The value of this object specifies the behaviour
of the equipment with respect to the outgoing
facility markers. The authorized values are :
noCheck : no checking,
remove : the markers are not transmitted,
check : according to the following table :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| packet | facility marker |
| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | 0000 (1) | 00FF (2) | 000F (3) |
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call |no checking |clearing (5)|no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call | | | |
|connected|clearing (4)|no checking |no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| clear | - | - |no checking|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) : registration codes,
non-x25 facilities provided by the
network in case of intranetwork calls,
non-x25 facilities provided by the
network to which the calling DTE is
connected in case of internetwork
calls
(2) : non-x25 facilities provided by the
network to which the calling DTE is
connected in case of intranetwork
calls
(3) : CCITT-specified DTE facilities
(4) : diagnostic to local equipment = 03 42,
diagnostic to remote equipment = 11 42
(5) : diagnostic to local equipment = 03 42
The default value is 'noCheck'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object specifies the behaviour
of the equipment with respect to the outgoing
facility markers. The authorized values are :
noCheck : no checking,
remove : the markers are not transmitted,
check : according to the following table :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| packet | facility marker |
| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | 0000 (1) | 00FF (2) | 000F (3) |
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call |no checking |clearing (5)|no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call | | | |
|connected|clearing (4)|no checking |no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| clear | - | - |no checking|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) : registration codes,
non-x25 facilities provided by the
network in case of intranetwork calls,
non-x25 facilities provided by the
network to which the calling DTE is
connected in case of internetwork
calls
(2) : non-x25 facilities provided by the
network to which the calling DTE is
connected in case of intranetwork
calls
(3) : CCITT-specified DTE facilities
(4) : diagnostic to local equipment = 03 42,
diagnostic to remote equipment = 11 42
(5) : diagnostic to local equipment = 03 42
The default value is 'noCheck'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fcwSRvcOutputMarkers OBJECT-TYPE SYNTAX INTEGER { noCheck(1), check(2), remove(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object specifies the behaviour of the equipment with respect to the outgoing facility markers. The authorized values are : noCheck : no checking, remove : the markers are not transmitted, check : according to the following table : ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | packet | facility marker | | |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | 0000 (1) | 00FF (2) | 000F (3) | |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | call |no checking |clearing (5)|no checking| |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | call | | | | |connected|clearing (4)|no checking |no checking| |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | clear | - | - |no checking| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (1) : registration codes, non-x25 facilities provided by the network in case of intranetwork calls, non-x25 facilities provided by the network to which the calling DTE is connected in case of internetwork calls (2) : non-x25 facilities provided by the network to which the calling DTE is connected in case of intranetwork calls (3) : CCITT-specified DTE facilities (4) : diagnostic to local equipment = 03 42, diagnostic to remote equipment = 11 42 (5) : diagnostic to local equipment = 03 42 The default value is 'noCheck'." ::= { fcwSerReliableVirtualCircuits 9 }
fcwSRvcOutputMarkers OBJECT-TYPE SYNTAX INTEGER { noCheck(1), check(2), remove(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object specifies the behaviour of the equipment with respect to the outgoing facility markers. The authorized values are : noCheck : no checking, remove : the markers are not transmitted, check : according to the following table : ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | packet | facility marker | | |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | 0000 (1) | 00FF (2) | 000F (3) | |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | call |no checking |clearing (5)|no checking| |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | call | | | | |connected|clearing (4)|no checking |no checking| |~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~| | clear | - | - |no checking| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (1) : registration codes, non-x25 facilities provided by the network in case of intranetwork calls, non-x25 facilities provided by the network to which the calling DTE is connected in case of internetwork calls (2) : non-x25 facilities provided by the network to which the calling DTE is connected in case of intranetwork calls (3) : CCITT-specified DTE facilities (4) : diagnostic to local equipment = 03 42, diagnostic to remote equipment = 11 42 (5) : diagnostic to local equipment = 03 42 The default value is 'noCheck'." ::= { fcwSerReliableVirtualCircuits 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.25.70.2.9.0 | fcwSRvcOutputMarkers | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.25.70.2.1 | fcwSRvcReliableVcCount | 1 | 1 | The value of this object defines the maximum number of simultaneously reliable virtual circuits in the equipment. The reliable vi… |
| 1.3.6.1.4.1.866.20.1.25.70.2.2 | fcwSRvcFirstDataPacketTimer | 1 | 1 | The value of this object is the waiting time between the call connected packet and the first data packet which there is clearing … |
| 1.3.6.1.4.1.866.20.1.25.70.2.3 | fcwSRvcRestoreOutgoingCallRetryCount | 1 | 1 | The value of this object indicates how many times the equipment will try to send a call packet to restore the virtual circuit wic… |
| 1.3.6.1.4.1.866.20.1.25.70.2.4 | fcwSRvcRestoreMinimumRecallTimer | 1 | 1 | The value of this object specifies the minimum recall time (in seconds) between two successive calls. The authorized values are '… |
| 1.3.6.1.4.1.866.20.1.25.70.2.5 | fcwSRvcRestoreIncomingCallTimer | 1 | 1 | The value of this object is the time between a new connection request and the reception of the corresponding call connected packe… |
| 1.3.6.1.4.1.866.20.1.25.70.2.6 | fcwSRvcRestoreOutgoingCallDelay | 1 | 1 | When it is not possible to restore the network connection, the standard forces to not use the called reference number during the … |
| 1.3.6.1.4.1.866.20.1.25.70.2.7 | fcwSRvcKWindowSize | 1 | 1 | The value of this object indicates the maximum number (K) of sequentially numbered I frames that the equipment may have outstandi… |
| 1.3.6.1.4.1.866.20.1.25.70.2.8 | fcwSRvcFastSelectUse | 1 | 1 | The value of this object specifies whether the equipment uses the fast select facility or not. The default value is 'onk'. |
| 1.3.6.1.4.1.866.20.1.25.70.2.10 | fcwSRvcConversionAimedPoint | 1 | 1 | The value of this object indicates whether the 'aimed point' address conversion is enabled or not. This conversion consists in ma… |
| 1.3.6.1.4.1.866.20.1.25.70.2.11 | fcwSRvcConversionIncomingCall | 1 | 1 | The value of this object indicates which address field are converted on an incoming call. The authorized values are : off : no add… |
| 1.3.6.1.4.1.866.20.1.25.70.2.12 | fcwSRvcConversionOutgoingCall | 1 | 1 | The value of this object indicates which address field are converted on an outgoing call. The authorized values are : off : no add… |
| 1.3.6.1.4.1.866.20.1.25.70.2.13 | fcwSRvcConversionAddressCheck | 1 | 1 | The value of this object indicates the behaviour of the equipment when a requested address conversion can not be made because the… |