This item indicates how trunk processing will be
initiated towards the channel units in the ACT bank
in response to a DS1 alarm. This item changes based
on the cross-connect matrix configuration.
'liuA' indicates that all connected digroup channels
connected to DS1 Line A and are configured as full
transparent connections. For an alarm on DS1 Line A
the normal bank facilities for trunk conditioning and
CGA code insertion will be used.
'liuB' indicates that all connected digroup channels
connected to DS1 Line B and are configured as full
transparent connections. For an alarm on DS1 Line B
the normal bank facilities for trunk conditioning and
CGA code insertion will be used.
'dax' indicates a cross connect matrix configuration
other than that for 'liuA' or 'liuB'. The ACT DAX will
initiate trunk processing toward all the DS0 channels
in the digroup on a channel by channel basis.
Parsed from file ACTDAXL3.MIB.txt
Company: cai
Module: ADTRAN-ACTDAXL3-MIB
Vendor: Adtran
Module: ADTRAN-ACTDAXL3-MIB
[Automatically extracted from oidview.com]
adDAX3trunkProcessMode OBJECT-TYPE SYNTAX INTEGER { dax(1), liuA(2), liuB(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This item indicates how trunk processing will be initiated towards the channel units in the ACT bank in response to a DS1 alarm. This item changes based on the cross-connect matrix configuration. 'liuA' indicates that all connected digroup channels connected to DS1 Line A and are configured as full transparent connections. For an alarm on DS1 Line A the normal bank facilities for trunk conditioning and CGA code insertion will be used. 'liuB' indicates that all connected digroup channels connected to DS1 Line B and are configured as full transparent connections. For an alarm on DS1 Line B the normal bank facilities for trunk conditioning and CGA code insertion will be used. 'dax' indicates a cross connect matrix configuration other than that for 'liuA' or 'liuB'. The ACT DAX will initiate trunk processing toward all the DS0 channels in the digroup on a channel by channel basis." ::= { adDAX3config 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.2.9.2.15.0 | adDAX3trunkProcessMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.2.9.2.1 | adDAX3password | 1 | 1 | The password string used for authentication of SNMP messages between Proxy Agent and ACTDAX. Maximum of 12 characters. The fact… |
| 1.3.6.1.4.1.664.2.9.2.2 | adDAX3deviceAddress | 1 | 1 | The device address for this ACTDAX. The device address is used to access the device from the proxy agent. |
| 1.3.6.1.4.1.664.2.9.2.3 | adDAX3time | 1 | 1 | The current ACTDAX time value. A sequence of ASCII characters encoded as HH:MM:SS. For example, 1:15 pm is 13:15:00. |
| 1.3.6.1.4.1.664.2.9.2.4 | adDAX3date | 1 | 1 | The current ACTDAX date value. A sequence of ASCII characters encoded as MM/DD/YY. For example, April 28, 1994 is 04/28/94. |
| 1.3.6.1.4.1.664.2.9.2.5 | adDAX3resetPM | 1 | 1 | Resets Performance Monitor DS1 statistic counters in ACTDAX. Parameter value 1 resets all lines, 2 resets line 1 (DS1-A), 3 rese… |
| 1.3.6.1.4.1.664.2.9.2.6 | adDAX3auditProgCode | 1 | 1 | A Get performs an audit of the units Program Code and returns the result as PASS or FAIL. |
| 1.3.6.1.4.1.664.2.9.2.7 | adDAX3selfTestAndRestart | 1 | 1 | adDAX3selftestAndRestart |
| 1.3.6.1.4.1.664.2.9.2.8 | adDAX3resetFactoryConfig | 1 | 1 | A Set resets ALL provisioning to the factory defaults. |
| 1.3.6.1.4.1.664.2.9.2.9 | adDAX3primaryTiming | 1 | 1 | The Primary Facility Timing for the ACT 1241 and the ACTDAX. The timing set on the ACT OIU must match the timing set on the ACT … |
| 1.3.6.1.4.1.664.2.9.2.10 | adDAX3backupTiming | 1 | 1 | The Backup Facility Timing for the ACT 1241 and the ACTDAX. The backup timing is only used if the adDAX3primaryTiming is either … |
| 1.3.6.1.4.1.664.2.9.2.11 | adDAX3ds1AlineEqlz | 1 | 1 | The DS1 Line A transmit pre-equalizer circuitry provisioning for conditioning the T1 output signal for connection to a CSU, other… |
| 1.3.6.1.4.1.664.2.9.2.12 | adDAX3ds1BlineEqlz | 1 | 1 | The DS1 Line B transmit pre-equalizer circuitry provisioning for conditioning the T1 output signal for connection to a CSU, other… |
| 1.3.6.1.4.1.664.2.9.2.13 | adDAX3ds1Aoperation | 1 | 1 | The DS1 Line A Operational Status. 'disabled' turns off the faceplate indicators for DS1 A, disables EASY-MENU alarmsfor DS1 A, a… |
| 1.3.6.1.4.1.664.2.9.2.14 | adDAX3ds1Boperation | 1 | 1 | The DS1 Line B Operational Status. 'disabled' turns off the faceplate indicators for DS1 B, disables EASY-MENU alarmsfor DS1 B, a… |
| 1.3.6.1.4.1.664.2.9.2.16 | adDAX3remPortBaudRate | 1 | 1 | The ACTDAX Remote Port Baud Rate. Changing the remote port buad rate WILL TERMINATE communications to this device at the current… |
| 1.3.6.1.4.1.664.2.9.2.17 | adDAX3remPortProtocol | 1 | 1 | The ACTDAX Remote Port Protocol. |
| 1.3.6.1.4.1.664.2.9.2.18 | adDAX3remPortConnect | 1 | 1 | The ACTDAX Remote Port Connection Type. Changing the connection type may disrupt communication to this device. 'direct' indicates… |
| 1.3.6.1.4.1.664.2.9.2.19 | adDAX3phone | 1 | 1 | The dialing sequence (phone number) to reach the network manager. Maximum of 35 characters. |
| 1.3.6.1.4.1.664.2.9.2.20 | adDAX3mdmInitCmd | 1 | 1 | The modem initialization command string. The initialization string will be sent to the modem on unit power-up, before a call is … |
| 1.3.6.1.4.1.664.2.9.2.21 | adDAX3mdmDialCmd | 1 | 1 | The modem dialing command string. The dialing command will be sent to the modem before the phone number. Maximum of 15 characte… |
| 1.3.6.1.4.1.664.2.9.2.22 | adDAX3mdmDialCmdSfx | 1 | 1 | The modem dialing command suffix. The dialing command suffix will be sent to the modem after the phone number. Maximum of 5 cha… |
| 1.3.6.1.4.1.664.2.9.2.23 | adDAX3mdmHangUpCmd | 1 | 1 | The modem hang-up command. The hang-up command will be sent to the modem to hang-up the line. Maximum of 15 characters. Any co… |
| 1.3.6.1.4.1.664.2.9.2.24 | adDAX3mdmInit | 1 | 1 | A Set will send the modem initialization string to the modem connected to the remote port. This WILL DISRUPT communications to th… |
| 1.3.6.1.4.1.664.2.9.2.25 | adDAX3daisyChain | 1 | 1 | Disable/Enable the Local Rear Panel Port of the ACTDAX for Daisy Chain operation. 'off' indicates that the Local Rear Panel Port w… |