Value of the LC debug level variable for this port.
This parameter is set in the LC EEPROM by portctl.
Value of the LC debug level variable for this port.
This parameter is set in the LC EEPROM by portctl.
Parsed from file LS2020-R2-MIB.my.txt
Company: None
Module: LIGHTSTREAM-MIB
Value of the LC debug level variable for this port.
This parameter is set in the LC EEPROM by portctl.
Parsed from file LIGHTSTREAM-MIB.mib
Module: LIGHTSTREAM-MIB
clc1InfoLcDebugLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl." ::= { clc1InfoEntry 15 }
Vendor: Cisco Systems
Module: LIGHTSTREAM-MIB (LS2020-R2-MIB.my)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
clc1InfoLcDebugLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl." ::= { clc1InfoEntry 15 }
clc1InfoLcDebugLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl." ::= { clc1InfoEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.711.2.1.4.4.1.1 | clc1InfoIfIndex | 0 | 0 | This is the ifIndex value of the corresponding ifEntry. See comments above. |
1.3.6.1.4.1.711.2.1.4.4.1.4 | clc1InfoOperProtocol | 0 | 0 | Operational higher level protocol stack to support on this port. |
1.3.6.1.4.1.711.2.1.4.4.1.5 | clc1InfoAdminProtocol | 0 | 0 | Administratively desired higher level protocol stack to support on this port. |
1.3.6.1.4.1.711.2.1.4.4.1.6 | clc1InfoOperLoopMode | 0 | 0 | Operational loop mode for this port: none, internal, or external. |
1.3.6.1.4.1.711.2.1.4.4.1.7 | clc1InfoAdminLoopMode | 0 | 0 | Administrative or desired loop mode for this port: none, internal, or external. |
1.3.6.1.4.1.711.2.1.4.4.1.10 | clc1InfoOperControlBandwidthSize | 0 | 0 | The current operation value of the control bandwidth size for this port. This is a scaling factor. This value is multiplied by … |
1.3.6.1.4.1.711.2.1.4.4.1.11 | clc1InfoAdminControlBandwidthSize | 0 | 0 | The current administratively desired value of the control bandwidth size for this port. Setting the trigger variable clc1InfoAdim… |
1.3.6.1.4.1.711.2.1.4.4.1.12 | clc1InfoOperDataBandwidthSize | 0 | 0 | The current operation value of the data bandwidth size for this port. This is a scaling factor. This value is multiplied by the… |
1.3.6.1.4.1.711.2.1.4.4.1.13 | clc1InfoAdminDataBandwidthSize | 0 | 0 | The current administratively desired value of the data bandwidth size for this port. Setting the trigger variable clc1InfoAdimOpe… |
1.3.6.1.4.1.711.2.1.4.4.1.14 | clc1InfoLcAutoEnable | 0 | 0 | State of the LC auto-enable flag for this port. If enabled the port will be enable at LC boot time. If disabled the port will re… |
1.3.6.1.4.1.711.2.1.4.4.1.16 | clc1InfoOperScramble | 0 | 0 | Operational value for Cell Payload scrambling used for this port. |
1.3.6.1.4.1.711.2.1.4.4.1.17 | clc1InfoAdminScramble | 0 | 0 | Administrative value for Cell Payload scrambling used for this port. Setting the trigger variable clc1InfoAdimOperTrigger will c… |
1.3.6.1.4.1.711.2.1.4.4.1.18 | clc1InfoDataCellCapacity | 0 | 0 | The portion of this port's capacity in cells that is allocated for data traffic. |
1.3.6.1.4.1.711.2.1.4.4.1.19 | clc1InfoDataCellAvailable | 0 | 0 | The portion of this port's capacity in cells that is available for data traffic. This variable is adjusted for the bandwidth con… |
1.3.6.1.4.1.711.2.1.4.4.1.20 | clc1InfoLinkUtilization | 0 | 0 | This is an estimated utilization on the link. |
1.3.6.1.4.1.711.2.1.4.4.1.21 | clc1InfoOperClock | 0 | 0 | Operational value for the source of transmit clock for this port. |
1.3.6.1.4.1.711.2.1.4.4.1.22 | clc1InfoAdminClock | 0 | 0 | Administrative value for the source of transmit clock used for this port. Setting the trigger variable clc1InfoAdimOperTrigger w… |
1.3.6.1.4.1.711.2.1.4.4.1.99 | clc1InfoAdminOperTrigger | 0 | 0 | When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects… |