The value of this object indicates the maximum
number (K) of sequentially numbered I frames that
the equipment may have outstanding (i.e..
unacknowledged) at any given time. The authorized
values are '1..127'. The default value is '10'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object indicates the maximum
number (K) of sequentially numbered I frames that
the equipment may have outstanding (i.e..
unacknowledged) at any given time. The authorized
values are '1..127'. The default value is '10'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fcwSRvcKWindowSize OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates the maximum number (K) of sequentially numbered I frames that the equipment may have outstanding (i.e.. unacknowledged) at any given time. The authorized values are '1..127'. The default value is '10'." ::= { fcwSerReliableVirtualCircuits 7 }
fcwSRvcKWindowSize OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates the maximum number (K) of sequentially numbered I frames that the equipment may have outstanding (i.e.. unacknowledged) at any given time. The authorized values are '1..127'. The default value is '10'." ::= { fcwSerReliableVirtualCircuits 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.25.70.2.7.0 | fcwSRvcKWindowSize | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.25.70.2.1 | fcwSRvcReliableVcCount | 1 | 1 | The value of this object defines the maximum number of simultaneously reliable virtual circuits in the equipment. The reliable vi… |
| 1.3.6.1.4.1.866.20.1.25.70.2.2 | fcwSRvcFirstDataPacketTimer | 1 | 1 | The value of this object is the waiting time between the call connected packet and the first data packet which there is clearing … |
| 1.3.6.1.4.1.866.20.1.25.70.2.3 | fcwSRvcRestoreOutgoingCallRetryCount | 1 | 1 | The value of this object indicates how many times the equipment will try to send a call packet to restore the virtual circuit wic… |
| 1.3.6.1.4.1.866.20.1.25.70.2.4 | fcwSRvcRestoreMinimumRecallTimer | 1 | 1 | The value of this object specifies the minimum recall time (in seconds) between two successive calls. The authorized values are '… |
| 1.3.6.1.4.1.866.20.1.25.70.2.5 | fcwSRvcRestoreIncomingCallTimer | 1 | 1 | The value of this object is the time between a new connection request and the reception of the corresponding call connected packe… |
| 1.3.6.1.4.1.866.20.1.25.70.2.6 | fcwSRvcRestoreOutgoingCallDelay | 1 | 1 | When it is not possible to restore the network connection, the standard forces to not use the called reference number during the … |
| 1.3.6.1.4.1.866.20.1.25.70.2.8 | fcwSRvcFastSelectUse | 1 | 1 | The value of this object specifies whether the equipment uses the fast select facility or not. The default value is 'onk'. |
| 1.3.6.1.4.1.866.20.1.25.70.2.9 | fcwSRvcOutputMarkers | 1 | 1 | The value of this object specifies the behaviour of the equipment with respect to the outgoing facility markers. The authorized v… |
| 1.3.6.1.4.1.866.20.1.25.70.2.10 | fcwSRvcConversionAimedPoint | 1 | 1 | The value of this object indicates whether the 'aimed point' address conversion is enabled or not. This conversion consists in ma… |
| 1.3.6.1.4.1.866.20.1.25.70.2.11 | fcwSRvcConversionIncomingCall | 1 | 1 | The value of this object indicates which address field are converted on an incoming call. The authorized values are : off : no add… |
| 1.3.6.1.4.1.866.20.1.25.70.2.12 | fcwSRvcConversionOutgoingCall | 1 | 1 | The value of this object indicates which address field are converted on an outgoing call. The authorized values are : off : no add… |
| 1.3.6.1.4.1.866.20.1.25.70.2.13 | fcwSRvcConversionAddressCheck | 1 | 1 | The value of this object indicates the behaviour of the equipment when a requested address conversion can not be made because the… |