If the end station is informed about the
congestion of the network, this is the minimum CIR
that the end station can transmit into the
network.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
If the end station is informed about the
congestion of the network, this is the minimum CIR
that the end station can transmit into the
network.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fcsnaLvpTrParamCirMin OBJECT-TYPE SYNTAX INTEGER (0..2048000) ACCESS read-write STATUS mandatory DESCRIPTION "If the end station is informed about the congestion of the network, this is the minimum CIR that the end station can transmit into the network. " ::= { fcsnaLvpTrParameters 42 }
fcsnaLvpTrParamCirMin OBJECT-TYPE SYNTAX INTEGER (0..2048000) ACCESS read-write STATUS mandatory DESCRIPTION "If the end station is informed about the congestion of the network, this is the minimum CIR that the end station can transmit into the network. " ::= { fcsnaLvpTrParameters 42 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.32.1.20.42.0 | fcsnaLvpTrParamCirMin | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.32.1.20.1 | fcsnaLvpTrParamLinkType | 1 | 1 | frontal must be connected to the a primary link-station or negociable link-station that will become the primary, remote must be c… |
| 1.3.6.1.4.1.866.20.1.32.1.20.2 | fcsnaLvpTrParamBroadcastType | 1 | 1 | This field defines the type of broadcast test frame. The unit sends to a destination to determine the best route |
| 1.3.6.1.4.1.866.20.1.32.1.20.3 | fcsnaLvpTrParamLocalTest | 1 | 1 | This feature is used in 'frontal' mode. If this feature is set to on, and when the internal connection is established, it will se… |
| 1.3.6.1.4.1.866.20.1.32.1.20.4 | fcsnaLvpTrParamCallDirection | 1 | 1 | Frontal mode is called. Remote mode is calling. |
| 1.3.6.1.4.1.866.20.1.32.1.20.5 | fcsnaLvpTrRingNo | 1 | 1 | This field identifies the ring number of the LAN to which the unit connects. |
| 1.3.6.1.4.1.866.20.1.32.1.20.6 | fcsnaLvpTrBridgeNo | 1 | 1 | A unit attached to a Token Ring LAN represents a bridge between the physical LAN ring and the network's virtual ring. |
| 1.3.6.1.4.1.866.20.1.32.1.20.7 | fcsnaLvpTrMacAddressTrans | 1 | 1 | MAC address translation |
| 1.3.6.1.4.1.866.20.1.32.1.20.10 | fcsnaLvpTrParamT1 | 1 | 1 | T1 Reply timer. A link-station uses T1 to detect a failure to receive a required acknowlegment or response. T1 runs when there ar… |
| 1.3.6.1.4.1.866.20.1.32.1.20.11 | fcsnaLvpTrParamN2 | 1 | 1 | The maximum number of transmissions. If the reply timer expires for whatever reason, an S-frame with poll bit set is sent to soll… |
| 1.3.6.1.4.1.866.20.1.32.1.20.12 | fcsnaLvpTrParamT2 | 1 | 1 | Receiver acknowledge timer. The end station uses this timer to delay the seding of an acknowlegment for a received I-frame LPDU. … |
| 1.3.6.1.4.1.866.20.1.32.1.20.13 | fcsnaLvpTrParamN3 | 1 | 1 | Number of I-frame LPDU's received before sending an acknowledgment |
| 1.3.6.1.4.1.866.20.1.32.1.20.14 | fcsnaLvpTrParamNW | 1 | 1 | Number of acknowledgments needed to increment Ww |
| 1.3.6.1.4.1.866.20.1.32.1.20.15 | fcsnaLvpTrParamTW | 1 | 1 | LLC transmit window size. This is maximum number of sequentially numbered Iframe that the link-station may have outstanding at an… |
| 1.3.6.1.4.1.866.20.1.32.1.20.16 | fcsnaLvpTrParamRW | 1 | 1 | LLC receive window size. This is the maximum number of unacknowlegment sequentially numbered I-frame the link-station can receive… |
| 1.3.6.1.4.1.866.20.1.32.1.20.20 | fcsnaLvpTrParamMinRecallTimer | 1 | 1 | Slow call timer. |
| 1.3.6.1.4.1.866.20.1.32.1.20.21 | fcsnaLvpTrParamSubscriberNumber | 1 | 1 | The value of this object is the SB number added to the DNICZO of the equipment to make the calling address in a call sent from th… |
| 1.3.6.1.4.1.866.20.1.32.1.20.22 | fcsnaLvpTrParamReliableVc | 1 | 1 | The value of this object is used to enable the Reliable Virtual Circuit service. The authorized values are : off : no RVC, the VCs… |
| 1.3.6.1.4.1.866.20.1.32.1.20.30 | fcsnaLvpTrParamCompression | 1 | 1 | The value of this object indicates the compression enabling for each direction. The authorized values are : off : no compression, n… |
| 1.3.6.1.4.1.866.20.1.32.1.20.31 | fcsnaLvpTrParamCompressNegotiation | 1 | 1 | The value of this object indicates whether the compression facility is negociated or not and, if negociated, the optional/obligat… |
| 1.3.6.1.4.1.866.20.1.32.1.20.32 | fcsnaLvpTrParamCompressScrambling | 1 | 1 | The value of this object indicates, when the compression is active, whether the scrambling is enabled or not. The default value i… |
| 1.3.6.1.4.1.866.20.1.32.1.20.33 | fcsnaLvpTrParamCompressMultiPacketsTimer | 1 | 1 | The value of this object defines the maximum waiting time, in milliseconds by steps of 100 milliseconds , which, if there is not … |
| 1.3.6.1.4.1.866.20.1.32.1.20.40 | fcsnaLvpTrParamCos | 1 | 1 | Class Of Service VBR or UBR. |
| 1.3.6.1.4.1.866.20.1.32.1.20.41 | fcsnaLvpTrParamCir | 1 | 1 | Committed information Rate is the maximum number of bits per seconds which an end station can transmit into the network . This is… |
| 1.3.6.1.4.1.866.20.1.32.1.20.43 | fcsnaLvpTrParamBc | 1 | 1 | The Committed Burst Size is a measure for the volume of data for which the network will garantee message delivery under normal co… |
| 1.3.6.1.4.1.866.20.1.32.1.20.44 | fcsnaLvpTrParamBe | 1 | 1 | The Excess Burst Size is the maximum amount of uncommitted data in access of Bc that the network will attemp to deliver during a … |