This indicates which type of device is currently
occupying the status of active NDR Broadband Group 1.
Only one type of broadband device can be supported
by N+1 Redundancy at one time. Whichever type is
selected as the active Broadband Group 1 type should
match the device type of the card in Slot 11, which is
the designated Broadband Group 1 NDR Redundant slot.
Parsed from file ERI-DNX-NEST-SYS-MIB.mib
Module: ERI-DNX-NEST-SYS-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-NEST-SYS-MIB
[Automatically extracted from oidview.com]
xNdrBroadbandGroup1Type OBJECT-TYPE SYNTAX INTEGER { ds3 (8), sts1 (18), hds3 (21), e3 (31) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates which type of device is currently occupying the status of active NDR Broadband Group 1. Only one type of broadband device can be supported by N+1 Redundancy at one time. Whichever type is selected as the active Broadband Group 1 type should match the device type of the card in Slot 11, which is the designated Broadband Group 1 NDR Redundant slot." ::= { xNdrEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.11.3.1.1 | xNdrNestIndex | 0 | 0 | The nest index number in the node. Nests are indexed 0 through 7 but correspond to Nests 1 to 8. |
1.3.6.1.4.1.644.2.4.1.11.3.1.2 | xNdrState | 0 | 0 | This is the current N+1 Device Redundancy state. disabled (1) N+1 Redundancy disabled by the user. frozen (2) N+1 Redundan… |
1.3.6.1.4.1.644.2.4.1.11.3.1.3 | xNdrAutoSwitchover | 0 | 0 | Indicates the user's desired N+1 Device Redundancy automatic Switchover setting when a primary card fails. manual (0) F… |
1.3.6.1.4.1.644.2.4.1.11.3.1.4 | xNdrAutoRestore | 0 | 0 | Indicates the system's N+1 Device Redundancy automatic Restore setting when a protected card becomes operational. manual … |
1.3.6.1.4.1.644.2.4.1.11.3.1.5 | xNdrBroadbandGroup1 | 0 | 0 | This is a 2 byte bit field reflecting the slots that are part of the current active NDR Broadband Group 1. The first 11 bits repr… |
1.3.6.1.4.1.644.2.4.1.11.3.1.6 | xNdrNarrowbandGroup | 0 | 0 | This is a 2 byte bit field reflecting the slots that are part of the current active NDR Narrowband Group. The first 11 bits repre… |
1.3.6.1.4.1.644.2.4.1.11.3.1.7 | xNdrBroadbandGroup1Protected | 0 | 0 | This is a slot number that indicates which device card from the active NDR Broadband Group 1 has been currently switched over. Va… |
1.3.6.1.4.1.644.2.4.1.11.3.1.8 | xNdrNarrowbandProtected | 0 | 0 | This is a slot number that indicates which device card from the active NDR Narrowband Group has been currently switched over. Val… |
1.3.6.1.4.1.644.2.4.1.11.3.1.10 | xNdrNarrowbandType | 0 | 0 | This indicates which type of device is currently occupying the status of active NDR Narrowband Group. Only one type of Narrowband… |
1.3.6.1.4.1.644.2.4.1.11.3.1.11 | xNdrDualBroadbandEnabled | 0 | 0 | Indicates the system's capability of supporting the N+1 Device Redundancy Dual Broadband Group functionality. The user should con… |
1.3.6.1.4.1.644.2.4.1.11.3.1.12 | xNdrBroadbandGroup2 | 0 | 0 | This is a 2 byte bit field reflecting the slots that are part of the current active NDR Broadband Group 2. The first 11 bits repr… |
1.3.6.1.4.1.644.2.4.1.11.3.1.13 | xNdrBroadbandGroup2Protected | 0 | 0 | This is a slot number that indicates which device card from the active NDR Broadband Group 2 has been currently switched over. Va… |
1.3.6.1.4.1.644.2.4.1.11.3.1.14 | xNdrBroadbandGroup2Type | 0 | 0 | This indicates which type of device is currently occupying the status of active NDR Broadband Group 2. Only one type of broadband… |
1.3.6.1.4.1.644.2.4.1.11.3.1.15 | xNdrPsxChassisType | 0 | 0 | This indicates which type of Protection Switch Chassis Hardware has been detected. In order to run with Dual Broadband Group con… |
1.3.6.1.4.1.644.2.4.1.11.3.1.16 | xNdrCmdStatus | 0 | 0 | The command status for this ndr configuration row/record. The value used in a SET will be replaced by a response value in the GET… |
1.3.6.1.4.1.644.2.4.1.11.3.1.17 | xNdrDualPowerSupply | 0 | 0 | The number of N+1 Protection Switch Power Supplies configured for the Nest. If running with only a single PSX Power Supply, this… |