The subnet mask that is used in the comparison of the hub IP
address to the destination IP address to determine whether
or not the destination IP address is on the local
subnetwork. If it is not, and if a gateway IP address has
been administered, then the gateway will be used to deliver
the packet.
Although this object is registered in the AT&T proprietary
object space, it is the same as the RFC 1066 object:
ipAdEntNetMask. The standard object is not implemented since
the entire 'ip' group cannot be implemented at this time.
Parsed from file ncr-mib.txt
Company: None
Module: RH-ATT-MIB
The subnet mask that is used in the comparison of the hub IP
address to the destination IP address to determine whether
or not the destination IP address is on the local
subnetwork. If it is not, and if a gateway IP address has
been administered, then the gateway will be used to deliver
the packet.
Although this object is registered in the AT&T proprietary
object space, it is the same as the RFC 1066 object:
ipAdEntNetMask. The standard object is not implemented since
the entire 'ip' group cannot be implemented at this time.
Parsed from file RH-ATT-MIB.mib
Module: RH-ATT-MIB
Vendor: AT&T
Module: RH-ATT-MIB
[Automatically extracted from oidview.com]
rh1EnhCtrlNetworkMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask that is used in the comparison of the hub IP address to the destination IP address to determine whether or not the destination IP address is on the local subnetwork. If it is not, and if a gateway IP address has been administered, then the gateway will be used to deliver the packet. Although this object is registered in the AT&T proprietary object space, it is the same as the RFC 1066 object: ipAdEntNetMask. The standard object is not implemented since the entire 'ip' group cannot be implemented at this time." ::= { rh1EnhCtrlCapability 9 }
rh1EnhCtrlNetworkMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask that is used in the comparison of the hub IP address to the destination IP address to determine whether or not the destination IP address is on the local subnetwork. If it is not, and if a gateway IP address has been administered, then the gateway will be used to deliver the packet. Although this object is registered in the AT&T proprietary object space, it is the same as the RFC 1066 object: ipAdEntNetMask. The standard object is not implemented since the entire 'ip' group cannot be implemented at this time." ::= { rh1EnhCtrlCapability 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.74.2.14.6.9.0 | rh1EnhCtrlNetworkMask | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.74.2.14.6.1 | rh1EnhCtrlResetRackConfig | 1 | 1 | This action resets all configuration data to be equal to the factory default values stored in firmware. This action also causes … |
1.3.6.1.4.1.74.2.14.6.2 | rh1EnhCtrlRackVersion | 1 | 1 | The hardware release number for the rack which is made up of slot 0, and the backplane. The numbers are in the format x backplan… |
1.3.6.1.4.1.74.2.14.6.3 | rh1EnhCtrlPowerTable | 1 | 3 | Information about the two power supply 'slots' |
1.3.6.1.4.1.74.2.14.6.4 | rh1EnhCtrlCardMap | 1 | 1 | A string of bits which reflects the current configuration of units which are viewed by group managed objects. In each bit positi… |
1.3.6.1.4.1.74.2.14.6.5 | rh1EnhCtrlRackMap | 1 | 1 | The card type for each card in the rack, contained in one string. For each card (not including slot 0), there are 5 octets which… |
1.3.6.1.4.1.74.2.14.6.6 | rh1EnhCtrlRackmaster | 1 | 1 | An index (rh1EnhCrlCardID) to the current rack master. |
1.3.6.1.4.1.74.2.14.6.7 | rh1EnhCtrlLastRackmaster | 1 | 1 | An index (rh1EnhCrlCardID) to the last rack master. A non zero value here means that since the last reset, a card successfully b… |
1.3.6.1.4.1.74.2.14.6.8 | rh1EnhCtrlGatewayIpAddr | 1 | 1 | The IP address of a gateway server to which all IP packets will be sent whose destination network is not the local network. |
1.3.6.1.4.1.74.2.14.6.10 | rh1EnhCtrlRackIpAddr | 1 | 1 | The rackmaster's IP address. This object's value is the IP address in dot notation. |
1.3.6.1.4.1.74.2.14.6.11 | rh1EnhCtrlRs232State | 1 | 1 | Indicates whether the RS-232 port is active (i.e., something connected) and if active, whether the user is currently logged in. |
1.3.6.1.4.1.74.2.14.6.12 | rh1EnhCtrlRs232DataRate | 1 | 1 | Indicates the data rate the RS-232 port is set at. |
1.3.6.1.4.1.74.2.14.6.13 | rh1EnhCtrlTrapCountPeriodCtrl | 1 | 1 | The transmission period (seconds) of the Trap(count) packet. The valid range of timer values is 1 through 3,600 (1 hour). A value… |
1.3.6.1.4.1.74.2.14.6.14 | rh1EnhCtrlFlashRackStatusLED | 1 | 1 | When set to FLASH, the main functional status indicator, an LED labelled Rack Status will flash at a slow rate (about 30 times pe… |
1.3.6.1.4.1.74.2.14.6.15 | rh1EnhCtrlSendTrapConfig | 1 | 1 | Writing (2) causes the trap(config) packet to be sent. |
1.3.6.1.4.1.74.2.14.6.16 | rh1EnhCtrlMngrTable | 1 | 4 | A list of addresses for multiple management station which get traps. |
1.3.6.1.4.1.74.2.14.6.17 | rh1EnhCtrlCardTable | 1 | 8 | A list of enhanced control entries. |
1.3.6.1.4.1.74.2.14.6.18 | rh1EnhCtrlPortTable | 1 | 8 | A list of Enhanced control entries. |
1.3.6.1.4.1.74.2.14.6.19 | rh1EnhCtrlPAPortCtrl | 1 | 1 | The administrator settable state of the Private Administration port. Indicates whether the port has been administratively disable… |
1.3.6.1.4.1.74.2.14.6.20 | rh1EnhCtrlPALinkIntegrityState | 1 | 1 | Indicates whether the link is good or not. This value is valid even if the port is disabled. |
1.3.6.1.4.1.74.2.14.6.21 | rh1EnhCtrlSegmentTable | 1 | 3 | None |
1.3.6.1.4.1.74.2.14.6.22 | rh1EnhCtrlConfigResetHub | 1 | 1 | This action resets the Hub level configuration data to be equal to the factory default values stored in the firmware. These value… |
1.3.6.1.4.1.74.2.14.6.23 | rh1EnhCtrlSegmentMap | 1 | 1 | This bit string indicates which segments have MPR card present. Only segments with MPR cards attached have valid statistics avai… |