This attribute specifies the data path to be used by Virtual Circuits
on this interface. The value of the dataPath attribute in the Dna
component is overridden by this attribute if the value is not
useDnaValue.
This value applies to the connection after data transfer state is
reached. All the data and control traffic will be sent using this data
path. If the provisioned dataPath is not available the connection is
not established.
The value of the dataPath is signalled by both ends of the
connection. If this value is not the same at both ends dprsOnly is
used for the duration of the connection.
A virtual circuit connection is always established using dprsOnly
even if this attribute is provisioned as some other value.
dprsOnly - The dynamic packet routing system is used.
dprsMcsOnly - The DPRS Multi-Service Cut-Through Switching
path is used.
dprsMcsFirst - The DPRS Multi-Service Cut-Through Switching
path is used if it is available. If it is not available, dprsOnly is used.
useDnaValue - The routing system used is based on the value
provisioned in the Dna component.
Parsed from file nortelPC-frameRelayUniV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
This attribute specifies the data path to be used by Virtual Circuits
on this interface. The value of the dataPath attribute in the Dna
component is overridden by this attribute if the value is not
useDnaValue.
This value applies to the connection after data transfer state is
reached. All the data and control traffic will be sent using this data
path. If the provisioned dataPath is not available the connection is
not established.
The value of the dataPath is signalled by both ends of the
connection. If this value is not the same at both ends dprsOnly is
used for the duration of the connection.
A virtual circuit connection is always established using dprsOnly
even if this attribute is provisioned as some other value.
dprsOnly - The dynamic packet routing system is used.
dprsMcsOnly - The DPRS Multi-Service Cut-Through Switching
path is used.
dprsMcsFirst - The DPRS Multi-Service Cut-Through Switching
path is used if it is available. If it is not available, dprsOnly is used.
useDnaValue - The routing system used is based on the value
provisioned in the Dna component.
Parsed from file Nortel-MsCarrier-MscPassport-FrameRelayUniMIB.mib
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
[Automatically extracted from oidview.com]
mscFrUniDlciDcDataPath OBJECT-TYPE SYNTAX INTEGER { dprsOnly(0), dprsMcsOnly(1), dprsMcsFirst(2), useDnaValue(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden by this attribute if the value is not useDnaValue. This value applies to the connection after data transfer state is reached. All the data and control traffic will be sent using this data path. If the provisioned dataPath is not available the connection is not established. The value of the dataPath is signalled by both ends of the connection. If this value is not the same at both ends dprsOnly is used for the duration of the connection. A virtual circuit connection is always established using dprsOnly even if this attribute is provisioned as some other value. dprsOnly - The dynamic packet routing system is used. dprsMcsOnly - The DPRS Multi-Service Cut-Through Switching path is used. dprsMcsFirst - The DPRS Multi-Service Cut-Through Switching path is used if it is available. If it is not available, dprsOnly is used. useDnaValue - The routing system used is based on the value provisioned in the Dna component." DEFVAL { useDnaValue } ::= { mscFrUniDlciDcOptionsEntry 12 }
mscFrUniDlciDcDataPath OBJECT-TYPE SYNTAX INTEGER { dprsOnly(0), dprsMcsOnly(1), dprsMcsFirst(2), useDnaValue(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden by this attribute if the value is not useDnaValue. This value applies to the connection after data transfer state is reached. All the data and control traffic will be sent using this data path. If the provisioned dataPath is not available the connection is not established. The value of the dataPath is signalled by both ends of the connection. If this value is not the same at both ends dprsOnly is used for the duration of the connection. A virtual circuit connection is always established using dprsOnly even if this attribute is provisioned as some other value. dprsOnly - The dynamic packet routing system is used. dprsMcsOnly - The DPRS Multi-Service Cut-Through Switching path is used. dprsMcsFirst - The DPRS Multi-Service Cut-Through Switching path is used if it is available. If it is not available, dprsOnly is used. useDnaValue - The routing system used is based on the value provisioned in the Dna component." DEFVAL { useDnaValue } ::= { mscFrUniDlciDcOptionsEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.3 | mscFrUniDlciDcRemoteNpi | 0 | 0 | This attribute specifies the Numbering Plan Indicator (NPI) of the remoteDna. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.4 | mscFrUniDlciDcRemoteDna | 0 | 0 | This attribute specifies the Data Network Address (DNA) of the service at the remote end of the DLCI. This is the called (destina… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.5 | mscFrUniDlciDcRemoteDlci | 0 | 0 | This attribute specifies the remote DLCI of the PVC connection. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.6 | mscFrUniDlciDcType | 0 | 0 | This attribute specifies the type of VC call. If the value is set to permanentMaster, then a permanent connection will be establ… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.9 | mscFrUniDlciDcTransferPriority | 0 | 0 | This attribute specifies the transfer priority to the local network for the outgoing calls using this particular DLCI. It overri… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.10 | mscFrUniDlciDcDiscardPriority | 0 | 0 | This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning val… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.11 | mscFrUniDlciDcDeDiscardPriority | 0 | 0 | This attribute specifies whether the discardPriority applies to DE frames for this DLCI. When set to determinedByDiscardPriority… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.13 | mscFrUniDlciDcCugIndex | 0 | 0 | This attribute specifies the CUG index which is to be signalled in PVC and SPVC call requests to the remote end. The type of CUG… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.14 | mscFrUniDlciDcCugType | 0 | 0 | This attribute specifies the type of CUG signalling to be used in PVC and SPVC call requests. Index of CUG to be used is defined… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.15 | mscFrUniDlciDcMapIpCosToFrQos | 0 | 0 | This attribute specifies whether an IP TOS value is mapped to an FR QOS. The mapping used is provisioned in the Mod Frs IpCosToFr… |