This is a slot number that indicates which device card from
the active NDR Broadband Group 1 has been currently switched over.
Valid Protected slots for NDR Broadband Group1 are 8 through 10.
If a zero value is returned, no device card is currently protected.
Parsed from file ERI-DNX-NEST-SYS-MIB.mib
Module: ERI-DNX-NEST-SYS-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-NEST-SYS-MIB
[Automatically extracted from oidview.com]
xNdrBroadbandGroup1Protected OBJECT-TYPE SYNTAX Integer32 (0 | 8..10) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a slot number that indicates which device card from the active NDR Broadband Group 1 has been currently switched over. Valid Protected slots for NDR Broadband Group1 are 8 through 10. If a zero value is returned, no device card is currently protected." ::= { xNdrEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.11.3.1.1 | xNdrNestIndex | 0 | 0 | The nest index number in the node. Nests are indexed 0 through 7 but correspond to Nests 1 to 8. |
1.3.6.1.4.1.644.2.4.1.11.3.1.2 | xNdrState | 0 | 0 | This is the current N+1 Device Redundancy state. disabled (1) N+1 Redundancy disabled by the user. frozen (2) N+1 Redundan… |
1.3.6.1.4.1.644.2.4.1.11.3.1.3 | xNdrAutoSwitchover | 0 | 0 | Indicates the user's desired N+1 Device Redundancy automatic Switchover setting when a primary card fails. manual (0) F… |
1.3.6.1.4.1.644.2.4.1.11.3.1.4 | xNdrAutoRestore | 0 | 0 | Indicates the system's N+1 Device Redundancy automatic Restore setting when a protected card becomes operational. manual … |
1.3.6.1.4.1.644.2.4.1.11.3.1.5 | xNdrBroadbandGroup1 | 0 | 0 | This is a 2 byte bit field reflecting the slots that are part of the current active NDR Broadband Group 1. The first 11 bits repr… |
1.3.6.1.4.1.644.2.4.1.11.3.1.6 | xNdrNarrowbandGroup | 0 | 0 | This is a 2 byte bit field reflecting the slots that are part of the current active NDR Narrowband Group. The first 11 bits repre… |
1.3.6.1.4.1.644.2.4.1.11.3.1.8 | xNdrNarrowbandProtected | 0 | 0 | This is a slot number that indicates which device card from the active NDR Narrowband Group has been currently switched over. Val… |
1.3.6.1.4.1.644.2.4.1.11.3.1.9 | xNdrBroadbandGroup1Type | 0 | 0 | This indicates which type of device is currently occupying the status of active NDR Broadband Group 1. Only one type of broadband… |
1.3.6.1.4.1.644.2.4.1.11.3.1.10 | xNdrNarrowbandType | 0 | 0 | This indicates which type of device is currently occupying the status of active NDR Narrowband Group. Only one type of Narrowband… |
1.3.6.1.4.1.644.2.4.1.11.3.1.11 | xNdrDualBroadbandEnabled | 0 | 0 | Indicates the system's capability of supporting the N+1 Device Redundancy Dual Broadband Group functionality. The user should con… |
1.3.6.1.4.1.644.2.4.1.11.3.1.12 | xNdrBroadbandGroup2 | 0 | 0 | This is a 2 byte bit field reflecting the slots that are part of the current active NDR Broadband Group 2. The first 11 bits repr… |
1.3.6.1.4.1.644.2.4.1.11.3.1.13 | xNdrBroadbandGroup2Protected | 0 | 0 | This is a slot number that indicates which device card from the active NDR Broadband Group 2 has been currently switched over. Va… |
1.3.6.1.4.1.644.2.4.1.11.3.1.14 | xNdrBroadbandGroup2Type | 0 | 0 | This indicates which type of device is currently occupying the status of active NDR Broadband Group 2. Only one type of broadband… |
1.3.6.1.4.1.644.2.4.1.11.3.1.15 | xNdrPsxChassisType | 0 | 0 | This indicates which type of Protection Switch Chassis Hardware has been detected. In order to run with Dual Broadband Group con… |
1.3.6.1.4.1.644.2.4.1.11.3.1.16 | xNdrCmdStatus | 0 | 0 | The command status for this ndr configuration row/record. The value used in a SET will be replaced by a response value in the GET… |
1.3.6.1.4.1.644.2.4.1.11.3.1.17 | xNdrDualPowerSupply | 0 | 0 | The number of N+1 Protection Switch Power Supplies configured for the Nest. If running with only a single PSX Power Supply, this… |