The value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object indicates, when the
compression is active, whether the scrambling is
enabled or not. The default value is 'off'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fcsnaLvpTrParamCompressScrambling OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates, when the compression is active, whether the scrambling is enabled or not. The default value is 'off'. " ::= { fcsnaLvpTrParameters 32 }
fcsnaLvpTrParamCompressScrambling OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates, when the compression is active, whether the scrambling is enabled or not. The default value is 'off'. " ::= { fcsnaLvpTrParameters 32 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.32.1.20.32.0 | fcsnaLvpTrParamCompressScrambling | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.32.1.20.1 | fcsnaLvpTrParamLinkType | 1 | 1 | frontal must be connected to the a primary link-station or negociable link-station that will become the primary, remote must be c… |
| 1.3.6.1.4.1.866.20.1.32.1.20.2 | fcsnaLvpTrParamBroadcastType | 1 | 1 | This field defines the type of broadcast test frame. The unit sends to a destination to determine the best route |
| 1.3.6.1.4.1.866.20.1.32.1.20.3 | fcsnaLvpTrParamLocalTest | 1 | 1 | This feature is used in 'frontal' mode. If this feature is set to on, and when the internal connection is established, it will se… |
| 1.3.6.1.4.1.866.20.1.32.1.20.4 | fcsnaLvpTrParamCallDirection | 1 | 1 | Frontal mode is called. Remote mode is calling. |
| 1.3.6.1.4.1.866.20.1.32.1.20.5 | fcsnaLvpTrRingNo | 1 | 1 | This field identifies the ring number of the LAN to which the unit connects. |
| 1.3.6.1.4.1.866.20.1.32.1.20.6 | fcsnaLvpTrBridgeNo | 1 | 1 | A unit attached to a Token Ring LAN represents a bridge between the physical LAN ring and the network's virtual ring. |
| 1.3.6.1.4.1.866.20.1.32.1.20.7 | fcsnaLvpTrMacAddressTrans | 1 | 1 | MAC address translation |
| 1.3.6.1.4.1.866.20.1.32.1.20.10 | fcsnaLvpTrParamT1 | 1 | 1 | T1 Reply timer. A link-station uses T1 to detect a failure to receive a required acknowlegment or response. T1 runs when there ar… |
| 1.3.6.1.4.1.866.20.1.32.1.20.11 | fcsnaLvpTrParamN2 | 1 | 1 | The maximum number of transmissions. If the reply timer expires for whatever reason, an S-frame with poll bit set is sent to soll… |
| 1.3.6.1.4.1.866.20.1.32.1.20.12 | fcsnaLvpTrParamT2 | 1 | 1 | Receiver acknowledge timer. The end station uses this timer to delay the seding of an acknowlegment for a received I-frame LPDU. … |
| 1.3.6.1.4.1.866.20.1.32.1.20.13 | fcsnaLvpTrParamN3 | 1 | 1 | Number of I-frame LPDU's received before sending an acknowledgment |
| 1.3.6.1.4.1.866.20.1.32.1.20.14 | fcsnaLvpTrParamNW | 1 | 1 | Number of acknowledgments needed to increment Ww |
| 1.3.6.1.4.1.866.20.1.32.1.20.15 | fcsnaLvpTrParamTW | 1 | 1 | LLC transmit window size. This is maximum number of sequentially numbered Iframe that the link-station may have outstanding at an… |
| 1.3.6.1.4.1.866.20.1.32.1.20.16 | fcsnaLvpTrParamRW | 1 | 1 | LLC receive window size. This is the maximum number of unacknowlegment sequentially numbered I-frame the link-station can receive… |
| 1.3.6.1.4.1.866.20.1.32.1.20.20 | fcsnaLvpTrParamMinRecallTimer | 1 | 1 | Slow call timer. |
| 1.3.6.1.4.1.866.20.1.32.1.20.21 | fcsnaLvpTrParamSubscriberNumber | 1 | 1 | The value of this object is the SB number added to the DNICZO of the equipment to make the calling address in a call sent from th… |
| 1.3.6.1.4.1.866.20.1.32.1.20.22 | fcsnaLvpTrParamReliableVc | 1 | 1 | The value of this object is used to enable the Reliable Virtual Circuit service. The authorized values are : off : no RVC, the VCs… |
| 1.3.6.1.4.1.866.20.1.32.1.20.30 | fcsnaLvpTrParamCompression | 1 | 1 | The value of this object indicates the compression enabling for each direction. The authorized values are : off : no compression, n… |
| 1.3.6.1.4.1.866.20.1.32.1.20.31 | fcsnaLvpTrParamCompressNegotiation | 1 | 1 | The value of this object indicates whether the compression facility is negociated or not and, if negociated, the optional/obligat… |
| 1.3.6.1.4.1.866.20.1.32.1.20.33 | fcsnaLvpTrParamCompressMultiPacketsTimer | 1 | 1 | The value of this object defines the maximum waiting time, in milliseconds by steps of 100 milliseconds , which, if there is not … |
| 1.3.6.1.4.1.866.20.1.32.1.20.40 | fcsnaLvpTrParamCos | 1 | 1 | Class Of Service VBR or UBR. |
| 1.3.6.1.4.1.866.20.1.32.1.20.41 | fcsnaLvpTrParamCir | 1 | 1 | Committed information Rate is the maximum number of bits per seconds which an end station can transmit into the network . This is… |
| 1.3.6.1.4.1.866.20.1.32.1.20.42 | fcsnaLvpTrParamCirMin | 1 | 1 | If the end station is informed about the congestion of the network, this is the minimum CIR that the end station can transmit int… |
| 1.3.6.1.4.1.866.20.1.32.1.20.43 | fcsnaLvpTrParamBc | 1 | 1 | The Committed Burst Size is a measure for the volume of data for which the network will garantee message delivery under normal co… |
| 1.3.6.1.4.1.866.20.1.32.1.20.44 | fcsnaLvpTrParamBe | 1 | 1 | The Excess Burst Size is the maximum amount of uncommitted data in access of Bc that the network will attemp to deliver during a … |