If the port type is if-group, this field shows the distribution
function of the port. This function is used to pick the forwarding
port for a packet. It can be either mac(0), ip(1), or sequential(2).
The mac function selects the port based on the hash of the MAC
address of the destination. Instead of MAC address, the ip function
uses the destination's IP address. The sequential function uses
the round-robin port selection.
Parsed from file netapp_2_2_2.mib.txt
Company: netapp
Module: NETAPP-MIB
Vendor: Network Appliance
Module: NETAPP-MIB (netapp_2_2_2.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
netportIfgDistrFunc OBJECT-TYPE SYNTAX INTEGER { mac(0), ip(1), sequential(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "If the port type is if-group, this field shows the distribution function of the port. This function is used to pick the forwarding port for a packet. It can be either mac(0), ip(1), or sequential(2). The mac function selects the port based on the hash of the MAC address of the destination. Instead of MAC address, the ip function uses the destination's IP address. The sequential function uses the round-robin port selection." ::= { netportEntry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.789.1.22.2.1.1 | netportNode | 0 | 0 | Node where the port belongs to. |
| 1.3.6.1.4.1.789.1.22.2.1.2 | netportPort | 0 | 0 | Port identity. |
| 1.3.6.1.4.1.789.1.22.2.1.3 | netportRole | 0 | 0 | Role of the port. A port must have one of the following roles: cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or… |
| 1.3.6.1.4.1.789.1.22.2.1.4 | netportLinkState | 0 | 0 | The link-state of the port. Normally it is either UP(2) or DOWN(3). |
| 1.3.6.1.4.1.789.1.22.2.1.5 | netportMtu | 0 | 0 | The Maximum Transmission Unit (MTU) refers to the size (in bytes) of the largest packet that is supported by the port. |
| 1.3.6.1.4.1.789.1.22.2.1.6 | netportAutonegAdmin | 0 | 0 | Indicates whether the port's auto-negotiation property is enabled by an administrator. |
| 1.3.6.1.4.1.789.1.22.2.1.7 | netportAutonegOper | 0 | 0 | Indicates whether the auto-negotiation is enabled on the port. |
| 1.3.6.1.4.1.789.1.22.2.1.8 | netportDuplexAdmin | 0 | 0 | The duplex mode of the port set by the administrator. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3). |
| 1.3.6.1.4.1.789.1.22.2.1.9 | netportDuplexOper | 0 | 0 | The duplex mode appears on the port. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3). |
| 1.3.6.1.4.1.789.1.22.2.1.10 | netportSpeedAdmin | 0 | 0 | The speed of the port set by an adminstrator. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or … |
| 1.3.6.1.4.1.789.1.22.2.1.11 | netportSpeedOper | 0 | 0 | The speed appears on the port. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5). |
| 1.3.6.1.4.1.789.1.22.2.1.12 | netportSpeed | 0 | 0 | The speed that appears in the port scaled to megabits/sec. |
| 1.3.6.1.4.1.789.1.22.2.1.13 | netportMac | 0 | 0 | The port's MAC address |
| 1.3.6.1.4.1.789.1.22.2.1.14 | netportUpAdmin | 0 | 0 | Indicates whether the port status is set 'UP' by an adminstrator. |
| 1.3.6.1.4.1.789.1.22.2.1.15 | netportType | 0 | 0 | The type of the port which can be either physical(0), if-group(1), vlan(2) or undef(3). |
| 1.3.6.1.4.1.789.1.22.2.1.16 | netportIfgNode | 0 | 0 | This field shows the if-group node name if the port type is if-group, It show an empty string, otherwise. |
| 1.3.6.1.4.1.789.1.22.2.1.17 | netportIfgPort | 0 | 0 | This field shows the if-group port if the port type is if-group, It show an empty string, otherwise. |
| 1.3.6.1.4.1.789.1.22.2.1.19 | netportIfgMode | 0 | 0 | If the port type is if-group, this field shows the if-group's policy. It can be either multimode(0), multimode-lacp(1), or single… |
| 1.3.6.1.4.1.789.1.22.2.1.20 | netportVlanNode | 0 | 0 | If the port type is vlan, this field shows its vlan node. Otherwise, it shows an empty string. |
| 1.3.6.1.4.1.789.1.22.2.1.21 | netportVlanPort | 0 | 0 | If the port type is vlan, this field shows its vlan port. Otherwise, it shows an empty string. |
| 1.3.6.1.4.1.789.1.22.2.1.22 | netportVlanTag | 0 | 0 | If the port type is vlan, this field shows its vlan tag. Otherwise, it shows an empty string. |
| 1.3.6.1.4.1.789.1.22.2.1.23 | netportFlowcontrolAdmin | 0 | 0 | The flowcontrol of the port set by an adminstrator. It can be either undef(0), none(1), receive(2), send(3), or full(4). |
| 1.3.6.1.4.1.789.1.22.2.1.24 | netportFlowcontrolOper | 0 | 0 | The flowcontrol that appears on the port. It can be either undef(0), none(1), receive(2), send(3), or full(4). |
| 1.3.6.1.4.1.789.1.22.2.1.25 | netportAutorevertDelay | 0 | 0 | If the port is designated as a cluster port, this field shows the delay in seconds before autoreverting a LIF to this port. other… |