | 0 | 0 | This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.5 | mscLpV35LineSpeed | 0 | 0 | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a … |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.6 | mscLpV35ClockingSource | 0 | 0 | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.8 | mscLpV35ApplicationFramerName | 0 | 0 | This attribute contains the component name of a Framer which is associated with the V35 component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.9 | mscLpV35EnableDynamicSpeed | 0 | 0 | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This… |