Role of the port. A port must have one of the following roles:
cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or undef(0).
The cluster port is used to communicate to other node(s) in
the cluster. The data port services clients' requests. It is where
all the file requests come in. The management port is used
by administrator to manage resources within a node.
The intercluster port is used to communicate to other cluser.
The cluster-mgmt port is used to manage resources within the cluster.
The undef role is for the port that has not yet been assigned a role.
Parsed from file netapp_2_2_2.mib.txt
Company: netapp
Module: NETAPP-MIB
Vendor: Network Appliance
Module: NETAPP-MIB (netapp_2_2_2.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
netportRole OBJECT-TYPE SYNTAX INTEGER { undef(0), cluster(1), data(2), node-mgmt(3), intercluster(4), cluster-mgmt(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Role of the port. A port must have one of the following roles: cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or undef(0). The cluster port is used to communicate to other node(s) in the cluster. The data port services clients' requests. It is where all the file requests come in. The management port is used by administrator to manage resources within a node. The intercluster port is used to communicate to other cluser. The cluster-mgmt port is used to manage resources within the cluster. The undef role is for the port that has not yet been assigned a role." ::= { netportEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.789.1.22.2.1.1 | netportNode | 0 | 0 | Node where the port belongs to. |
1.3.6.1.4.1.789.1.22.2.1.2 | netportPort | 0 | 0 | Port identity. |
1.3.6.1.4.1.789.1.22.2.1.4 | netportLinkState | 0 | 0 | The link-state of the port. Normally it is either UP(2) or DOWN(3). |
1.3.6.1.4.1.789.1.22.2.1.5 | netportMtu | 0 | 0 | The Maximum Transmission Unit (MTU) refers to the size (in bytes) of the largest packet that is supported by the port. |
1.3.6.1.4.1.789.1.22.2.1.6 | netportAutonegAdmin | 0 | 0 | Indicates whether the port's auto-negotiation property is enabled by an administrator. |
1.3.6.1.4.1.789.1.22.2.1.7 | netportAutonegOper | 0 | 0 | Indicates whether the auto-negotiation is enabled on the port. |
1.3.6.1.4.1.789.1.22.2.1.8 | netportDuplexAdmin | 0 | 0 | The duplex mode of the port set by the administrator. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3). |
1.3.6.1.4.1.789.1.22.2.1.9 | netportDuplexOper | 0 | 0 | The duplex mode appears on the port. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3). |
1.3.6.1.4.1.789.1.22.2.1.10 | netportSpeedAdmin | 0 | 0 | The speed of the port set by an adminstrator. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or … |
1.3.6.1.4.1.789.1.22.2.1.11 | netportSpeedOper | 0 | 0 | The speed appears on the port. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5). |
1.3.6.1.4.1.789.1.22.2.1.12 | netportSpeed | 0 | 0 | The speed that appears in the port scaled to megabits/sec. |
1.3.6.1.4.1.789.1.22.2.1.13 | netportMac | 0 | 0 | The port's MAC address |
1.3.6.1.4.1.789.1.22.2.1.14 | netportUpAdmin | 0 | 0 | Indicates whether the port status is set 'UP' by an adminstrator. |
1.3.6.1.4.1.789.1.22.2.1.15 | netportType | 0 | 0 | The type of the port which can be either physical(0), if-group(1), vlan(2) or undef(3). |
1.3.6.1.4.1.789.1.22.2.1.16 | netportIfgNode | 0 | 0 | This field shows the if-group node name if the port type is if-group, It show an empty string, otherwise. |
1.3.6.1.4.1.789.1.22.2.1.17 | netportIfgPort | 0 | 0 | This field shows the if-group port if the port type is if-group, It show an empty string, otherwise. |
1.3.6.1.4.1.789.1.22.2.1.18 | netportIfgDistrFunc | 0 | 0 | If the port type is if-group, this field shows the distribution function of the port. This function is used to pick the forwardi… |
1.3.6.1.4.1.789.1.22.2.1.19 | netportIfgMode | 0 | 0 | If the port type is if-group, this field shows the if-group's policy. It can be either multimode(0), multimode-lacp(1), or single… |
1.3.6.1.4.1.789.1.22.2.1.20 | netportVlanNode | 0 | 0 | If the port type is vlan, this field shows its vlan node. Otherwise, it shows an empty string. |
1.3.6.1.4.1.789.1.22.2.1.21 | netportVlanPort | 0 | 0 | If the port type is vlan, this field shows its vlan port. Otherwise, it shows an empty string. |
1.3.6.1.4.1.789.1.22.2.1.22 | netportVlanTag | 0 | 0 | If the port type is vlan, this field shows its vlan tag. Otherwise, it shows an empty string. |
1.3.6.1.4.1.789.1.22.2.1.23 | netportFlowcontrolAdmin | 0 | 0 | The flowcontrol of the port set by an adminstrator. It can be either undef(0), none(1), receive(2), send(3), or full(4). |
1.3.6.1.4.1.789.1.22.2.1.24 | netportFlowcontrolOper | 0 | 0 | The flowcontrol that appears on the port. It can be either undef(0), none(1), receive(2), send(3), or full(4). |
1.3.6.1.4.1.789.1.22.2.1.25 | netportAutorevertDelay | 0 | 0 | If the port is designated as a cluster port, this field shows the delay in seconds before autoreverting a LIF to this port. other… |