This attribute specifies whether revertive switching is to be used. It
has possible values of no or yes.
When this attribute is no, the Aps will not revert the receive active
line from protection back to working when a working line request is
cleared.
When this attribute is yes, the Aps will revert the receive active line
from protection back to working when a working line request is
cleared, after the provisioned waitToRestorePeriod has expired.
Note that it is acceptable for the near end and far end to be
provisioned with a mix of revertive and nonrevertive switching.
Parsed from file nortelPC-apsV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-ApsMIB
This attribute specifies whether revertive switching is to be used. It
has possible values of no or yes.
When this attribute is no, the Aps will not revert the receive active
line from protection back to working when a working line request is
cleared.
When this attribute is yes, the Aps will revert the receive active line
from protection back to working when a working line request is
cleared, after the provisioned waitToRestorePeriod has expired.
Note that it is acceptable for the near end and far end to be
provisioned with a mix of revertive and nonrevertive switching.
Parsed from file Nortel-MsCarrier-MscPassport-ApsMIB.mib
Module: Nortel-MsCarrier-MscPassport-ApsMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-ApsMIB
[Automatically extracted from oidview.com]
mscApsRevertive OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether revertive switching is to be used. It has possible values of no or yes. When this attribute is no, the Aps will not revert the receive active line from protection back to working when a working line request is cleared. When this attribute is yes, the Aps will revert the receive active line from protection back to working when a working line request is cleared, after the provisioned waitToRestorePeriod has expired. Note that it is acceptable for the near end and far end to be provisioned with a mix of revertive and nonrevertive switching." DEFVAL { no } ::= { mscApsProvEntry 5 }
mscApsRevertive OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether revertive switching is to be used. It has possible values of no or yes. When this attribute is no, the Aps will not revert the receive active line from protection back to working when a working line request is cleared. When this attribute is yes, the Aps will revert the receive active line from protection back to working when a working line request is cleared, after the provisioned waitToRestorePeriod has expired. Note that it is acceptable for the near end and far end to be provisioned with a mix of revertive and nonrevertive switching." DEFVAL { no } ::= { mscApsProvEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.134.11.1.1 | mscApsApplicationFramerName | 0 | 0 | This attribute is a link to the service component which utilizes the protected Sonet or Sdh interface managed by the Aps compone… |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.2 | mscApsWorkingLine | 0 | 0 | This attribute is a link to the Path component whose parent Sonet or Sdh component provides the Aps' working line. A value must … |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.3 | mscApsProtectionLine | 0 | 0 | This attribute is a link to the Path component whose parent Sonet or Sdh component provides the Aps' protection line. A value mu… |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.4 | mscApsMode | 0 | 0 | This attribute specifies the protection mode to use. It has possible values of unidirectional and bidirectional. The unidirectio… |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.6 | mscApsHoldOffTime | 0 | 0 | mscApsHoldOfftime |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.7 | mscApsWaitToRestorePeriod | 0 | 0 | This attribute specifies the time during which the protection line will remain the receive active line after the working line re… |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.8 | mscApsSignalDegradeRatio | 0 | 0 | This attribute specifies the minimum bit error ratio (BER) for which a Signal Degrade failure is declared. Its value is the expo… |