The value of this object specifies the behaviour
of the equipment with respect to the outgoing
facility markers. The authorized values are :
noCheck : no checking,
remove : the markers are not transmitted,
check : according to the following table :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| packet | facility marker |
| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | 0000 (1) | 00FF (2) | 000F (3) |
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call |no checking |clearing (5)|no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call | | | |
|connected|clearing (4)|no checking |no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| clear | - | - |no checking|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) : registration codes,
non-x25 facilities provided by the
network in case of intranetwork calls,
non-x25 facilities provided by the
network to which the calling DTE is
connected in case of internetwork
calls
(2) : non-x25 facilities provided by the
network to which the calling DTE is
connected in case of intranetwork
calls
(3) : CCITT-specified DTE facilities
(4) : diagnostic to local equipment = 03 42,
diagnostic to remote equipment = 11 42
(5) : diagnostic to local equipment = 03 42
The default value is 'noCheck'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object specifies the behaviour
of the equipment with respect to the outgoing
facility markers. The authorized values are :
noCheck : no checking,
remove : the markers are not transmitted,
check : according to the following table :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| packet | facility marker |
| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | 0000 (1) | 00FF (2) | 000F (3) |
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call |no checking |clearing (5)|no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call | | | |
|connected|clearing (4)|no checking |no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| clear | - | - |no checking|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) : registration codes,
non-x25 facilities provided by the
network in case of intranetwork calls,
non-x25 facilities provided by the
network to which the calling DTE is
connected in case of internetwork
calls
(2) : non-x25 facilities provided by the
network to which the calling DTE is
connected in case of intranetwork
calls
(3) : CCITT-specified DTE facilities
(4) : diagnostic to local equipment = 03 42,
diagnostic to remote equipment = 11 42
(5) : diagnostic to local equipment = 03 42
The default value is 'noCheck'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclX25CfaFacOutputMarkers OBJECT-TYPE SYNTAX INTEGER { noCheck(1), check(2), remove(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object specifies the behaviour of the equipment with respect to the outgoing facility markers. The authorized values are : noCheck : no checking, remove : the markers are not transmitted, check : according to the following table : ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | packet | facility marker | | |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | 0000 (1) | 00FF (2) | 000F (3) | |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | call |no checking |clearing (5)|no checking| |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | call | | | | |connected|clearing (4)|no checking |no checking| |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | clear | - | - |no checking| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (1) : registration codes, non-x25 facilities provided by the network in case of intranetwork calls, non-x25 facilities provided by the network to which the calling DTE is connected in case of internetwork calls (2) : non-x25 facilities provided by the network to which the calling DTE is connected in case of intranetwork calls (3) : CCITT-specified DTE facilities (4) : diagnostic to local equipment = 03 42, diagnostic to remote equipment = 11 42 (5) : diagnostic to local equipment = 03 42 The default value is 'noCheck'." ::= { fclX25CfaFacilityEntry 7 }
fclX25CfaFacOutputMarkers OBJECT-TYPE SYNTAX INTEGER { noCheck(1), check(2), remove(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object specifies the behaviour of the equipment with respect to the outgoing facility markers. The authorized values are : noCheck : no checking, remove : the markers are not transmitted, check : according to the following table : ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | packet | facility marker | | |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | 0000 (1) | 00FF (2) | 000F (3) | |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | call |no checking |clearing (5)|no checking| |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | call | | | | |connected|clearing (4)|no checking |no checking| |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | clear | - | - |no checking| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (1) : registration codes, non-x25 facilities provided by the network in case of intranetwork calls, non-x25 facilities provided by the network to which the calling DTE is connected in case of internetwork calls (2) : non-x25 facilities provided by the network to which the calling DTE is connected in case of intranetwork calls (3) : CCITT-specified DTE facilities (4) : diagnostic to local equipment = 03 42, diagnostic to remote equipment = 11 42 (5) : diagnostic to local equipment = 03 42 The default value is 'noCheck'." ::= { fclX25CfaFacilityEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.20.50.1.20.1.1 | fclX25CfaFacConfigId | 0 | 0 | The value of this object identifies one and only one X25 access configuration. The possible values are : '0..199. If it is unused… |
1.3.6.1.4.1.866.20.1.20.50.1.20.1.2 | fclX25CfaFacClosedUserGroup | 0 | 0 | The value of this object specifies the behaviour of the equipment with respect to the Closed User Group (CUG) facility. There are… |
1.3.6.1.4.1.866.20.1.20.50.1.20.1.5 | fclX25CfaFacReverseCharging | 0 | 0 | The value of this object specifies the behaviour of the equipment with respect to the reverse charging facility. If the called su… |
1.3.6.1.4.1.866.20.1.20.50.1.20.1.6 | fclX25CfaFacTransitDelay | 0 | 0 | The value of this object specifies the behaviour of the equipment with respect to the transit delay facility. The authorized valu… |
1.3.6.1.4.1.866.20.1.20.50.1.20.1.8 | fclX25CfaFacInputMarkers | 0 | 0 | Marqueurs en reception |
1.3.6.1.4.1.866.20.1.20.50.1.20.1.10 | fclX25CfaFacOutputUnknownFacility | 0 | 0 | The value of this object specifies the behaviour of the equipment with respect to an outgoing unknown facility. The authorized va… |
1.3.6.1.4.1.866.20.1.20.50.1.20.1.11 | fclX25CfaFacInputUnknownFacility | 0 | 0 | The value of this object specifies the behaviour of the equipment with respect to an incoming unknown facility. The authorized va… |