Disable/Enable the Local Rear Panel Port of the
ACTDAX for Daisy Chain operation.
'off' indicates that the Local Rear Panel Port
will run the EASYMENU terminal interface.
'on' indicates that the Local Rear Panel Port
can be connected to the remote port of the next
unit downstream from the proxy agent.
Parsed from file ACTDAXL3.MIB.txt
Company: cai
Module: ADTRAN-ACTDAXL3-MIB
Vendor: Adtran
Module: ADTRAN-ACTDAXL3-MIB
[Automatically extracted from oidview.com]
adDAX3daisyChain OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Disable/Enable the Local Rear Panel Port of the ACTDAX for Daisy Chain operation. 'off' indicates that the Local Rear Panel Port will run the EASYMENU terminal interface. 'on' indicates that the Local Rear Panel Port can be connected to the remote port of the next unit downstream from the proxy agent." ::= { adDAX3config 25 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.664.2.9.2.25.0 | adDAX3daisyChain | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.664.2.9.2.1 | adDAX3password | 1 | 1 | The password string used for authentication of SNMP messages between Proxy Agent and ACTDAX. Maximum of 12 characters. The fact… |
1.3.6.1.4.1.664.2.9.2.2 | adDAX3deviceAddress | 1 | 1 | The device address for this ACTDAX. The device address is used to access the device from the proxy agent. |
1.3.6.1.4.1.664.2.9.2.3 | adDAX3time | 1 | 1 | The current ACTDAX time value. A sequence of ASCII characters encoded as HH:MM:SS. For example, 1:15 pm is 13:15:00. |
1.3.6.1.4.1.664.2.9.2.4 | adDAX3date | 1 | 1 | The current ACTDAX date value. A sequence of ASCII characters encoded as MM/DD/YY. For example, April 28, 1994 is 04/28/94. |
1.3.6.1.4.1.664.2.9.2.5 | adDAX3resetPM | 1 | 1 | Resets Performance Monitor DS1 statistic counters in ACTDAX. Parameter value 1 resets all lines, 2 resets line 1 (DS1-A), 3 rese… |
1.3.6.1.4.1.664.2.9.2.6 | adDAX3auditProgCode | 1 | 1 | A Get performs an audit of the units Program Code and returns the result as PASS or FAIL. |
1.3.6.1.4.1.664.2.9.2.7 | adDAX3selfTestAndRestart | 1 | 1 | adDAX3selftestAndRestart |
1.3.6.1.4.1.664.2.9.2.8 | adDAX3resetFactoryConfig | 1 | 1 | A Set resets ALL provisioning to the factory defaults. |
1.3.6.1.4.1.664.2.9.2.9 | adDAX3primaryTiming | 1 | 1 | The Primary Facility Timing for the ACT 1241 and the ACTDAX. The timing set on the ACT OIU must match the timing set on the ACT … |
1.3.6.1.4.1.664.2.9.2.10 | adDAX3backupTiming | 1 | 1 | The Backup Facility Timing for the ACT 1241 and the ACTDAX. The backup timing is only used if the adDAX3primaryTiming is either … |
1.3.6.1.4.1.664.2.9.2.11 | adDAX3ds1AlineEqlz | 1 | 1 | The DS1 Line A transmit pre-equalizer circuitry provisioning for conditioning the T1 output signal for connection to a CSU, other… |
1.3.6.1.4.1.664.2.9.2.12 | adDAX3ds1BlineEqlz | 1 | 1 | The DS1 Line B transmit pre-equalizer circuitry provisioning for conditioning the T1 output signal for connection to a CSU, other… |
1.3.6.1.4.1.664.2.9.2.13 | adDAX3ds1Aoperation | 1 | 1 | The DS1 Line A Operational Status. 'disabled' turns off the faceplate indicators for DS1 A, disables EASY-MENU alarmsfor DS1 A, a… |
1.3.6.1.4.1.664.2.9.2.14 | adDAX3ds1Boperation | 1 | 1 | The DS1 Line B Operational Status. 'disabled' turns off the faceplate indicators for DS1 B, disables EASY-MENU alarmsfor DS1 B, a… |
1.3.6.1.4.1.664.2.9.2.15 | adDAX3trunkProcessMode | 1 | 1 | This item indicates how trunk processing will be initiated towards the channel units in the ACT bank in response to a DS1 alarm. … |
1.3.6.1.4.1.664.2.9.2.16 | adDAX3remPortBaudRate | 1 | 1 | The ACTDAX Remote Port Baud Rate. Changing the remote port buad rate WILL TERMINATE communications to this device at the current… |
1.3.6.1.4.1.664.2.9.2.17 | adDAX3remPortProtocol | 1 | 1 | The ACTDAX Remote Port Protocol. |
1.3.6.1.4.1.664.2.9.2.18 | adDAX3remPortConnect | 1 | 1 | The ACTDAX Remote Port Connection Type. Changing the connection type may disrupt communication to this device. 'direct' indicates… |
1.3.6.1.4.1.664.2.9.2.19 | adDAX3phone | 1 | 1 | The dialing sequence (phone number) to reach the network manager. Maximum of 35 characters. |
1.3.6.1.4.1.664.2.9.2.20 | adDAX3mdmInitCmd | 1 | 1 | The modem initialization command string. The initialization string will be sent to the modem on unit power-up, before a call is … |
1.3.6.1.4.1.664.2.9.2.21 | adDAX3mdmDialCmd | 1 | 1 | The modem dialing command string. The dialing command will be sent to the modem before the phone number. Maximum of 15 characte… |
1.3.6.1.4.1.664.2.9.2.22 | adDAX3mdmDialCmdSfx | 1 | 1 | The modem dialing command suffix. The dialing command suffix will be sent to the modem after the phone number. Maximum of 5 cha… |
1.3.6.1.4.1.664.2.9.2.23 | adDAX3mdmHangUpCmd | 1 | 1 | The modem hang-up command. The hang-up command will be sent to the modem to hang-up the line. Maximum of 15 characters. Any co… |
1.3.6.1.4.1.664.2.9.2.24 | adDAX3mdmInit | 1 | 1 | A Set will send the modem initialization string to the modem connected to the remote port. This WILL DISRUPT communications to th… |