This attribute specifies the encoding of voice traffic.
A voiceEncoding setting of g711G726 specifies that either pulse
code modulation (PCM) defined by ITU-T G.711 or adaptive
differential pulse code modulation (ADPCM) defined by ITU-T
G.726 is used to encode voice traffic. The actual encoding
performed depends on congestion in the network and the settings of
minVoiceG711G726Rate and maxVoiceG711G726Rate. If
voiceEncoding is g711G726, the bit rate of voice traffic can change
during a call due to congestion in the network. In this case, the
minimum and maximum rates that can occur during a call are
specified by minVoiceG711G726Rate and maxVoiceG711G726Rate
respectively. If voiceEncoding is g711G726,
minVoiceG711G726Rate is 64 and maxVoiceG711G726Rate is 64,
G.711 (PCM) encoding is always performed on voice traffic on this
channel and all voice traffic is carried uncompressed at 64 kbit/s.
A voiceEncoding setting of g728at16 specifies that the Low Delay
Coded Excited Linear Predictive Coder (LD-CELP) algorithm
defined by ITU-T G.728 is always performed on voice traffic. If
voiceEncoding is g728at16, the bit rate of all voice traffic is fixed at
16 kbit/s. The minVoiceG711G726Rate and
maxVoiceG711G726Rate attributes do not apply if voiceEncoding is
g728at16.
A voiceEncoding setting of g729at8 indicates that the Conjugated
Structure Algebraic Code Excited Linear Predictive Coder (CS-
ACELP) algorithm defined by ITU-T G.729 is always performed on
voice traffic. If voiceEncoding is g729at8, the bit rate of all voice
traffic is fixed at 8 kbit/s. The minVoiceG711G726Rate and
maxVoiceG711G726Rate attributes do not apply if voiceEncoding is
g729at8.
Parsed from file nortelPC-dcmeV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
This attribute specifies the encoding of voice traffic.
A voiceEncoding setting of g711G726 specifies that either pulse
code modulation (PCM) defined by ITU-T G.711 or adaptive
differential pulse code modulation (ADPCM) defined by ITU-T
G.726 is used to encode voice traffic. The actual encoding
performed depends on congestion in the network and the settings of
minVoiceG711G726Rate and maxVoiceG711G726Rate. If
voiceEncoding is g711G726, the bit rate of voice traffic can change
during a call due to congestion in the network. In this case, the
minimum and maximum rates that can occur during a call are
specified by minVoiceG711G726Rate and maxVoiceG711G726Rate
respectively. If voiceEncoding is g711G726,
minVoiceG711G726Rate is 64 and maxVoiceG711G726Rate is 64,
G.711 (PCM) encoding is always performed on voice traffic on this
channel and all voice traffic is carried uncompressed at 64 kbit/s.
A voiceEncoding setting of g728at16 specifies that the Low Delay
Coded Excited Linear Predictive Coder (LD-CELP) algorithm
defined by ITU-T G.728 is always performed on voice traffic. If
voiceEncoding is g728at16, the bit rate of all voice traffic is fixed at
16 kbit/s. The minVoiceG711G726Rate and
maxVoiceG711G726Rate attributes do not apply if voiceEncoding is
g728at16.
A voiceEncoding setting of g729at8 indicates that the Conjugated
Structure Algebraic Code Excited Linear Predictive Coder (CS-
ACELP) algorithm defined by ITU-T G.729 is always performed on
voice traffic. If voiceEncoding is g729at8, the bit rate of all voice
traffic is fixed at 8 kbit/s. The minVoiceG711G726Rate and
maxVoiceG711G726Rate attributes do not apply if voiceEncoding is
g729at8.
