Resets Performance Monitor DS1 statistic counters
in ACTDAX. Parameter value 1 resets all lines,
2 resets line 1 (DS1-A), 3 resets line 2 (DS1-B).
Parsed from file ACTDAXL3.MIB.txt
Company: cai
Module: ADTRAN-ACTDAXL3-MIB
Vendor: Adtran
Module: ADTRAN-ACTDAXL3-MIB
[Automatically extracted from oidview.com]
adDAX3resetPM OBJECT-TYPE SYNTAX INTEGER { resAll(1), resDS1A(2), resDS1B(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Resets Performance Monitor DS1 statistic counters in ACTDAX. Parameter value 1 resets all lines, 2 resets line 1 (DS1-A), 3 resets line 2 (DS1-B)." ::= { adDAX3config 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.664.2.9.2.5.0 | adDAX3resetPM | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.664.2.9.2.1 | adDAX3password | 1 | 1 | The password string used for authentication of SNMP messages between Proxy Agent and ACTDAX. Maximum of 12 characters. The fact… |
1.3.6.1.4.1.664.2.9.2.2 | adDAX3deviceAddress | 1 | 1 | The device address for this ACTDAX. The device address is used to access the device from the proxy agent. |
1.3.6.1.4.1.664.2.9.2.3 | adDAX3time | 1 | 1 | The current ACTDAX time value. A sequence of ASCII characters encoded as HH:MM:SS. For example, 1:15 pm is 13:15:00. |
1.3.6.1.4.1.664.2.9.2.4 | adDAX3date | 1 | 1 | The current ACTDAX date value. A sequence of ASCII characters encoded as MM/DD/YY. For example, April 28, 1994 is 04/28/94. |
1.3.6.1.4.1.664.2.9.2.6 | adDAX3auditProgCode | 1 | 1 | A Get performs an audit of the units Program Code and returns the result as PASS or FAIL. |
1.3.6.1.4.1.664.2.9.2.7 | adDAX3selfTestAndRestart | 1 | 1 | adDAX3selftestAndRestart |
1.3.6.1.4.1.664.2.9.2.8 | adDAX3resetFactoryConfig | 1 | 1 | A Set resets ALL provisioning to the factory defaults. |
1.3.6.1.4.1.664.2.9.2.9 | adDAX3primaryTiming | 1 | 1 | The Primary Facility Timing for the ACT 1241 and the ACTDAX. The timing set on the ACT OIU must match the timing set on the ACT … |
1.3.6.1.4.1.664.2.9.2.10 | adDAX3backupTiming | 1 | 1 | The Backup Facility Timing for the ACT 1241 and the ACTDAX. The backup timing is only used if the adDAX3primaryTiming is either … |
1.3.6.1.4.1.664.2.9.2.11 | adDAX3ds1AlineEqlz | 1 | 1 | The DS1 Line A transmit pre-equalizer circuitry provisioning for conditioning the T1 output signal for connection to a CSU, other… |
1.3.6.1.4.1.664.2.9.2.12 | adDAX3ds1BlineEqlz | 1 | 1 | The DS1 Line B transmit pre-equalizer circuitry provisioning for conditioning the T1 output signal for connection to a CSU, other… |
1.3.6.1.4.1.664.2.9.2.13 | adDAX3ds1Aoperation | 1 | 1 | The DS1 Line A Operational Status. 'disabled' turns off the faceplate indicators for DS1 A, disables EASY-MENU alarmsfor DS1 A, a… |
1.3.6.1.4.1.664.2.9.2.14 | adDAX3ds1Boperation | 1 | 1 | The DS1 Line B Operational Status. 'disabled' turns off the faceplate indicators for DS1 B, disables EASY-MENU alarmsfor DS1 B, a… |
1.3.6.1.4.1.664.2.9.2.15 | adDAX3trunkProcessMode | 1 | 1 | This item indicates how trunk processing will be initiated towards the channel units in the ACT bank in response to a DS1 alarm. … |
1.3.6.1.4.1.664.2.9.2.16 | adDAX3remPortBaudRate | 1 | 1 | The ACTDAX Remote Port Baud Rate. Changing the remote port buad rate WILL TERMINATE communications to this device at the current… |
1.3.6.1.4.1.664.2.9.2.17 | adDAX3remPortProtocol | 1 | 1 | The ACTDAX Remote Port Protocol. |
1.3.6.1.4.1.664.2.9.2.18 | adDAX3remPortConnect | 1 | 1 | The ACTDAX Remote Port Connection Type. Changing the connection type may disrupt communication to this device. 'direct' indicates… |
1.3.6.1.4.1.664.2.9.2.19 | adDAX3phone | 1 | 1 | The dialing sequence (phone number) to reach the network manager. Maximum of 35 characters. |
1.3.6.1.4.1.664.2.9.2.20 | adDAX3mdmInitCmd | 1 | 1 | The modem initialization command string. The initialization string will be sent to the modem on unit power-up, before a call is … |
1.3.6.1.4.1.664.2.9.2.21 | adDAX3mdmDialCmd | 1 | 1 | The modem dialing command string. The dialing command will be sent to the modem before the phone number. Maximum of 15 characte… |
1.3.6.1.4.1.664.2.9.2.22 | adDAX3mdmDialCmdSfx | 1 | 1 | The modem dialing command suffix. The dialing command suffix will be sent to the modem after the phone number. Maximum of 5 cha… |
1.3.6.1.4.1.664.2.9.2.23 | adDAX3mdmHangUpCmd | 1 | 1 | The modem hang-up command. The hang-up command will be sent to the modem to hang-up the line. Maximum of 15 characters. Any co… |
1.3.6.1.4.1.664.2.9.2.24 | adDAX3mdmInit | 1 | 1 | A Set will send the modem initialization string to the modem connected to the remote port. This WILL DISRUPT communications to th… |
1.3.6.1.4.1.664.2.9.2.25 | adDAX3daisyChain | 1 | 1 | Disable/Enable the Local Rear Panel Port of the ACTDAX for Daisy Chain operation. 'off' indicates that the Local Rear Panel Port w… |