This action resets the Hub level configuration data to be
equal to the factory default values stored in the firmware.
These values are: Hub IP address, Trap IP addresses,
Gateway IP address, Network mask, Trap MAC addresses, Count
trap period, RS232 data rate, and Inband sets. This action
also causes a rack reset.
Parsed from file ncr-mib.txt
Company: None
Module: RH-ATT-MIB
This action resets the Hub level configuration data to be
equal to the factory default values stored in the firmware.
These values are: Hub IP address, Trap IP addresses,
Gateway IP address, Network mask, Trap MAC addresses, Count
trap period, RS232 data rate, and Inband sets. This action
also causes a rack reset.
Parsed from file RH-ATT-MIB.mib
Module: RH-ATT-MIB
Vendor: AT&T
Module: RH-ATT-MIB
[Automatically extracted from oidview.com]
rh1EnhCtrlConfigResetHub OBJECT-TYPE SYNTAX INTEGER { no-reset(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This action resets the Hub level configuration data to be equal to the factory default values stored in the firmware. These values are: Hub IP address, Trap IP addresses, Gateway IP address, Network mask, Trap MAC addresses, Count trap period, RS232 data rate, and Inband sets. This action also causes a rack reset." ::= { rh1EnhCtrlCapability 22 }
rh1EnhCtrlConfigResetHub OBJECT-TYPE SYNTAX INTEGER { no-reset(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This action resets the Hub level configuration data to be equal to the factory default values stored in the firmware. These values are: Hub IP address, Trap IP addresses, Gateway IP address, Network mask, Trap MAC addresses, Count trap period, RS232 data rate, and Inband sets. This action also causes a rack reset." ::= { rh1EnhCtrlCapability 22 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.74.2.14.6.22.0 | rh1EnhCtrlConfigResetHub | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.74.2.14.6.1 | rh1EnhCtrlResetRackConfig | 1 | 1 | This action resets all configuration data to be equal to the factory default values stored in firmware. This action also causes … |
1.3.6.1.4.1.74.2.14.6.2 | rh1EnhCtrlRackVersion | 1 | 1 | The hardware release number for the rack which is made up of slot 0, and the backplane. The numbers are in the format x backplan… |
1.3.6.1.4.1.74.2.14.6.3 | rh1EnhCtrlPowerTable | 1 | 3 | Information about the two power supply 'slots' |
1.3.6.1.4.1.74.2.14.6.4 | rh1EnhCtrlCardMap | 1 | 1 | A string of bits which reflects the current configuration of units which are viewed by group managed objects. In each bit positi… |
1.3.6.1.4.1.74.2.14.6.5 | rh1EnhCtrlRackMap | 1 | 1 | The card type for each card in the rack, contained in one string. For each card (not including slot 0), there are 5 octets which… |
1.3.6.1.4.1.74.2.14.6.6 | rh1EnhCtrlRackmaster | 1 | 1 | An index (rh1EnhCrlCardID) to the current rack master. |
1.3.6.1.4.1.74.2.14.6.7 | rh1EnhCtrlLastRackmaster | 1 | 1 | An index (rh1EnhCrlCardID) to the last rack master. A non zero value here means that since the last reset, a card successfully b… |
1.3.6.1.4.1.74.2.14.6.8 | rh1EnhCtrlGatewayIpAddr | 1 | 1 | The IP address of a gateway server to which all IP packets will be sent whose destination network is not the local network. |
1.3.6.1.4.1.74.2.14.6.9 | rh1EnhCtrlNetworkMask | 1 | 1 | The subnet mask that is used in the comparison of the hub IP address to the destination IP address to determine whether or not th… |
1.3.6.1.4.1.74.2.14.6.10 | rh1EnhCtrlRackIpAddr | 1 | 1 | The rackmaster's IP address. This object's value is the IP address in dot notation. |
1.3.6.1.4.1.74.2.14.6.11 | rh1EnhCtrlRs232State | 1 | 1 | Indicates whether the RS-232 port is active (i.e., something connected) and if active, whether the user is currently logged in. |
1.3.6.1.4.1.74.2.14.6.12 | rh1EnhCtrlRs232DataRate | 1 | 1 | Indicates the data rate the RS-232 port is set at. |
1.3.6.1.4.1.74.2.14.6.13 | rh1EnhCtrlTrapCountPeriodCtrl | 1 | 1 | The transmission period (seconds) of the Trap(count) packet. The valid range of timer values is 1 through 3,600 (1 hour). A value… |
1.3.6.1.4.1.74.2.14.6.14 | rh1EnhCtrlFlashRackStatusLED | 1 | 1 | When set to FLASH, the main functional status indicator, an LED labelled Rack Status will flash at a slow rate (about 30 times pe… |
1.3.6.1.4.1.74.2.14.6.15 | rh1EnhCtrlSendTrapConfig | 1 | 1 | Writing (2) causes the trap(config) packet to be sent. |
1.3.6.1.4.1.74.2.14.6.16 | rh1EnhCtrlMngrTable | 1 | 4 | A list of addresses for multiple management station which get traps. |
1.3.6.1.4.1.74.2.14.6.17 | rh1EnhCtrlCardTable | 1 | 8 | A list of enhanced control entries. |
1.3.6.1.4.1.74.2.14.6.18 | rh1EnhCtrlPortTable | 1 | 8 | A list of Enhanced control entries. |
1.3.6.1.4.1.74.2.14.6.19 | rh1EnhCtrlPAPortCtrl | 1 | 1 | The administrator settable state of the Private Administration port. Indicates whether the port has been administratively disable… |
1.3.6.1.4.1.74.2.14.6.20 | rh1EnhCtrlPALinkIntegrityState | 1 | 1 | Indicates whether the link is good or not. This value is valid even if the port is disabled. |
1.3.6.1.4.1.74.2.14.6.21 | rh1EnhCtrlSegmentTable | 1 | 3 | None |
1.3.6.1.4.1.74.2.14.6.23 | rh1EnhCtrlSegmentMap | 1 | 1 | This bit string indicates which segments have MPR card present. Only segments with MPR cards attached have valid statistics avai… |