Parsed from file Nortel-MsCarrier-MscPassport-DcmeMIB.mib
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
[Automatically extracted from oidview.com]
mscDcmeProfileVoiceEncoding OBJECT-TYPE SYNTAX INTEGER { g711G726(0), g728at16(1), g729at8(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encoding of voice traffic. A voiceEncoding setting of g711G726 specifies that either pulse code modulation (PCM) defined by ITU-T G.711 or adaptive differential pulse code modulation (ADPCM) defined by ITU-T G.726 is used to encode voice traffic. The actual encoding performed depends on congestion in the network and the settings of minVoiceG711G726Rate and maxVoiceG711G726Rate. If voiceEncoding is g711G726, the bit rate of voice traffic can change during a call due to congestion in the network. In this case, the minimum and maximum rates that can occur during a call are specified by minVoiceG711G726Rate and maxVoiceG711G726Rate respectively. If voiceEncoding is g711G726, minVoiceG711G726Rate is 64 and maxVoiceG711G726Rate is 64, G.711 (PCM) encoding is always performed on voice traffic on this channel and all voice traffic is carried uncompressed at 64 kbit/s. A voiceEncoding setting of g728at16 specifies that the Low Delay Coded Excited Linear Predictive Coder (LD-CELP) algorithm defined by ITU-T G.728 is always performed on voice traffic. If voiceEncoding is g728at16, the bit rate of all voice traffic is fixed at 16 kbit/s. The minVoiceG711G726Rate and maxVoiceG711G726Rate attributes do not apply if voiceEncoding is g728at16. A voiceEncoding setting of g729at8 indicates that the Conjugated Structure Algebraic Code Excited Linear Predictive Coder (CS- ACELP) algorithm defined by ITU-T G.729 is always performed on voice traffic. If voiceEncoding is g729at8, the bit rate of all voice traffic is fixed at 8 kbit/s. The minVoiceG711G726Rate and maxVoiceG711G726Rate attributes do not apply if voiceEncoding is g729at8." DEFVAL { g728at16 } ::= { mscDcmeProfileFrOpsEntry 1 }
mscDcmeProfileVoiceEncoding OBJECT-TYPE SYNTAX INTEGER { g711G726(0), g728at16(1), g729at8(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encoding of voice traffic. A voiceEncoding setting of g711G726 specifies that either pulse code modulation (PCM) defined by ITU-T G.711 or adaptive differential pulse code modulation (ADPCM) defined by ITU-T G.726 is used to encode voice traffic. The actual encoding performed depends on congestion in the network and the settings of minVoiceG711G726Rate and maxVoiceG711G726Rate. If voiceEncoding is g711G726, the bit rate of voice traffic can change during a call due to congestion in the network. In this case, the minimum and maximum rates that can occur during a call are specified by minVoiceG711G726Rate and maxVoiceG711G726Rate respectively. If voiceEncoding is g711G726, minVoiceG711G726Rate is 64 and maxVoiceG711G726Rate is 64, G.711 (PCM) encoding is always performed on voice traffic on this channel and all voice traffic is carried uncompressed at 64 kbit/s. A voiceEncoding setting of g728at16 specifies that the Low Delay Coded Excited Linear Predictive Coder (LD-CELP) algorithm defined by ITU-T G.728 is always performed on voice traffic. If voiceEncoding is g728at16, the bit rate of all voice traffic is fixed at 16 kbit/s. The minVoiceG711G726Rate and maxVoiceG711G726Rate attributes do not apply if voiceEncoding is g728at16. A voiceEncoding setting of g729at8 indicates that the Conjugated Structure Algebraic Code Excited Linear Predictive Coder (CS- ACELP) algorithm defined by ITU-T G.729 is always performed on voice traffic. If voiceEncoding is g729at8, the bit rate of all voice traffic is fixed at 8 kbit/s. The minVoiceG711G726Rate and maxVoiceG711G726Rate attributes do not apply if voiceEncoding is g729at8." DEFVAL { g728at16 } ::= { mscDcmeProfileFrOpsEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.2 | mscDcmeProfileMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a voice call on this channel w… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.3 | mscDcmeProfileMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a voice call on this channel w… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.4 | mscDcmeProfileVoiceTrafficOptimization | 0 | 0 | This attribute specifies how to optimize voice traffic. If voiceTrafficOptimization is bandwidth, voice traffic is optimized to p… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.5 | mscDcmeProfileSilenceSuppression | 0 | 0 | This attribute specifies when silence suppression is performed. It applies to both voice and modem calls. If silenceSuppression i… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.6 | mscDcmeProfileSilenceSuppressionFactor | 0 | 0 | This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silen… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.7 | mscDcmeProfileEchoCancellation | 0 | 0 | This attribute specifies whether echo cancellation is performed on calls using this profile as specified by ITU-T G.165. It appl… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.9 | mscDcmeProfileModemFaxEncoding | 0 | 0 | This attribute specifies how modem and fax traffic is encoded. Modem and fax traffic are identified by an inband 2100 Hz tone. Pr… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.10 | mscDcmeProfileMaxModemFaxG711G726Rate | 0 | 0 | This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a modem call on this channel. … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.11 | mscDcmeProfileMinModemFaxG711G726Rate | 0 | 0 | This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a modem call on this channel. … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.12 | mscDcmeProfileFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies whether fax idle suppression is performed on fax traffic on calls using this profile. It only applies t… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.13 | mscDcmeProfileInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.14 | mscDcmeProfileIngressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.15 | mscDcmeProfileEgressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data leaving the network on this route. It applies to voice, modem an… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.16 | mscDcmeProfileSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. H… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.17 | mscDcmeProfileComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.18 | mscDcmeProfileModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this Dcme differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is on and… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.19 | mscDcmeProfileV17EncodedAsG711G726 | 0 | 0 | This attribute specifies how services using this Profile negotiate with V.17 fax machines. This attribute is not used unless the… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.20 | mscDcmeProfileDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.21 | mscDcmeProfileMaxFaxRelayRate | 0 | 0 | This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or f… |