This is a 2 byte bit field reflecting the slots that
are part of the current active NDR Broadband Group 1. The
first 11 bits represent each of the slot numbers. If any of
the bits are set, those slots are currently part of the Group 1
N+1 Redundancy Group.
Parsed from file ERI-DNX-NEST-SYS-MIB.mib
Module: ERI-DNX-NEST-SYS-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-NEST-SYS-MIB
[Automatically extracted from oidview.com]
xNdrBroadbandGroup1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a 2 byte bit field reflecting the slots that are part of the current active NDR Broadband Group 1. The first 11 bits represent each of the slot numbers. If any of the bits are set, those slots are currently part of the Group 1 N+1 Redundancy Group." ::= { xNdrEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.11.3.1.1 | xNdrNestIndex | 0 | 0 | The nest index number in the node. Nests are indexed 0 through 7 but correspond to Nests 1 to 8. |
1.3.6.1.4.1.644.2.4.1.11.3.1.2 | xNdrState | 0 | 0 | This is the current N+1 Device Redundancy state. disabled (1) N+1 Redundancy disabled by the user. frozen (2) N+1 Redundan… |
1.3.6.1.4.1.644.2.4.1.11.3.1.3 | xNdrAutoSwitchover | 0 | 0 | Indicates the user's desired N+1 Device Redundancy automatic Switchover setting when a primary card fails. manual (0) F… |
1.3.6.1.4.1.644.2.4.1.11.3.1.4 | xNdrAutoRestore | 0 | 0 | Indicates the system's N+1 Device Redundancy automatic Restore setting when a protected card becomes operational. manual … |
1.3.6.1.4.1.644.2.4.1.11.3.1.6 | xNdrNarrowbandGroup | 0 | 0 | This is a 2 byte bit field reflecting the slots that are part of the current active NDR Narrowband Group. The first 11 bits repre… |
1.3.6.1.4.1.644.2.4.1.11.3.1.7 | xNdrBroadbandGroup1Protected | 0 | 0 | This is a slot number that indicates which device card from the active NDR Broadband Group 1 has been currently switched over. Va… |
1.3.6.1.4.1.644.2.4.1.11.3.1.8 | xNdrNarrowbandProtected | 0 | 0 | This is a slot number that indicates which device card from the active NDR Narrowband Group has been currently switched over. Val… |
1.3.6.1.4.1.644.2.4.1.11.3.1.9 | xNdrBroadbandGroup1Type | 0 | 0 | This indicates which type of device is currently occupying the status of active NDR Broadband Group 1. Only one type of broadband… |
1.3.6.1.4.1.644.2.4.1.11.3.1.10 | xNdrNarrowbandType | 0 | 0 | This indicates which type of device is currently occupying the status of active NDR Narrowband Group. Only one type of Narrowband… |
1.3.6.1.4.1.644.2.4.1.11.3.1.11 | xNdrDualBroadbandEnabled | 0 | 0 | Indicates the system's capability of supporting the N+1 Device Redundancy Dual Broadband Group functionality. The user should con… |
1.3.6.1.4.1.644.2.4.1.11.3.1.12 | xNdrBroadbandGroup2 | 0 | 0 | This is a 2 byte bit field reflecting the slots that are part of the current active NDR Broadband Group 2. The first 11 bits repr… |
1.3.6.1.4.1.644.2.4.1.11.3.1.13 | xNdrBroadbandGroup2Protected | 0 | 0 | This is a slot number that indicates which device card from the active NDR Broadband Group 2 has been currently switched over. Va… |
1.3.6.1.4.1.644.2.4.1.11.3.1.14 | xNdrBroadbandGroup2Type | 0 | 0 | This indicates which type of device is currently occupying the status of active NDR Broadband Group 2. Only one type of broadband… |
1.3.6.1.4.1.644.2.4.1.11.3.1.15 | xNdrPsxChassisType | 0 | 0 | This indicates which type of Protection Switch Chassis Hardware has been detected. In order to run with Dual Broadband Group con… |
1.3.6.1.4.1.644.2.4.1.11.3.1.16 | xNdrCmdStatus | 0 | 0 | The command status for this ndr configuration row/record. The value used in a SET will be replaced by a response value in the GET… |
1.3.6.1.4.1.644.2.4.1.11.3.1.17 | xNdrDualPowerSupply | 0 | 0 | The number of N+1 Protection Switch Power Supplies configured for the Nest. If running with only a single PSX Power Supply, this… |