When set to FLASH, the main functional status indicator, an
LED labelled Rack Status will flash at a slow rate (about 30
times per minute). This object allows a management station
to mark an arbitrary card and is intended to facilitate
servicing operations (although the significance of the
flashing LED is at the discretion of the management station
operator). Flashing applies to all LED colors (red, amber,
and green) and does not stop the LED from changing color.
This object is reset to NOFLASH after an agent reset.
Parsed from file ncr-mib.txt
Company: None
Module: RH-ATT-MIB
When set to FLASH, the main functional status indicator, an
LED labelled Rack Status will flash at a slow rate (about 30
times per minute). This object allows a management station
to mark an arbitrary card and is intended to facilitate
servicing operations (although the significance of the
flashing LED is at the discretion of the management station
operator). Flashing applies to all LED colors (red, amber,
and green) and does not stop the LED from changing color.
This object is reset to NOFLASH after an agent reset.
Parsed from file RH-ATT-MIB.mib
Module: RH-ATT-MIB
Vendor: AT&T
Module: RH-ATT-MIB
[Automatically extracted from oidview.com]
rh1EnhCtrlFlashRackStatusLED OBJECT-TYPE SYNTAX INTEGER { other (1), noflash (2), flash (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to FLASH, the main functional status indicator, an LED labelled Rack Status will flash at a slow rate (about 30 times per minute). This object allows a management station to mark an arbitrary card and is intended to facilitate servicing operations (although the significance of the flashing LED is at the discretion of the management station operator). Flashing applies to all LED colors (red, amber, and green) and does not stop the LED from changing color. This object is reset to NOFLASH after an agent reset." ::= { rh1EnhCtrlCapability 14 }
rh1EnhCtrlFlashRackStatusLED OBJECT-TYPE SYNTAX INTEGER { other (1), noflash (2), flash (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to FLASH, the main functional status indicator, an LED labelled Rack Status will flash at a slow rate (about 30 times per minute). This object allows a management station to mark an arbitrary card and is intended to facilitate servicing operations (although the significance of the flashing LED is at the discretion of the management station operator). Flashing applies to all LED colors (red, amber, and green) and does not stop the LED from changing color. This object is reset to NOFLASH after an agent reset." ::= { rh1EnhCtrlCapability 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.74.2.14.6.14.0 | rh1EnhCtrlFlashRackStatusLED | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.74.2.14.6.1 | rh1EnhCtrlResetRackConfig | 1 | 1 | This action resets all configuration data to be equal to the factory default values stored in firmware. This action also causes … |
1.3.6.1.4.1.74.2.14.6.2 | rh1EnhCtrlRackVersion | 1 | 1 | The hardware release number for the rack which is made up of slot 0, and the backplane. The numbers are in the format x backplan… |
1.3.6.1.4.1.74.2.14.6.3 | rh1EnhCtrlPowerTable | 1 | 3 | Information about the two power supply 'slots' |
1.3.6.1.4.1.74.2.14.6.4 | rh1EnhCtrlCardMap | 1 | 1 | A string of bits which reflects the current configuration of units which are viewed by group managed objects. In each bit positi… |
1.3.6.1.4.1.74.2.14.6.5 | rh1EnhCtrlRackMap | 1 | 1 | The card type for each card in the rack, contained in one string. For each card (not including slot 0), there are 5 octets which… |
1.3.6.1.4.1.74.2.14.6.6 | rh1EnhCtrlRackmaster | 1 | 1 | An index (rh1EnhCrlCardID) to the current rack master. |
1.3.6.1.4.1.74.2.14.6.7 | rh1EnhCtrlLastRackmaster | 1 | 1 | An index (rh1EnhCrlCardID) to the last rack master. A non zero value here means that since the last reset, a card successfully b… |
1.3.6.1.4.1.74.2.14.6.8 | rh1EnhCtrlGatewayIpAddr | 1 | 1 | The IP address of a gateway server to which all IP packets will be sent whose destination network is not the local network. |
1.3.6.1.4.1.74.2.14.6.9 | rh1EnhCtrlNetworkMask | 1 | 1 | The subnet mask that is used in the comparison of the hub IP address to the destination IP address to determine whether or not th… |
1.3.6.1.4.1.74.2.14.6.10 | rh1EnhCtrlRackIpAddr | 1 | 1 | The rackmaster's IP address. This object's value is the IP address in dot notation. |
1.3.6.1.4.1.74.2.14.6.11 | rh1EnhCtrlRs232State | 1 | 1 | Indicates whether the RS-232 port is active (i.e., something connected) and if active, whether the user is currently logged in. |
1.3.6.1.4.1.74.2.14.6.12 | rh1EnhCtrlRs232DataRate | 1 | 1 | Indicates the data rate the RS-232 port is set at. |
1.3.6.1.4.1.74.2.14.6.13 | rh1EnhCtrlTrapCountPeriodCtrl | 1 | 1 | The transmission period (seconds) of the Trap(count) packet. The valid range of timer values is 1 through 3,600 (1 hour). A value… |
1.3.6.1.4.1.74.2.14.6.15 | rh1EnhCtrlSendTrapConfig | 1 | 1 | Writing (2) causes the trap(config) packet to be sent. |
1.3.6.1.4.1.74.2.14.6.16 | rh1EnhCtrlMngrTable | 1 | 4 | A list of addresses for multiple management station which get traps. |
1.3.6.1.4.1.74.2.14.6.17 | rh1EnhCtrlCardTable | 1 | 8 | A list of enhanced control entries. |
1.3.6.1.4.1.74.2.14.6.18 | rh1EnhCtrlPortTable | 1 | 8 | A list of Enhanced control entries. |
1.3.6.1.4.1.74.2.14.6.19 | rh1EnhCtrlPAPortCtrl | 1 | 1 | The administrator settable state of the Private Administration port. Indicates whether the port has been administratively disable… |
1.3.6.1.4.1.74.2.14.6.20 | rh1EnhCtrlPALinkIntegrityState | 1 | 1 | Indicates whether the link is good or not. This value is valid even if the port is disabled. |
1.3.6.1.4.1.74.2.14.6.21 | rh1EnhCtrlSegmentTable | 1 | 3 | None |
1.3.6.1.4.1.74.2.14.6.22 | rh1EnhCtrlConfigResetHub | 1 | 1 | This action resets the Hub level configuration data to be equal to the factory default values stored in the firmware. These value… |
1.3.6.1.4.1.74.2.14.6.23 | rh1EnhCtrlSegmentMap | 1 | 1 | This bit string indicates which segments have MPR card present. Only segments with MPR cards attached have valid statistics avai… |