This attribute specifies how services using this Profile negotiate
with V.17 fax machines. This attribute is not used unless the
modemFaxEncoding, defined in this Profile, is faxRelayG711G726
If v17EncodedAsG711G726 is no, V.17 fax machines are instructed
to use V.29 and V.29 fax traffic sent by fax machines is demodulated
and encoded using fax relay.
If v17EncodedAsG711G726 is yes, V.17 fax machines are permitted
to use V.17 and V.17 fax traffic sent by fax machines is encoded
using G.711 or G.726. The actual encoding performed depends on
the minModemFaxG711G726Rate and
maxModemFaxG711G726Rate, available in this Profile.
Parsed from file nortelPC-dcmeV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
This attribute specifies how services using this Profile negotiate
with V.17 fax machines. This attribute is not used unless the
modemFaxEncoding, defined in this Profile, is faxRelayG711G726
If v17EncodedAsG711G726 is no, V.17 fax machines are instructed
to use V.29 and V.29 fax traffic sent by fax machines is demodulated
and encoded using fax relay.
If v17EncodedAsG711G726 is yes, V.17 fax machines are permitted
to use V.17 and V.17 fax traffic sent by fax machines is encoded
using G.711 or G.726. The actual encoding performed depends on
the minModemFaxG711G726Rate and
maxModemFaxG711G726Rate, available in this Profile.
Parsed from file Nortel-MsCarrier-MscPassport-DcmeMIB.mib
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
[Automatically extracted from oidview.com]
mscDcmeProfileV17EncodedAsG711G726 OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how services using this Profile negotiate with V.17 fax machines. This attribute is not used unless the modemFaxEncoding, defined in this Profile, is faxRelayG711G726 If v17EncodedAsG711G726 is no, V.17 fax machines are instructed to use V.29 and V.29 fax traffic sent by fax machines is demodulated and encoded using fax relay. If v17EncodedAsG711G726 is yes, V.17 fax machines are permitted to use V.17 and V.17 fax traffic sent by fax machines is encoded using G.711 or G.726. The actual encoding performed depends on the minModemFaxG711G726Rate and maxModemFaxG711G726Rate, available in this Profile." DEFVAL { no } ::= { mscDcmeProfileFrOpsEntry 19 }
mscDcmeProfileV17EncodedAsG711G726 OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how services using this Profile negotiate with V.17 fax machines. This attribute is not used unless the modemFaxEncoding, defined in this Profile, is faxRelayG711G726 If v17EncodedAsG711G726 is no, V.17 fax machines are instructed to use V.29 and V.29 fax traffic sent by fax machines is demodulated and encoded using fax relay. If v17EncodedAsG711G726 is yes, V.17 fax machines are permitted to use V.17 and V.17 fax traffic sent by fax machines is encoded using G.711 or G.726. The actual encoding performed depends on the minModemFaxG711G726Rate and maxModemFaxG711G726Rate, available in this Profile." DEFVAL { no } ::= { mscDcmeProfileFrOpsEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.1 | mscDcmeProfileVoiceEncoding | 0 | 0 | This attribute specifies the encoding of voice traffic. A voiceEncoding setting of g711G726 specifies that either pulse code mod… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.2 | mscDcmeProfileMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a voice call on this channel w… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.3 | mscDcmeProfileMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a voice call on this channel w… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.4 | mscDcmeProfileVoiceTrafficOptimization | 0 | 0 | This attribute specifies how to optimize voice traffic. If voiceTrafficOptimization is bandwidth, voice traffic is optimized to p… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.5 | mscDcmeProfileSilenceSuppression | 0 | 0 | This attribute specifies when silence suppression is performed. It applies to both voice and modem calls. If silenceSuppression i… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.6 | mscDcmeProfileSilenceSuppressionFactor | 0 | 0 | This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silen… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.7 | mscDcmeProfileEchoCancellation | 0 | 0 | This attribute specifies whether echo cancellation is performed on calls using this profile as specified by ITU-T G.165. It appl… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.9 | mscDcmeProfileModemFaxEncoding | 0 | 0 | This attribute specifies how modem and fax traffic is encoded. Modem and fax traffic are identified by an inband 2100 Hz tone. Pr… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.10 | mscDcmeProfileMaxModemFaxG711G726Rate | 0 | 0 | This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a modem call on this channel. … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.11 | mscDcmeProfileMinModemFaxG711G726Rate | 0 | 0 | This attribute specifies the minimum possible bit rate (maximum possible compression rate) during a modem call on this channel. … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.12 | mscDcmeProfileFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies whether fax idle suppression is performed on fax traffic on calls using this profile. It only applies t… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.13 | mscDcmeProfileInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.14 | mscDcmeProfileIngressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.15 | mscDcmeProfileEgressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data leaving the network on this route. It applies to voice, modem an… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.16 | mscDcmeProfileSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. H… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.17 | mscDcmeProfileComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.18 | mscDcmeProfileModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this Dcme differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is on and… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.20 | mscDcmeProfileDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.21 | mscDcmeProfileMaxFaxRelayRate | 0 | 0 | This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or f… |