This is the ifIndex value of the corresponding
ifEntry. See comments above.
This is the ifIndex value of the corresponding
ifEntry. See comments above.
Parsed from file LS2020-R2-MIB.my.txt
Company: None
Module: LIGHTSTREAM-MIB
This is the ifIndex value of the corresponding
ifEntry. See comments above.
Parsed from file LIGHTSTREAM-MIB.mib
Module: LIGHTSTREAM-MIB
clc1InfoIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex value of the corresponding ifEntry. See comments above." ::= { clc1InfoEntry 1 }
Vendor: Cisco Systems
Module: LIGHTSTREAM-MIB (LS2020-R2-MIB.my)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
clc1InfoIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex value of the corresponding ifEntry. See comments above." ::= { clc1InfoEntry 1 }
clc1InfoIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex value of the corresponding ifEntry. See comments above." ::= { clc1InfoEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.711.2.1.4.4.1.4 | clc1InfoOperProtocol | 0 | 0 | Operational higher level protocol stack to support on this port. |
1.3.6.1.4.1.711.2.1.4.4.1.5 | clc1InfoAdminProtocol | 0 | 0 | Administratively desired higher level protocol stack to support on this port. |
1.3.6.1.4.1.711.2.1.4.4.1.6 | clc1InfoOperLoopMode | 0 | 0 | Operational loop mode for this port: none, internal, or external. |
1.3.6.1.4.1.711.2.1.4.4.1.7 | clc1InfoAdminLoopMode | 0 | 0 | Administrative or desired loop mode for this port: none, internal, or external. |
1.3.6.1.4.1.711.2.1.4.4.1.10 | clc1InfoOperControlBandwidthSize | 0 | 0 | The current operation value of the control bandwidth size for this port. This is a scaling factor. This value is multiplied by … |
1.3.6.1.4.1.711.2.1.4.4.1.11 | clc1InfoAdminControlBandwidthSize | 0 | 0 | The current administratively desired value of the control bandwidth size for this port. Setting the trigger variable clc1InfoAdim… |
1.3.6.1.4.1.711.2.1.4.4.1.12 | clc1InfoOperDataBandwidthSize | 0 | 0 | The current operation value of the data bandwidth size for this port. This is a scaling factor. This value is multiplied by the… |
1.3.6.1.4.1.711.2.1.4.4.1.13 | clc1InfoAdminDataBandwidthSize | 0 | 0 | The current administratively desired value of the data bandwidth size for this port. Setting the trigger variable clc1InfoAdimOpe… |
1.3.6.1.4.1.711.2.1.4.4.1.14 | clc1InfoLcAutoEnable | 0 | 0 | State of the LC auto-enable flag for this port. If enabled the port will be enable at LC boot time. If disabled the port will re… |
1.3.6.1.4.1.711.2.1.4.4.1.15 | clc1InfoLcDebugLevel | 0 | 0 | Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl. |
1.3.6.1.4.1.711.2.1.4.4.1.16 | clc1InfoOperScramble | 0 | 0 | Operational value for Cell Payload scrambling used for this port. |
1.3.6.1.4.1.711.2.1.4.4.1.17 | clc1InfoAdminScramble | 0 | 0 | Administrative value for Cell Payload scrambling used for this port. Setting the trigger variable clc1InfoAdimOperTrigger will c… |
1.3.6.1.4.1.711.2.1.4.4.1.18 | clc1InfoDataCellCapacity | 0 | 0 | The portion of this port's capacity in cells that is allocated for data traffic. |
1.3.6.1.4.1.711.2.1.4.4.1.19 | clc1InfoDataCellAvailable | 0 | 0 | The portion of this port's capacity in cells that is available for data traffic. This variable is adjusted for the bandwidth con… |
1.3.6.1.4.1.711.2.1.4.4.1.20 | clc1InfoLinkUtilization | 0 | 0 | This is an estimated utilization on the link. |
1.3.6.1.4.1.711.2.1.4.4.1.21 | clc1InfoOperClock | 0 | 0 | Operational value for the source of transmit clock for this port. |
1.3.6.1.4.1.711.2.1.4.4.1.22 | clc1InfoAdminClock | 0 | 0 | Administrative value for the source of transmit clock used for this port. Setting the trigger variable clc1InfoAdimOperTrigger w… |
1.3.6.1.4.1.711.2.1.4.4.1.99 | clc1InfoAdminOperTrigger | 0 | 0 | When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects… |