This attribute specifies whether this Dcme differentiates between
modemFax traffic and speech. If modemFaxSpeechDiscrim is on
and a false 2100 Hz tone is detected, any Vs under this Dcme reverts
to speech mode when speech is detected.
Parsed from file nortelPC-dcmeV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
This attribute specifies whether this Dcme differentiates between
modemFax traffic and speech. If modemFaxSpeechDiscrim is on
and a false 2100 Hz tone is detected, any Vs under this Dcme reverts
to speech mode when speech is detected.
Parsed from file Nortel-MsCarrier-MscPassport-DcmeMIB.mib
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
[Automatically extracted from oidview.com]
mscDcmeProfileModemFaxSpeechDiscrim OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this Dcme differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is on and a false 2100 Hz tone is detected, any Vs under this Dcme reverts to speech mode when speech is detected." DEFVAL { on } ::= { mscDcmeProfileFrOpsEntry 18 }
mscDcmeProfileModemFaxSpeechDiscrim OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this Dcme differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is on and a false 2100 Hz tone is detected, any Vs under this Dcme reverts to speech mode when speech is detected." DEFVAL { on } ::= { mscDcmeProfileFrOpsEntry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.1 | mscDcmeProfileVoiceEncoding | 0 | 0 | This attribute specifies the encoding of voice traffic. A voiceEncoding setting of g711G726 specifies that either pulse code mod… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.2 | mscDcmeProfileMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a voice call on this channel w… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.3 | mscDcmeProfileMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a voice call on this channel w… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.4 | mscDcmeProfileVoiceTrafficOptimization | 0 | 0 | This attribute specifies how to optimize voice traffic. If voiceTrafficOptimization is bandwidth, voice traffic is optimized to p… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.5 | mscDcmeProfileSilenceSuppression | 0 | 0 | This attribute specifies when silence suppression is performed. It applies to both voice and modem calls. If silenceSuppression i… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.6 | mscDcmeProfileSilenceSuppressionFactor | 0 | 0 | This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silen… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.7 | mscDcmeProfileEchoCancellation | 0 | 0 | This attribute specifies whether echo cancellation is performed on calls using this profile as specified by ITU-T G.165. It appl… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.9 | mscDcmeProfileModemFaxEncoding | 0 | 0 | This attribute specifies how modem and fax traffic is encoded. Modem and fax traffic are identified by an inband 2100 Hz tone. Pr… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.10 | mscDcmeProfileMaxModemFaxG711G726Rate | 0 | 0 | This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a modem call on this channel. … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.11 | mscDcmeProfileMinModemFaxG711G726Rate | 0 | 0 | This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a modem call on this channel. … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.12 | mscDcmeProfileFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies whether fax idle suppression is performed on fax traffic on calls using this profile. It only applies t… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.13 | mscDcmeProfileInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.14 | mscDcmeProfileIngressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.15 | mscDcmeProfileEgressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data leaving the network on this route. It applies to voice, modem an… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.16 | mscDcmeProfileSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. H… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.17 | mscDcmeProfileComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.19 | mscDcmeProfileV17EncodedAsG711G726 | 0 | 0 | This attribute specifies how services using this Profile negotiate with V.17 fax machines. This attribute is not used unless the… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.20 | mscDcmeProfileDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.21 | mscDcmeProfileMaxFaxRelayRate | 0 | 0 | This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or f… |