Vendor: IMV Victron bv
Module: GE_PARALLELUPS
[Automatically extracted from oidview.com]
upsConfig_fourth OBJECT IDENTIFIER ::= { geFourthUPS 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.818.1.1.14.9.1 | upsConfigInputVoltage_fourth | 1 | 1 | The magnitude of the nominal input voltage. On those systems which support read-write access to this object, if there is an atte… |
| 1.3.6.1.4.1.818.1.1.14.9.2 | upsConfigInputFreq_fourth | 1 | 1 | The nominal input frequency. On those systems which support read-write access to this object, if there is an attempt to set this… |
| 1.3.6.1.4.1.818.1.1.14.9.3 | upsConfigOutputVoltage_fourth | 1 | 1 | The magnitude of the nominal output voltage. On those systems which support read-write access to this object, if there is an att… |
| 1.3.6.1.4.1.818.1.1.14.9.4 | upsConfigOutputFreq_fourth | 1 | 1 | The nominal output frequency. On those systems which support read-write access to this object, if there is an attempt to set thi… |
| 1.3.6.1.4.1.818.1.1.14.9.5 | upsConfigOutputVA_fourth | 1 | 1 | The magnitude of the nominal Volt-Amp rating.(*) |
| 1.3.6.1.4.1.818.1.1.14.9.6 | upsConfigOutputPower_fourth | 1 | 1 | The magnitude of the nominal true power rating.(*) |
| 1.3.6.1.4.1.818.1.1.14.9.7 | upsConfigLowBattTime_fourth | 1 | 1 | The value of upsEstimatedMinutesRemaining at which a lowBattery condition is declared. For agents which support only discrete (d… |
| 1.3.6.1.4.1.818.1.1.14.9.8 | upsConfigAudibleStatus_fourth | 1 | 1 | The requested state of the audible alarm. When in the disabled state, the audible alarm should never sound. The enabled state i… |
| 1.3.6.1.4.1.818.1.1.14.9.9 | upsConfigLowVoltageTransferPoint_fourth | 1 | 1 | The minimum input line voltage allowed before the UPS system transfers to battery backup.(*) |
| 1.3.6.1.4.1.818.1.1.14.9.10 | upsConfigHighVoltageTransferPoint_fourth | 1 | 1 | The maximum line voltage allowed before the UPS system transfers to battery backup.(*) |
| 1.3.6.1.4.1.818.1.1.14.9.11 | upsConfigBatteryCapacity_fourth | 1 | 1 | The installed battery capacity. This value is the 'factory'-value, not the value after calibration. |
| 1.3.6.1.4.1.818.1.1.14.9.12 | upsConfigBatteryChargeCurrent_fourth | 1 | 1 | The maximum battery charge current, including external chargers. |
| 1.3.6.1.4.1.818.1.1.14.9.13 | upsConfigNoLoadShutdown_fourth | 1 | 1 | Dis- or enable 'no load' shutdown from the contact interface. |
| 1.3.6.1.4.1.818.1.1.14.9.14 | upsConfigStartDelay_fourth | 1 | 1 | Minimum required autonomy time before the UPS may perform an autorestart. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.818.1.1.14.1 | upsIdent_fourth | 9 | 18 | None |
| 1.3.6.1.4.1.818.1.1.14.2 | upsBattery_fourth | 7 | 14 | None |
| 1.3.6.1.4.1.818.1.1.14.3 | upsInput_fourth | 3 | 13 | None |
| 1.3.6.1.4.1.818.1.1.14.4 | upsOutput_fourth | 4 | 13 | None |
| 1.3.6.1.4.1.818.1.1.14.5 | upsBypass_fourth | 3 | 10 | None |
| 1.3.6.1.4.1.818.1.1.14.6 | upsAlarm_fourth | 4 | 35 | None |
| 1.3.6.1.4.1.818.1.1.14.7 | upsTest_fourth | 7 | 18 | None |
| 1.3.6.1.4.1.818.1.1.14.8 | upsControl_fourth | 13 | 28 | None |
| 1.3.6.1.4.1.818.1.1.14.10 | upsGetSet_fourth | 24 | 54 | None |
| 1.3.6.1.4.1.818.1.1.14.11 | geUPSTraps_fourth | 51 | 51 | None |