This attribute specifies the transfer priority to the local network for
the outgoing calls using this particular DLCI. It overrides the
defaultTransferPriority provisioned in its associated Dna
component.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
levels from 0 to 15.
Each transfer priority n, where n is the transfer priority index, has a
default setting for routing class of service (multimedia, delay, or
throughput) and Frame Relay egress queue (depending on the
number of supported egress queues on the remote end interface).
These settings are specified by the routingClassOfService and
emissionPriority attributes provisioned under the Mod Frs DprsNet
Tpm/n component.
Specifying useDnaDefTP means using the value given by
defaultTransferPriority in the associated Dna for this DLCI.
Parsed from file nortelPC-frameRelayUniV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
This attribute specifies the transfer priority to the local network for
the outgoing calls using this particular DLCI. It overrides the
defaultTransferPriority provisioned in its associated Dna
component.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
levels from 0 to 15.
Each transfer priority n, where n is the transfer priority index, has a
default setting for routing class of service (multimedia, delay, or
throughput) and Frame Relay egress queue (depending on the
number of supported egress queues on the remote end interface).
These settings are specified by the routingClassOfService and
emissionPriority attributes provisioned under the Mod Frs DprsNet
Tpm/n component.
Specifying useDnaDefTP means using the value given by
defaultTransferPriority in the associated Dna for this DLCI.
Parsed from file Nortel-MsCarrier-MscPassport-FrameRelayUniMIB.mib
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
[Automatically extracted from oidview.com]
mscFrUniDlciDcTransferPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), useDnaDefTP(255) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the transfer priority to the local network for the outgoing calls using this particular DLCI. It overrides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 levels from 0 to 15. Each transfer priority n, where n is the transfer priority index, has a default setting for routing class of service (multimedia, delay, or throughput) and Frame Relay egress queue (depending on the number of supported egress queues on the remote end interface). These settings are specified by the routingClassOfService and emissionPriority attributes provisioned under the Mod Frs DprsNet Tpm/n component. Specifying useDnaDefTP means using the value given by defaultTransferPriority in the associated Dna for this DLCI." DEFVAL { useDnaDefTP } ::= { mscFrUniDlciDcOptionsEntry 9 }
mscFrUniDlciDcTransferPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), useDnaDefTP(255) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the transfer priority to the local network for the outgoing calls using this particular DLCI. It overrides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 levels from 0 to 15. Each transfer priority n, where n is the transfer priority index, has a default setting for routing class of service (multimedia, delay, or throughput) and Frame Relay egress queue (depending on the number of supported egress queues on the remote end interface). These settings are specified by the routingClassOfService and emissionPriority attributes provisioned under the Mod Frs DprsNet Tpm/n component. Specifying useDnaDefTP means using the value given by defaultTransferPriority in the associated Dna for this DLCI." DEFVAL { useDnaDefTP } ::= { mscFrUniDlciDcOptionsEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.3 | mscFrUniDlciDcRemoteNpi | 0 | 0 | This attribute specifies the Numbering Plan Indicator (NPI) of the remoteDna. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.4 | mscFrUniDlciDcRemoteDna | 0 | 0 | This attribute specifies the Data Network Address (DNA) of the service at the remote end of the DLCI. This is the called (destina… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.5 | mscFrUniDlciDcRemoteDlci | 0 | 0 | This attribute specifies the remote DLCI of the PVC connection. |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.6 | mscFrUniDlciDcType | 0 | 0 | This attribute specifies the type of VC call. If the value is set to permanentMaster, then a permanent connection will be establ… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.10 | mscFrUniDlciDcDiscardPriority | 0 | 0 | This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning val… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.11 | mscFrUniDlciDcDeDiscardPriority | 0 | 0 | This attribute specifies whether the discardPriority applies to DE frames for this DLCI. When set to determinedByDiscardPriority… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.12 | mscFrUniDlciDcDataPath | 0 | 0 | This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in … |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.13 | mscFrUniDlciDcCugIndex | 0 | 0 | This attribute specifies the CUG index which is to be signalled in PVC and SPVC call requests to the remote end. The type of CUG… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.14 | mscFrUniDlciDcCugType | 0 | 0 | This attribute specifies the type of CUG signalling to be used in PVC and SPVC call requests. Index of CUG to be used is defined… |
| 1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.15 | mscFrUniDlciDcMapIpCosToFrQos | 0 | 0 | This attribute specifies whether an IP TOS value is mapped to an FR QOS. The mapping used is provisioned in the Mod Frs IpCosToFr… |